Enhancement of thermal,mechanical, ignition and damping response of magnesium using nano-ceria particles

Magnesium (Mg)-based nanocomposites owing to their low density and biocompatibility are being targeted for transportation and biomedical sectors. In order to support a sustainable environment, the prime aim of this study was to develop non-toxic magnesium-based nanocomposites for a wide spectrum of applications. To support this objective, cerium oxide nanoparticles (0.5?vol%, 1?vol%, and 1.5?vol%) reinforced Mg composites are developed in this study using blend-press-sinter powder metallurgy technique. The microstructural studies exhibited limited amounts of porosity in Mg and Mg-CeO₂ samples (< 1%). Increasing presence of CeO₂ nanoparticles (up to 1.5?vol%) led to a progressive increase in microhardness, dimensional stability, damping capacity and ignition resistance of magnesium. The compressive strengths increased with the increasing addition of the nanoparticles with a significant enhancement in the fracture strain (up to ~48%). Superior energy absorption was observed for all the composite samples prior to compressive fracture. Further, enhancement in thermal, mechanical and damping characteristics of pure Mg is correlated with microstructural changes due to the presence of the CeO₂ nanoparticles.     

Loss performance of tagged and normal ATM cells at a partiallyshared buffer

The loss performance of tagged and normal ATM cells at a first-in-first-out (FIFO) buffer is studied. The authors show that if a partial buffer sharing mechanism is adopted the loss probability of normal cells can be firmly guaranteed, regardless of the traffic intensity of tagged cells     

Evaluation of the efficacy of sequential intravenous-oral administration of pefloxacin in community-acquired lower respiratory tract infections in patients with underlying conditions

We studied the efficacy of sequential intravenous-oral pefloxacin therapy in community-acquired lower respiratory tract infection in 24 patients with one or more underlying conditions. Twenty-eight patients were enrolled into the study but only 24 patients were evaluated. There were 16 males and 8 females with a mean age of 66.9 +/- 11.2 years (mean +/- SD, range 46 to 87 years). The underlying conditions present were bronchiectasis, chronic obstructive lung disease and diabetes mellitus. Patients who were older than 70 years but without any underlying condition were also enrolled. All received 4 days of intravenous pefloxacin 400 mg twice a day followed by oral pefloxacin 400 mg twice a day for another 10 days. Assessment of success was based on clinical, microbiological and radiological improvement. Pefloxacin produced 79.2% clinical cure rate. Another 8.3% showed improvement. Pefloxacin was well tolerated. There were few adverse effects and none of the patients required a change of antibiotic. Pefloxacin was an effective and well tolerated treatment for respiratory tract infection and had the advantage of broad in-vitro antibacterial activity, twice daily dosing and sequential availability in an intravenous and oral formulation.     

Delaminations at the free edge of a composite laminate

The concept of a fracture process zone where damage takes place is used to analyse the delaminations at the free edges of angle ply laminates under uniaxial tension. The use of a fracture process zone removes the singularity in the interlaminar stresses and enables the initiation and growth of delaminations to be modelled for a perfect laminate without any assumed prior defects. Two different models for the stress displacement relationship in the fracture process zone are examined: a constant stress up to critical displacement and a linear relationship. Finite element analysis shows that there is little difference in the predictions obtained from the two models. An approximate analysis is presented for the constant stress stress-displacement model which is shown to agree with a finite element solution and experimental data. Hence it is argued that the approximate method using a constant stress model for the fracture process zone is sufficient for accurate prediction of delaminations.     

Parallel triangulation of a polygon in two calls to the trapezoidal map

We give a parallel method for triangulating a simple polygon by two (parallel) calls to the trapezoidal map computation. The method is simpler and more elegant than previous methods. Along the way we obtain an interesting partition of one-sided monotone polygons. Using the best-known trapezoidal map algorithm, ours run in timeO(logn) usingO(n) CREW PRAM processors.     

