Study of the Antioxidative Properties of Several Amino Acid-Type Surfactants and their Synergistic Effect in Mixed Micelle

Cysteine and methionine, two sulfur-containing amino acids (AA), were introduced in their surfactant forms as potential antioxidants. The antioxidative (AOX) properties of lauroyl methionine (C12-Met) and lauroyl cysteine (C12-Cys) was investigated by means of the oxygen radical absorbance capacity assay. Both the surfactants exhibited excellent AOX behavior at the premicellar state and micellar medium. The AOX behavior was found to be comparable for both the surfactants at their premicellar states. However, in micellar medium, C12-Met showed better AOX property than C12-Cys. The AOX power of the surfactants was compared with other previously developed AA-type surfactants. The order of the AOX power was found to be: C12-tryptophan > C12-tyrosine ≈ C12-methionine ≈ C12-cysteine > C12-histidine at the premicellar state and C12-tryptophan > C12-tyrosine > C12-methionine > C12-cysteine > C12-histidine at the micellar state. C12-Cys displayed lower AOX property in micellar medium due to its dimer formation tendency. Based on the HPLC and UPLC-Q-TOF-MS analysis, the dimer formation of C12-Cys was found to be accelerated due to the micellar environment and results into negative synergistic effect on other aromatic AA-type surfactants. However, the presence of C12-His in the micellar solution of C12-Cys resulted no synergistic effect due to stronger H-bonding between the surfactants and resulting less dimer formation.     

Boroxine Nanotubes: Moisture‐Sensitive Morphological Transformation and Guest Release

Boroxines, (R‐BO)₃, which can be easily synthesized via a dehydration reaction of boronic acids, R–B(OH)₂, selectively self‐assemble in toluene into nanofibers, nanorods, nanotapes, and nanotubes, depending on the aromatic substituent (R). Spectroscopic measurements show that the nanotube consists of a J‐aggregate of the boroxine. Humidification converts the morphology from the nanotube to a sheet as a result of the hydrolysis of the boroxine components and subsequent molecular‐packing rearrangement from the J‐aggregate to an H‐aggregate. Such a transformation leads to the compulsive release of guest molecules encapsulated in the hollow cylinder of the nanotube. The hydrolysis and the molecular‐packing rearrangement described above are suppressed by coordination of pyridine to the boron atom, with the resulting moiety acting as a Lewis acid of the boroxine component. The pyridine‐coordinated nanotube is transformed into a helical coil by humidification. Guest release during the nanotube‐to‐helical‐coil transformation is much slower than during the nanotube‐to‐sheet transformation, but faster than from a nanotube that did not undergo morphological transformation. The storage and release of guest molecules from the boroxine nanotubes can be precisely controlled by adjusting the moisture level and the concentration of Lewis bases, such as amines.     

Hydrogen‐bonding interaction between poly(ε‐caprolactone) and low‐molecular‐weight amino compounds

The specific interactions between several low‐molecular‐weight diamino compounds and poly(ε‐caprolactone) (PCL) have been investigated by FT‐IR. It was found that PCL and 3,3′‐diaminodiphenylmethane (3,3′‐DADPM) interact through strong intermolecular hydrogen bonds in the blend. Thermal and mechanical properties of PCL/3,3′‐DADPM blends were investigated by DSC and tensile measurements, respectively. The glass transition temperature of the blend increases while both the melting point and the elongation‐at‐break of the blend decrease with the increase of 3,3′‐DADPM content. Besides 3,3′‐DADPM, several other low‐molecular‐weight compounds containing two amino groups, such as o‐phenylenediamine or 1,6‐diaminohexane, were also added into PCL and the corresponding blend systems were investigated by FT‐IR and DSC. The effect of the chemical structure of the additives on the properties of PCL is discussed. © 2001 Society of Chemical Industry     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Controlling the drug release rate from biocompatible polymers with micro-patterned diamond-like carbon (DLC) coating

During the past year, we have witnessed the evolution of an intense public controversy regarding late thrombosis following implantation of drug eluting stent (DES) in patients with obstructive coronary artery disease. To overcome the problem, DES should possess sufficient biocompatibility and non-thrombogenicity with a controlled drug release system. A new DES composed of biocompatible polymers coated with antithrombogenic diamond-like carbon (DLC) coating was proposed. In this study, the drug release profile of the newly proposed drug eluting system was thoroughly investigated. Three polymers were selected as base drug-reservoir materials: hydrophilic 2-methacryloyloxyethyl phosphorylcholine (MPC), hydrophobic poly (ethylene-co-vinyl acetate) (EVA) and less hydrophobic polyurethane (PU). The three polymers are currently used or studied for biomedical materials, while MPC and DLC were already confirmed as excellent biocompatible materials with antithrombogenicity. After coating the lattice-like patterned DLC on both polymers containing drug, samples were soaked in 2 ml of medium of phosphate-buffered saline with 10% ethanol. The drug release rate was measured by a spectrophotometer. The percentile cover area of patterned DLC on polymers was varied from 0% (without DLC) to 100% (fully covered). The sample without DLC coating presented an initial burst of the drug release from the polymer matrix, whereas the DLC-coated samples inhibited the initial burst release from polymers within the first five days of the experiments. It was found that the drug eluting profiles could be effectively controlled by changing the cover area of micro-patterned DLC coatings on polymers, which may be applicable to the next-generation DES system that eventually prevents late thrombosis.     

Simultaneous single-frequency oscillations on different transitionsand antiphase relaxation oscillation dynamics in laser-diode-pumpedmicrochip LiNdP4O12 lasers

Simultaneous single-frequency oscillations on different transitions have been observed experimentally in a laser-diode-pumped microchip LiNdP₄O₁₂ laser. The peculiar modal input-output characteristics and the antiphase relaxation oscillation dynamics have been reproduced theoretically using rate equations, including the strong spatial localization of population inversions, cross saturation, and resonant reabsorption loss in an unpumped region brought about by the inherent high Nd concentrations     

Pulsed Laser Processing of Carbon and Silicon Clusters and Thin Films

Abstract

Several new processes have been developed for the preparation of fullerenes and thin films by using a pulsed excimer laser. The irradiation of a pulsed KrF excimer laser beam onto a C₆₀ powder target produced single phase C₆₀ thin films when the laser energy fluence was in the range between 40 and 50mJ/cm². By atomic force microscopy, the laser-deposited C₆₀ thin film was verified to have a surface far smoother that the surfaces of films produced by the conventional evaporation method. The stainless steel rods coated with this film exhibited an excellent tribological property. Cluster formation from SiC and other carbides MC_n(M=Ti,W,B) was investigated by laser desorption time-of-flight mass spectrometry. No clear indication was observed for the production of such clusters as (SiC)₆₀ and (M_xC_60-x) from the sintered targets directly as well as from the films laser deposited from the targets. However, C₆₀ and C₇₀ were found to exists in the laser-deposited films, indicating a new applicability of pulsed laser processing for segregative cluster synthesis from solid solution. Preliminiary results on thin film deposition via pulsed ablation of (Ba,Na)_xSi₄₆ clathrate were also presented.     

Shrunk multiline addressing method in a passive‐matrix‐driven liquid powder display

Abstract— A shrunk multiline addressing method (SMLA) in a passive‐matrix‐driven liquid powder display will be discussed. An algorithm to generate SMLA data that effectively reduces the number of scanning lines has been devised. The update time is reduced by 44.5% on average, and this reduction is maintained despite increased sizes of the images. The SMLA data generated by this algorithm is applied to e‐paper panels, thereby confirming the reduction in update time and that the image quality of the panels driven by SMLA is equal to that of conventionally driven ones.