Inhibition of radical polymerization in solvent‐based systems (security of solvent‐based radical polymerization of PSA‐acrylic in a plant reactor)

This article shows the influence of some chain‐transfer agents as inhibitors for acrylic solvent‐based polymerization. These chain‐transfer agents can offer significant advantages, as outlined below. The following chain‐transfer agents were studied to stop or slow down the polymerization process in the case of a runaway: n‐dodecyl mercaptan, trimethylolpropane‐trimercaptoacetate, phenothiazine, diphenylphenylen diamine, cuprum oxide, isopropanol, toluene, and carbon tetrachloride. Synthesized pressure‐sensitive adhesive based on acrylic polymers and containing 2‐ethylhexyl acrylate, methyl acrylate, and acrylic acid were used for the production of self‐adhesives with high cohesion. The polymerization was accomplished in ethyl acetate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1354–1357, 2003     

Inhibition of nitrification in the packed bed reactors by selected organic compounds

The effect of methanol, acetone, formalin and glucose on the nitrification process in the packed bed reactors has been investigated. For the utilized compounds the inhibition constant K_i was determined according to Dixon's method. The determined values were as follows: methanol K_i = 116.0 mg l^?1; acetone K_i = 804.2 mg l^?1; formalin K_i = 61.5 mg l^?1. The value of K_i for glucose has not been determined because glucose in applied concentration up to 11,325 mg l^?1 had no effect on the nitrification course.     

Characterization of supported Pd-Pt catalysts by chemical probes

The temperature programmed (palladium) hydride decomposition appeared very effective method for diagnosing the extent of alloying in Pd-Pt/SiO₂ catalysts. Introduction of Pt to Pd catalysts moves the TPHD peak gradually towards lower temperatures and the shift in hydride decomposition peak is accompanied by a decrease in the amount of released hydrogen. The catalysts prepared the direct redox method showed much better alloy homogeneity than the samples prepared by coimpregnation. The results of probing with other techniques, i.e. catalytic probing with hydrodechlorination of CCl₂F₂ and XRD, were in line with TPHD data. The catalytic probing showed the presence of synergistic effect, a clear indication of Pd-Pt mixing. XRD data of post-reaction samples showed carbon incorporation into Pd-rich phase, whereas separate Pt-rich phase did not experience any bulk carbiding.     

Ion sputtering and its biomedical applications. Theoretical concepts and practical consequences. Clinical implications and potential use

It is the purpose of the paper to promote the ion beam sputtering technique and its biomedical applications among not only ion beam users but also other research workers, and especially, among biologists and medical doctors. The objectives of this article are threefold. Firstly, it supplies a conceptual background for discussing the main question of this work, i.e. biomedical applications of sputtering. Secondly, the title issue and some related problems, important in the biomedical use, are widely presented and discussed. Finally, clinical implication and potential applications are shown.     

Potential of Silver Nanoparticles in Overcoming the Intrinsic Resistance of Pseudomonas aeruginosa to Secondary Metabolites from Carnivorous Plants

Carnivorous plants are exemplary natural sources of secondary metabolites with biological activity. However, the therapeutic antimicrobial potential of these compounds is limited due to intrinsic resistance of selected bacterial pathogens, among which Pseudomonas aeruginosa represents an extreme example. The objective of the study was to overcome the intrinsic resistance of P. aeruginosa by combining silver nanoparticles (AgNPs) with secondary metabolites from selected carnivorous plant species. We employed the broth microdilution method, the checkerboard titration technique and comprehensive phytochemical analyses to define interactions between nanoparticles and active compounds from carnivorous plants. It has been confirmed that P. aeruginosa is resistant to a broad range of secondary metabolites from carnivorous plants, i.e., naphthoquinones, flavonoids, phenolic acids (MBC = 512 µg mL⁻¹) and only weakly sensitive to their mixtures, i.e., extracts and extracts’ fractions. However, it was shown that the antimicrobial activity of extracts and fractions with a significant level of naphthoquinone (plumbagin) was significantly enhanced by AgNPs. Our studies clearly demonstrated a crucial role of naphthoquinones in AgNPs and extract interaction, as well as depicted the potential of AgNPs to restore the bactericidal activity of naphthoquinones towards P. aeruginosa. Our findings indicate the significant potential of nanoparticles to modulate the activity of selected secondary metabolites and revisit their antimicrobial potential towards human pathogenic bacteria.     

Effect of hydrogen spillover on the hydrogenation of 1-hexene over diluted carbon molecular sieve supported Pt catalyst

Pt supported on a carbon molecular sieve (Pt/CMS) was prepared by pyrolysis of polyfurfuryl alcohol containing pre-reduced Pt particles. The catalysts were characterized by hydrogen chemisorption, XRD, N₂ adsorption/desorption and TEM. Hydrogen chemisorption showed that not all the Pt particles were exposed to H₂ molecules. Oxidation treatment made Pt particles more accessible to H₂. Catalyst activity was evaluated by hydrogenation of 1-hexene. Hydrogen spillover was demonstrated by diluting Pt/CMS with activated carbon or hydrogen type zeolite Y. The initial conversion of 1-hexene was increased from 86.5% to 98.5% and to 100% when Pt/CMS was diluted with activated carbon and hydrogen type zeolite, respectively. The high initial conversion was sustained for 6 h in the presence of diluents while the conversion decreased quickly for Pt/CMS alone.     

Novel pyridinium photoinitiators and their applications for the ultraviolet crosslinking of acrylic pressure‐sensitive adhesives

The demand for ultraviolet (UV)‐crosslinkable pressure‐sensitive adhesives (PSAs) has rapidly been increasing. A variety of different PSAs containing new photoreactive pyridinium derivatives have been evaluated for their effectiveness in improving adhesion and cohesion in UV‐crosslinkable PSAs. PSAs have been evaluated with respect to the tack, peel adhesion, and shear strength. This article summarizes the breakthrough technology used to achieve better performances in UV‐crosslinkable acrylic PSAs. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007