A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Balanced corpus of contemporary written Japanese

The balanced corpus of contemporary written Japanese (BCCWJ) is Japan’s first 100 million words balanced corpus. It consists of three subcorpora (publication subcorpus, library subcorpus, and special-purpose subcorpus) and covers a wide range of text registers including books in general, magazines, newspapers, governmental white papers, best-selling books, an internet bulletin-board, a blog, school textbooks, minutes of the national diet, publicity newsletters of local governments, laws, and poetry verses. A random sampling technique is utilized whenever possible in order to maximize the representativeness of the corpus. The corpus is annotated in terms of dual POS analysis, document structure, and bibliographical information. The BCCWJ is currently accessible in three different ways including Chunagon a web-based interface to the dual POS analysis data. Lastly, results of some pilot evaluation of the corpus with respect to the textual diversity are reported. The analyses include POS distribution, word-class distribution, entropy of orthography, sentence length, and variation of the adjective predicate. High textual diversity is observed in all these analyses.     

Investigation report of geotechnical disaster on river area due to typhoon landfall three times on Okhotsk region,Hokkaido, Japan

For one week from August 17 to 23, 2016, three consecutive typhoons made landfall in Hokkaido for the first time on record. These typhoons and the front they stimulated brought record-breaking torrential rain over the eastern part of Hokkaido. To investigate the damage to grounds and rivers resulting from this rainfall, the Japan Society of Civil Engineers (JSCE) and the Japanese Geotechnical Society (JGS) formed a disaster research group to conduct an investigation. This report provides the results of the investigation into damage to the grounds of areas along the Tokoro River of the Okhotsk region, Hokkaido, that suffered from this tremendous and diverse disaster. Specifically, the report describes the situation of the levees which were broken and eroded by the overflowing water, the shape of the levee bodies, the levee body soil properties examined by observation of the sections, as well as the occurrence of sand boiling and air blows. The washout of road embankments as well as damage to road bridge mounting fills and abutment backfills were also investigated. The investigation has demonstrated the need to clarify the resistance of the abutment backfills and levee bodies to flowing water as well as the geotechnical predominant factors in order to clarify the mechanisms behind erosion and washout, the need to review new measures that allow for the scale of sand boiling and resultant changes in levee body stability, and the fact that the existing embankments were able to temporarily suppress the flooding water which had spilled over from the river. Furthermore, although it has been identified that the findings of a study on an embankment washout associated with a tsunami can be applied to measures taken against the overflowing water, it has also been found necessary to clarify the predominant geotechnical factors using model tests and to use a more sophisticated analytical approach to establish a geotechnical stability review as soon as possible in order to prevent the levees and embankments from being eroded and washed out due to overflowing water.     

Determination of magnetic anisotropy constants for bubble garnet epitaxial films using field orientation dependence in ferromagnetic resonances

Cubic magnetocrystalline anisotropy constant K₁ as well as uniaxial anisotropy constant K_u and gyromagnetic ratio γ are precisely determined for (111) magnetic garnet epitaxial films from measurements on FMR field orientation dependence. Strict FMR conditions are derived from total free energy expressions, where the differences between magnetization direction and applied field direction are taken into consideration. By applying magnetic field in (110) plane, FMR is measured to obtain the three best fitting parameters of K₁, K_u and γ. Present analysis is compared with Cronemeyer et al's analysis. Influence of sample misalignment on measurement accuracy is also presented. Similarly, for (110) garnet films with orthorhombic magnetic anisotropy, measurements are carried out for two crystallographic planes of (001) and (110), and the four best fitting parameters of K₁, K_u, δ and γ are determined.     

Chiral recognition ability of oligopeptide derivatives consisting of glutamyl residues

The effect of the constituting amino acid residue [Glu(OBzl)] number on the chiral recognition ability was investigated. Chiral recognition sites were prepared from oligopeptide derivatives (constituting amino acid residue number = three–five) by adopting alternative molecular imprinting. It was made clear that with a constituting amino acid residue number of four, the tetrapeptide derivative of Glu(OBzl) is the best candidate material to generate a chiral recognition site among eight types of oligopeptide derivatives in the study. The affinity constant between Ac‐L ‐Trp and a chiral recognition site ranged from 3.4 × 10³ to 1.08 × 10⁴ mol^?1 dm³, depending on the number of Glu(OBzl) residues in an oligopeptide derivative. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1302–1309, 2005     

Biocompatibility of a-C:H film coating for synthetic vascular graft

Amorphous hydrogenated carbon (a-C:H) films have many excellent properties such as biocompatibility, anti-corrosion, and chemical stability. Therefore, there are many reports on application of a-C:H film as surface modification technique for biomaterials. However, it is difficult to deposit a-C:H film on complex structures such as artificial heart blood pump and synthetic vascular grafts. In our previous work, we have developed an electrode which is adapted to such irregular structures for plasma CVD technique.In this study, a-C:H film was deposited on a synthetic vascular graft inner-wall by r.f. plasma CVD technique with cylindrical electrode. The purpose of such coating is improvement of biocompatibility of the vascular graft. The biocompatibility of the a-C:H film was evaluated by cytocompatibility and plasma protein adhesion. For the a-C:H film deposition, cytocompatibility and protein adsorbent of the vascular grafts were improved for biological response under cell culture with mouth fibroblasts and plasma proteins (albumin, fibrinogen, and globulin), respectively. This study indicates that the a-C:H films coatings is expected to surface modification for medical appliances.     

Reconstitution of hepatic tissue architectures from fetal liver cells obtained from a three-dimensional culture with a rotating wall vessel bioreactor

Reconstitution of tissue architecture in vitro is important because it enables researchers to investigate the interactions and mutual relationships between cells and cellular signals involved in the three-dimensional (3D) construction of tissues. To date, in vitro methods for producing tissues with highly ordered structure and high levels of function have met with limited success although a variety of 3D culture systems have been investigated. In this study, we reconstituted functional hepatic tissue including mature hepatocyte and blood vessel-like structures accompanied with bile duct-like structures from E15.5 fetal liver cells, which contained more hepatic stem/progenitor cells comparing with neonatal liver cells. The culture was performed in a simulated microgravity environment produced by a rotating wall vessel (RWV) bioreactor. The hepatocytes in the reconstituted 3D tissue were found to be capable of producing albumin and storing glycogen. Additionally, bile canaliculi between hepatocytes, characteristics of adult hepatocyte in vivo were also formed. Apart from this, bile duct structure secreting mucin was shown to form complicated tubular branches. Furthermore, gene expression analysis by semi-quantitative RT-PCR revealed the elevated levels of mature hepatocyte markers as well as genes with the hepatic function. With RWV culture system, we could produce functionally reconstituted liver tissue and this might be useful in pharmaceutical industry including drug screening and testing and other applications such as an alternative approach to experimental animals.