The influence of iodide on glass transition temperature of high-pressure nuclear waste glasses

The glass transition temperature (T_g) is a key parameter to investigate for application in nuclear waste immobilization in borosilicate glasses. T_g for several glasses containing iodine (I) has been measured in order to determine the I effect on T_g. Two series of glass composition (ISG and NH) containing up to 2.5 mol% I and synthesized under high pressure (0.5 to 1.5 GPa) have been investigated using differential scanning calorimetry (DSC). The I local environment in glasses has been determined using X-ray photoelectron spectroscopy and revealed that I is dissolved under its iodide form (I⁻). Results show that T_g is decreased with the I addition in the glass in agreement with previous results. We also observed that this T_g decrease is a strong function of glass composition. For NH, 2.5 mol% I induces a decrease of 24°C in T_g, whereas for ISG, 1.2 mol% decreases the T_g by 64°C. We interpret this difference as the result of the I dissolution mechanism and its effect on the polymerization of the boron network. The I dissolution in ISG is accompanied by a depolymerization of the boron network, whereas it is the opposite in NH. Although ISG corresponds to a standardized glass, for the particular case of I immobilization it appears less adequate than NH considering that the decrease in T_g for NH is small in comparison to ISG.     

Towards deterministic downscaling of SMOS soil moisture using MODIS derived soil evaporative efficiency

A deterministic approach for downscaling ～ 40 km resolution Soil Moisture and Ocean Salinity (SMOS) observations is developed from 1 km resolution MODerate resolution Imaging Spectroradiometer (MODIS) data. To account for the lower soil moisture sensitivity of MODIS surface temperature compared to that of L-band brightness temperature, the disaggregation scale is fixed to 10 times the spatial resolution of MODIS thermal data (10 km). Four different analytic downscaling relationships are derived from MODIS and physically-based model predictions of soil evaporative efficiency. The four downscaling algorithms differ with regards to i) the assumed relationship (linear or nonlinear) between soil evaporative efficiency and near-surface soil moisture, and ii) the scale at which soil parameters are available (40 km or 10 km). The 1 km resolution airborne L-band brightness temperature from the National Airborne Field Experiment 2006 (NAFE'06) are used to generate a time series of eleven clear sky 40 km by 60 km near-surface soil moisture observations to represent SMOS pixels across the three-week experiment. The overall root mean square difference between downscaled and observed soil moisture varies between 1.4% v/v and 1.8% v/v depending on the downscaling algorithm used, with soil moisture values ranging from 0 to 15% v/v. The accuracy and robustness of the downscaling algorithms are discussed in terms of their assumptions and applicability to SMOS.     

Bench-Scale Testing of Nanofiltration for Seawater Desalination

A dual-staged nanofiltration process is being evaluated as an alternative to reverse osmosis for seawater desalination. The primary goal of this system is to reduce energy consumption while producing potable water at an acceptable recovery rate. Investigation of this system at the bench-scale level focused on membrane surface characterization, ion rejection (including boron, bromide, and iodide rejection), and flux decline. Results from this study showed that two commercially available nanofiltration membranes can effectively desalinate seawater. Although fouling was apparent—and resulted in approximately 20% flux decline over 3 days—a critical flux was not identifiable. Operation of the system at different cross-flow velocities revealed the significance of hydrodynamic conditions on the polarization modulus, and hence on membrane performance.     

Toward automatic phenotyping of developing embryos from videos.

We describe a trainable system for analyzing videos of developing C. elegans embryos. The system automatically detects, segments, and locates cells and nuclei in microscopic images. The system was designed as the central component of a fully automated phenotyping system. The system contains three modules 1) a convolutional network trained to classify each pixel into five categories: cell wall, cytoplasm, nucleus membrane, nucleus, outside medium; 2) an energy-based model, which cleans up the output of the convolutional network by learning local consistency constraints that must be satisfied by label images; 3) a set of elastic models of the embryo at various stages of development that are matched to the label images.     

A multipurpose audio watermarking algorithm with synchronization and encryption

We propose a new multipurpose audio watermarking scheme in which two complementary watermarks are used.For audio copyright protection,the watermark data with copyright information or signature are first encrypted by Arnold transformation.Then the watermark data are inserted in the low frequency largest significant discrete cosine transform(DCT) coefficients to obtain robustness performance.For audio authentication,a chaotic signal is inserted in the high frequency insignificant DCT coefficients to detect tampered regions.Furthermore,the synchronization code is embedded in the audio statistical characteristics to resist desynchronization attacks.Experimental results show that our proposed method can not only obtain satisfactory detection and tampered location,but also achieve imperceptibility and robustness to common signal processing attacks,such as cropping,shifting,and time scale modification(TSM).Comparison results show that our method outperforms some existing methods.     

Feature extraction of the first difference of EMG time series for EMG pattern recognition

This paper demonstrates the utility of a differencing technique to transform surface EMG signals measured during both static and dynamic contractions such that they become more stationary. The technique was evaluated by three stationarity tests consisting of the variation of two statistical properties, i.e., mean and standard deviation, and the reverse arrangements test. As a result of the proposed technique, the first difference of EMG time series became more stationary compared to the original measured signal. Based on this finding, the performance of time-domain features extracted from raw and transformed EMG was investigated via an EMG classification problem (i.e., eight dynamic motions and four EMG channels) on data from 18 subjects. The results show that the classification accuracies of all features extracted from the transformed signals were higher than features extracted from the original signals for six different classifiers including quadratic discriminant analysis. On average, the proposed differencing technique improved classification accuracies by 2–8%.     

TEM studies of cross sections of oxidized Fe-25Cr-6Al-La alloy

The oxidation behavior of the alloy Fe–25%Cr–6%Al-RE (rich in lanthanum) was investigated by means of TEM analysis. The results show that after 2 hr oxidation of the alloy, in pure oxygen at 1200° C, La precipitated in the oxide scale at the top of -Al₂O₃ grains and at the grain-boundary regions in the form of tiny particles of hexagonal La₂O₃. These tiny particles prevented aluminum from diffusing toward the surface and suppressed lateral growth of the oxide scale. The rare-earth constituents accelerated the internal oxidation of the alloy during thermal cycling between 1200° C and room temperature. They appeared as particles of aluminum oxide and lanthanum oxide. Particles of cubic La₂O₃ precipitated in the alloy matrix near the oxide scale-metal interface in a direction parallel to grain boundaries.