FTIR characterization of tropical wood–polymer composites

Wood–polymer composites (WPC) of Geronggang (Cratoxylon arborescens), a light tropical hardwood, impregnated with methyl methacrylate (MMA), methyl methacrylate-co-acrylonitrile (1 : 1; MAN), and styrene-co-acrylonitrile (3 : 2; STAN), were prepared by in situ polymerization using gamma radiation or the catalyst–heat treatment. The FTIR spectra of the three types of WPC, with polymer loadings ranging from 10 to 70%, were compared with that of the wood itself and the respective polymers. Characteristic peaks due to C?O vibration of MMA, C?N stretching of acrylonitrile, and ring stretching and bending of styrene monomers, were prominent in the samples that had higher polymer loadings. For the copolymeric systems, quantitation of the FTIR spectra of these characteristic peaks enabled calculations of incorporated acrylonitrile and styrene monomers in the composites to be made. The FTIR spectra of the residues remaining, after exhaustive extraction to remove homopolymer, showed that graft copolymerization of wood components with acrylonitrile and styrene monomers was possible, but not with MMA. Composites prepared by the two methods, gamma radiation and the catalyst–heat treatment, were shown to be chemically very similar.     

Performance evaluation of ProJet multi-material jetting 3D printer

The purpose of this paper is to quantitatively evaluate the performance of a multi-material jetting 3D printer, ProJet 5500X, especially the capability for micro manufacturing. Unlike other single material 3D printer, ProJet 5500X uses photopolymers as the build material and wax as the support material. The building performance was evaluated by building a modified version of the standard benchmark model with a high-resolution printing mode. The dimensional error, forming quality and surface roughness of the printed parts have been measured and analysed using a microscope, a 3D coordinate measuring machine and a surface profilometer. Using wax as the support material, fine features as small as 0.25?mm, lateral features and sharper edges could all be properly built, despite the rough side surfaces observed in the printed part. Identical features (3?mm pins) were precisely built with an accuracy of 15?µm. The research provides first-hand detailed performance knowledge in the ProJet system for understanding the working principle and comparison with other 3D printing systems.     

Analysis of an efficient rule-based motion planning system for simulating human crowds

This paper proposes a rule-based motion planning system for agent-based crowd simulation, consisting of sets of rules for both collision avoidance and collision response. In order to avoid an oncoming collision, a set of rules for velocity sampling and evaluation is proposed, which aims to choose a velocity with an expected time to collision larger than a predefined threshold. In order to improve the efficiency over existing methods, the sampling procedure terminates upon finding an appropriate velocity. Moreover, the proposed motion planning system does not guarantee a collision-free movement. In case of collision, another set of rules is also defined to direct the agent to make a corresponding response. The experiment results show that the proposed approach can be applied in different scenarios, while making the simulation execution efficient.     

An MDD-based generalized arc consistency algorithm for positive and negative table constraints and some global constraints

A table constraint is explicitly represented as its set of solutions or non-solutions. This ad hoc (or extensional) representation may require space exponential to the arity of the constraint, making enforcing GAC expensive. In this paper, we address the space and time inefficiencies simultaneously by presenting the mddc constraint. mddc is a global constraint that represents its (non-)solutions with a multi-valued decision diagram (MDD). The MDD-based representation has the advantage that it can be exponentially smaller than a table. The associated GAC algorithm (called mddc) has time complexity linear to the size of the MDD, and achieves full incrementality in constant time. In addition, we show how to convert a positive or negative table constraint into an mddc constraint in time linear to the size of the table. Our experiments on structured problems, car sequencing and still-life, show that mddc is also a fast GAC algorithm for some global constraints such as sequence and regular. We also show that mddc is faster than the state-of-the-art generic GAC algorithms in Gent et al. (2007), Lecoutre and Szymanek (2006), Lhomme and Régin (2005) for table constraint.     

Formulating efficient software solution for digital image processing system

Digital image processing systems are complex, being usually composed of different computer vision libraries. Algorithm implementations cannot be directly used in conjunction with algorithms developed using other computer vision libraries. This paper formulates a software solution by proposing a processor with the capability of handling different types of image processing algorithms, which allow the end users to install new image processing algorithms from any library. This approach has other functionalities like capability to process one or more images, manage multiple processing jobs simultaneously and maintain the manner in which an image was processed for later use. It is a computational efficient and promising technique to handle variety of image processing algorithms. To promote the reusability and adaptation of the package for new types of analysis, a feature of sustainability is established. The framework is integrated and tested on a medical imaging application, and the software is made freely available for the reader. Future work involves introducing the capability to connect to another instance of processing service with better performance. Copyright © 2015 John Wiley & Sons, Ltd.