Response to Robert G. Easterling

In this article, I derive sufficient conditions for an orthogonal main-effect plan having k factors at S _i levels, i = 1, …, k, to have a minimal number of observations. These sufficient conditions are then used to show that many of the orthogonal main-effect plans given prcviously in the literature have minimal numbers of observations.     

Liquid-liquid extraction and separation of total rare earth (RE) metals from polymetallic manganese nodule leaching solution

The study on the solvent extraction for quantitative and selective separation of total rare earth metals from the polymetallic nodule leach liquor was investigated. The typical leach liquor bearing 0. 094 g/L total rare earth, 0. 23 g/L Mn, 0.697 g/L Cu, 0.2 g/L Fe, 0.01 g/L Co and 0.735 g/L Ni was subjected to the removal iron content by precipitation method using Ca(OH)2 at pH 3.95, prior to solvent extraction of rare earth metals. Three different organo-phosphoric acid reagents(D2EHPA, PC88 A, Cyanex 272) were used to ascertain their performances and selectivity towards the loading of rare earth metals in presence of other base metals. Based on the results of eq. pH effect, the performances of above three extractants followed the order as: D2EHPA>PC88A>Cyanex 272. To ensure the absence of extraction of base metals(Cu, Co, Ni), the eq. pH of the solution was optimized at the level of 2.21, though higher rare earth metal extraction efficiency was observed at higher eq. pH with either of the extractants. The complete process flow diagram for substantial recovery of total rare earth was developed using D2 EHPA. Extraction isotherm plot was constructed at A:O=12:1, 3-stages and pHe=2.21, using 0.8 mol/L D2 EHPA and the predicted condition of this study was further confirmed by 6-Cycles Counter Current Simulation(CCS) study. The stripping of total rare earth from loaded organic phase(LO) was conducted using HCl solution. Mc-Cabe Thiele diagram study carried out at A:O=1:5 using 4 mol/L HCl showed that three theoretical stages were needed for quantitative stripping of total rare earth. The subsequent stripped solution resulted thus led to contain total rare earth of 5.6 g/L indicating a very high enrichment of total metals by solvent extraction(SX) process.     

Ionic mechanisms of action of neurotensin in acutely dissociated neurons from the diagonal band of Broca of the rat

Whole cell recordings were performed on acutely dissociated neurons from the horizontal limb of the diagonal band of Broca (hDBB) from rats to elucidate the ionic mechanisms of action of neurotensin. Neurotensin caused a decrease in whole cell voltage-activated outward currents and failed to elicit a response when Ca2+ influx was blocked by changing the external solution to the one containing 0 mM Ca2+ and 50 microM Cd2+, suggesting the involvement of Ca2+-dependent conductances. Charybdotoxin, a specific blocker of voltage-sensitive calcium-activated K+ channels (IC), caused a decrease in outward currents comparable with that caused by blocking calcium influx and occluded the neurotensin-induced decrease in outward currents. Similarly, 50 microM tetraethylammonium ions also blocked the neurotensin response. Also neurotensin reduced whole cell barium currents (IBa) and calcium currents (ICa). Amiloride and omega-conotoxin GVIA, but not nimodipine, were able to eliminate the neurotensin-induced decrease in IBa. Thus T- and N- but not L-type calcium channels are subject to modulation by neurotensin, and this may account for its effects on IC. The predicted changes in action potential as a result of the blockade of currents through calcium channels culminating into changes in IC were confirmed in the bridge current-clamp recordings. Specifically, neurotensin application led to depolarization of the resting membrane potential, broadening of spike and a decrease in afterhyperpolarization and accommodation. These alterations in action potential characteristics that resulted in increased firing rate and excitability of the hDBB neurons also were produced by application of charybdotoxin. Neurotensin effects on these properties were occluded by 2 - [(1 - 7 - chloro - 4 - quinolinyl) - 5 - (2, 6 - di - methoxyphenyl) pyrazol-3-yl) carbonylamino] tricyclo (3.3.1.1.)decan-2-carboxylic acid, a nonpeptide high-affinity neurotensin receptor antagonist. Neurotensin blockade of IC, possibly through ICa, is a potential physiological mechanism whereby this peptide may evoke alterations in the cortical arousal, sleep-wake cycle, and theta rhythm.     

Identification of seven Treponema species in health- and disease-associated dental plaque by nested PCR

Species-specific nested PCR was used to detect Treponema amylovorum, Treponema denticola, Treponema maltophilum, Treponema medium, Treponema pectinovorum, Treponema socranskii, and Treponema vincentii in dental plaque. Subjects with periodontitis harbored all species, but T. pectinovorum and T. vincentii were not found in plaque from disease-free subjects.     

Brushless DC motor drives supplied by PV power system based on Z-source inverter and FL-IC MPPT controller

This paper discusses operation performance of a water pumping system consist of a brushless dc (BLDC) motor coupled a centrifugal pump and accompanying a Z-source inverter (ZSI) fed by a photovoltaic (PV) array, to be improved. Despite conventional double-stage power converters, this paper proposes utilizing a single-stage ZSI to extract the maximum power of the PV array and supply the BLDC motor simultaneously. Utilizing the ZSI provides some inherent advantages such as high efficiency and low cost, which is very promising for PV systems due to its novel voltage buck/boost capability. In addition, in order to precisely perform the maximum power point tracking (MPPT) of the PV array the fuzzy logic-incremental conductance (FL-IC) MPPT scheme is proposed. The proposed FL-IC MPPT scheme provides enough modification to the conventional IC method to enjoy an appropriate variable step size MPPT control signal for the ZSI. Moreover, direct torque control (DTC) is found more effective in comparison with hysteresis current control with current shaping to drive the BLDC motor, because it benefits from faster torque response, reduced torque ripple, less sensitivity to parameters variations, and simple implementation. In the mean time, due to the frequently variations of the PV power generation; delivered mechanical power to the centrifugal pump is variable. Thus, the BLDC motor should be driven with variable reference speed. In order to improve the speed transient response of the BLDC motor and enhance the energy saving aspect of the system, it should enjoy a high quality dynamic response characteristic. Therefore, to realize these purposes, particle swarm optimization (PSO) has been proposed to regulate the proportional-integral-derivative (PID) parameters of the BLDC motor speed controller. The system configuration, operation principle and control methods are presented in detail. Finally, the proposed system was simulated in different operation conditions of the PV array by computer simulations and the effectiveness of the proposed control strategies has been validated by comparative studies and simulation results.     

Polysilanes: Photochemistry and deep UV lithography

The photochemistry of poly(cyclohexylmethylsilane) (PCHMS) has been studied, and PCHMS homopolymer has been shown to be useful for high resolution, deep UV pattern generation either by using a commercial 1:1 projection printer operating in the deep UV or by an excimer laser stepper at 248 nm. In the case of the excimer laser stepper, images 0.5 μm and smaller have been printed, which represents an improvement over the 0.8 μm limit previously reported for polysilane copolymers.     

Computer Aided Engineering Methods for Implementing the Fastbus Standard

In this paper, we discuss the benefits of using Computer Aided Engineering (CAE) methods for implementing a bus standard (Fastbus, ANSI/IEEE Std 960). We describe the CAE methods, how standard design implementations and reference models complement CAE tools to form an integrated engineering environment, and we propose to use these methods for future standard developments.