Effect of PyC interface phase on the cyclic ablation resistance and flexural properties of two-dimensional Cf/HfC composites

Composites based on hafnium carbide and reinforced with continuous naked carbon fiber with and without PyC interface were prepared at low temperature by precursor infiltration and pyrolysis and chemical vapor deposition method. The microstructure, mechanical property, cyclic ablation and fiber bundle push-in tests of the composites were investigated. The results show that after three times ablation cycles, the bending strength of samples without PyC interface decreased by 63.6 %; the bending strength of samples with PyC interface only decreased by 37.8 %. The force displacement curve of the samples with PyC interface presented a well pseudoplastic deformation state. The mechanical behavior difference of two kinds of composites was due to crucial function of PyC interface phase including protection of fiber and weakening of fiber/matrix interface.     

Effects of (Li0.5Sm0.5)/W co-substitution and sintering temperature on the structure and electrical properties of ultrahigh Curie temperature piezoceramics,Ca0.92(Li0.5Sm0.5)0.08Bi2Nb2-xWxO9

With co-substitution of (Li_0.5Sm_0.5) at A site and W at B site, the electrical properties of modified Ca_0.92(Li_0.5Sm_0.5)_0.08Bi₂Nb_2-xW_xO₉ [(CLS)BN-xW, x = 0, 0.015 and 0.03] piezoceramics with ultrahigh Curie temperature (T_C) of > 930 °C were enhanced dramatically. The increased resistivity induced by the co-substitution ensure them to be polarized under an enough high field. Combined with the increase of spontaneous ferroelectric polarization (P_S), the significant enhancements in the piezoelectric, dielectric and ferroelectric properties can be obtained in the composition x = 0.015. Furthermore, the piezoelectric activity (d₃₃) and bulk resistivity (ρ_b) of (CLS)BN-0.015 W can be further enhanced at an appropriate sintering temperature. This optimum composition sintered at 1170 °C shows ultrahigh T_C of ～948 °C, d₃₃ of ～17.3 pC/N and ρ_b of ～6.9 MΩ cm at 600 °C, which are comparable to those of the reported high-temperature Aurivillius piezoceramics with T_C > 850 °C.     

膜级钛系聚酯与锑系聚酯的成膜性能比较

利用流延膜挤出机、拉膜机分别对锑(Sb)系聚酯和钛(Ti)系聚酯进行挤出、拉伸成膜,考察了两种聚酯的成膜性能,对两种聚酯在加工过程中的热稳定性以及薄膜的热性能、力学性能、光学性能、取向结构进行了表征。结果表明:在挤出、拉伸过程中,Ti系聚酯的黏度降高于Sb系聚酯,Ti系聚酯切片的结晶度明显小于Sb系聚酯,但Ti系聚酯薄膜的结晶度与Sb系聚酯薄膜相当;在相同的成膜工艺下,Ti系聚酯薄膜的弹性模量、光学性能与Sb系聚酯薄膜相当,拉伸强度高于Sb系聚酯薄膜,断裂伸长率低于Sb系聚酯薄膜,双折射率大于Sb系聚酯薄膜。     

Scanning tunneling spectroscopic study of monolayer 1T-TaS2 and 1T-TaSe2

Nano Research - The isostructural and isoelectronic transition-metal-dichalcogenides 1T-TaS2 and 1T-TaSe2 are layered materials with intricate electronic structures. Combining the molecular beam...     

9000m顶部驱动钻井装置结构选型研究

为大幅提高钻井效率,针对9 000 m钻井深度对顶驱的设计要求,通过比较顶驱装置关键部分几种典型的结构,提出适合该型号顶部驱动钻井装置的最优结构形式,为后续9 000 m钻井深度顶部驱动钻井装置的研究提供指导和借鉴。     

基于FLUENT的多物理场耦合研究

基于FLUENT的多物理场耦合分析是当前核安全分析的热点问题。本文运用6组缓发中子的点堆动力学模型（PKM）编写了反应堆核功率计算程序，利用外部调用耦合和用户自定义函数（UDF）动态链接库耦合方法分别建立了FLUENT-REALP5耦合分析模型和FLUENT-PKM耦合分析模型，并在单相范围内利用水平分支管道的喷放问题和线性反应性引入的超功率瞬变问题验证了耦合模型的正确性和有效性。本研究的耦合分析方法可以为FLUENT的多物理场核安全分析提供支撑。      

一种北斗联合低轨星座的导航增强方法研究

单纯依靠北斗导航系统提供定位导航授时服务,存在卫星信号落地功率低、易受遮蔽和阻断的不足。针对此问题,研究了一种北斗联合低轨星座实现导航增强的系统架构;提出了一种新的适应严重遮蔽或干扰条件下,基于到达时间(TOA)和到达频率(FOA)联合观测的定位解算算法;对高中低轨混合星座条件下的覆盖特性和精度衰减因子进行了仿真分析。分析结果表明,用户可见星数平均增加了64.2%,位置精度衰减因子(PDOP)平均改善了28.7%。研究结果可为下一代北斗的论证设计与研制建设提供参考借鉴。