The disintegration of waste active sludge was investigated by photo‐Fenton processes. A batch study was conducted to evaluate parameters, such as Fe2+ and Fe0 ions and H2O2, governing the activated sludge integration by the photo‐Fenton process. Under optimum conditions, the concentration of soluble chemical oxygen demand (SCOD) with the classical Fenton process (CFP) increased very rapidly in the first five minutes due to the sufficient presence of reaction components in the medium, and then the rate of increase declined. In the modified Fenton process (FTP), the SCOD concentration increased more slowly as metallic iron powder must first be dissolved. The photo‐Fenton process proved to be a feasible and efficient process for the disintegration of waste sludge. 相似文献
A solar-blind ultraviolet photodetector based on Ti-doped Ga2O3/Si p–n heterojunction is demonstrated for the first time. It is found that the heterojunction quality forming between Ga2O3 and Si becomes better after Ti incorporation in Ga2O3. The current–voltage and temporal response measurements show that the detector based on Ti-doped Ga2O3/Si p–n heterojunction has a responsivity of 0.382 A/W and a fast rise time of 73 ms as well, which are much better than those undoped Ga2O3/Si p–n heterojunction analogues.
Journal of Low Temperature Physics - This study modeled and investigated the magnetocaloric effect in Ni2MnGa Heusler alloy characterized by its magnetic entropy change (ΔSm) and its... 相似文献
Neural Computing and Applications - The Cash in Transit (CIT) deals with the money distribution and picking up between depot(s), central bank, bank branches, Automated Teller Machines (ATMs),... 相似文献
In this study, the main objective was to asses the distribution of Cu, Cr, and As in soils adjacent to CCA-treated utility poles in Eastern Blacksea Region of Turkey (Trabzon, Rize and Artvin ) and determine the influence of soil composition.
Surface (0–5 cm) and subsurface soil samples (30–40 cm) were collected near CCA-treated utility poles and control soil samples away from CCA-treated utility poles were also collected. Water holding capacity, pH and mechanical properties of soil samples were determined for both depth levels.
Results showed that Cu, Cr and As concentration in soil samples taken from all three cities in 0–5 cm depth was higher than soil samples taken from 30–40 cm depth. Cu, Cr and As concentrations were much higher in soil samples taken from city of Rize 相似文献
When dealing with a Wireless Sensor and Actuator Network (WSAN) structure, one of the challenging problems is lack of flexibility in such network operations as establishment, management, and configuration. Software-defined Networking (SDN) is a promising technology for a simpler, more flexible, and less overworked network structure. Integration of SDN as a solution into the existing WSAN structures seems to be a strong candidate of deployment solutions for next generation WSAN systems. In order to get enhanced performance results for WSAN systems, we proposed an interface protocol, referred to as WSANFlow, which is responsible for all the communications between SDN controller (SDNC) and SDN-oriented end devices. The SDNC in this approach has the network intelligence and is capable of handling all the control and management operations related to the network. Thus, advanced communication operations can be managed and efficiently optimized efficiently by the SDN controller and then, subsequently, corresponding instructions can be delivered to end devices using the proposed WSANFlow protocol. In the study, we analyzed the proposed framework performance, in terms of power consumption ratio, throughput, and end to end delay metrics. Then, we compared the results with those of a ZigBee-based counterpart for different workloads such as; light, heavy and heavier load which modelizes a video stream of mild parameters. The results show that not only has the overall performance of the existing WSAN system been enhanced, but also control and management operations have been simplified by the proposed model. 相似文献
In this study, the synthesis and application of biocompatible steviol glycosides based polyurethane/poly (ε-caprolactone) (PU/PCL) fibers was performed by electrospinning as a potential wound dressing materials that can be used for the closure of nonhealing wounds. During electrospinning, steviol glycoside-based polyurethane structures were used in blend formation with poly (ε-caprolactone) for easy producibility. Steviol glycosides are a natural abundant and easily accessible source as the main component of the wound dressing material due to their free hydroxyl groups, high biocompatibility, and hydrophilicity. The structure of steviol glycosides is composed of saccharide units and the free OH groups. Thus, steviol glycosides act as a crosslinker within the polyurethane structure and provides mechanical strength. For the production of steviol glycosides based PU/PCL fibers first, the steviol glycosides as a monomer were isolated from the stevia rebudiana. Then, polyurethane structures containing stevia glycoside were synthesized with hexamethylene diisocyanate, lactose and PEG-200 by solution polymerization technique. PCL was added to the prepared polyurethanes in a ratio of 1:2 and formation of nanofiber structure. The prepared wound dressing material was characterized by Fourier transform infrared, atomic force microscopy, and scanning electron microscope techniques. Swelling degree, water content and oxygen permeability assay of the steviol glycosides based PU/PCL wound dressing material was determined. In biocompatibility test, cell viability value of PU/PCL fibrous materials in indirect cytotoxicity test was determined as 86.9% and cell adhesion on hybrid PU/PCL fibers was showed as morphological. In accordance with this target, the steviol glycosides based PU/PCL wound dressing material can be produced easily and low cost. As a result, the wound dressing materials obtained with their high biocompatibility and low costs will be an effective and fast method for the healing of open wounds of diabetics. 相似文献