The influence of iodide on glass transition temperature of high-pressure nuclear waste glasses

The glass transition temperature (T_g) is a key parameter to investigate for application in nuclear waste immobilization in borosilicate glasses. T_g for several glasses containing iodine (I) has been measured in order to determine the I effect on T_g. Two series of glass composition (ISG and NH) containing up to 2.5 mol% I and synthesized under high pressure (0.5 to 1.5 GPa) have been investigated using differential scanning calorimetry (DSC). The I local environment in glasses has been determined using X-ray photoelectron spectroscopy and revealed that I is dissolved under its iodide form (I⁻). Results show that T_g is decreased with the I addition in the glass in agreement with previous results. We also observed that this T_g decrease is a strong function of glass composition. For NH, 2.5 mol% I induces a decrease of 24°C in T_g, whereas for ISG, 1.2 mol% decreases the T_g by 64°C. We interpret this difference as the result of the I dissolution mechanism and its effect on the polymerization of the boron network. The I dissolution in ISG is accompanied by a depolymerization of the boron network, whereas it is the opposite in NH. Although ISG corresponds to a standardized glass, for the particular case of I immobilization it appears less adequate than NH considering that the decrease in T_g for NH is small in comparison to ISG.     

Abscopal Effect of Frozen Autograft Reconstruction Combined with an Immune Checkpoint Inhibitor Analyzed Using a Metastatic Bone Tumor Model

We evaluated the abscopal effect of re-implantation of liquid nitrogen-treated tumor-bearing bone grafts and the synergistic effect of anti-PD-1 (programmed death-1) therapy using a bone metastasis model, created by injecting MMT-060562 cells into the bilateral tibiae of 6–8-week-old female C3H mice. After 2 weeks, the lateral tumors were treated by excision, cryotreatment using liquid nitrogen, excision with anti-PD-1 treatment, and cryotreatment with anti-PD-1 treatment. Anti-mouse PD-1 4H2 was injected on days 1, 6, 12, and 18 post-treatment. The mice were euthanized after 3 weeks; the abscopal effect was evaluated by focusing on growth inhibition of the abscopal tumor. The re-implantation of frozen autografts significantly inhibited the growth of the remaining abscopal tumors. However, a more potent abscopal effect was observed in the anti-PD-1 antibody group. The number of CD8+ T cells infiltrating the abscopal tumor and tumor-specific interferon-γ (IFN-γ)-producing spleen cells increased in the liquid nitrogen-treated group compared with those in the excision group, with no significant difference. The number was significantly higher in the anti-PD-1 antibody-treated group than in the non-treated group. Overall, re-implantation of tumor-bearing frozen autograft has an abscopal effect on abscopal tumor growth, although re-implantation of liquid nitrogen-treated bone grafts did not induce a strong T-cell response or tumor-suppressive effect.     

Engineering of Lipid Nanoparticles by the Multifunctionalization of the Surface with Amino Acid Derivatives for the Neutralization of a Target Toxic Peptide

Protein affinity reagents (e.g., antibodies) are often used for basic research, diagnostics, separations, and disease therapy. Although a lot of “synthetic” protein affinity reagents have been developed as a cost-effective alternative to antibodies, their low biocompatibility is a considerable problem for clinical application. Lipid nanoparticles (LNP) represent a highly biocompatible drug delivery agent. However, little has been reported that LNP itself works as a protein affinity reagent in living animals. Here, LNP is engineered for binding to and neutralizing a target toxic peptide in living animals by multifunctionalization with amino acid derivatives. Multifunctionalized LNP (MF-LNP) is prepared using amino acid derivative-conjugated lipids. Optimized MF-LNP exhibits nanomolar affinity to the target toxic peptide and inhibits toxic peptide-dependent hemolysis and cytotoxicity. In addition, MF-LNP captures and neutralizes the toxic peptide after intravenous injection in the bloodstream; in addition, MF-LNP does not release the toxic peptide in the accumulated organ. These results reveal the potential of using LNP as a highly biocompatible protein affinity reagent such as an antidote.     

Crack growth characteristics of carbon nanotube-based polymer composites subjected to cyclic loading

This paper presents the characterization of crack growth in carbon nanotube (CNT)-based polymer composites under fatigue loading. Fatigue crack growth tests were performed on single-edge cracked plate specimens of CNT/polycarbonate composites at room temperature and liquid nitrogen temperature (77 K). An elastic–plastic finite element analysis was also conducted to determine the J-integral range. The crack growth rate data were expressed in terms of the J-integral range, and the effect of nanotube addition on the fatigue crack growth behavior was examined. In addition, possible mechanisms of the crack growth in the nanocomposites are discussed based on microscopic observations of the specimen fracture surfaces.     

Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

Delamination growth mechanisms in woven glass fiber reinforced polymer composites under Mode II fatigue loading at cryogenic temperatures

The purpose of this research is to characterize the cryogenic delamination growth behavior in woven glass fiber reinforced polymer (GFRP) composite laminates subjected to Mode II fatigue loading. Mode II fatigue delamination tests were performed at room temperature, liquid nitrogen temperature (77 K) and liquid helium temperature (4 K) using the four-point bend end-notched flexure (4ENF) test method, and the delamination growth rate data for the woven GFRP laminates were obtained. The energy release rate range was determined by the finite element method. Microscopic examinations of the specimen sections and fracture surfaces were also carried out. The present results are discussed to obtain an understanding of the fatigue delamination growth mechanisms in the woven GFRP laminates under Mode II loading at cryogenic temperatures.     

The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water

Stress corrosion crack growth rates of 304L stainless steel after one-directionally warm-rolled along the longitudinal (L) direction were measured in oxygenated and deoxygenated pure water at 288 °C. The fracture mode is mainly intergranular in the Transverse-longitudinal (T-L) orientation specimen, while it is occasionally intergranular in the Longitudinal-transverse (L-T) orientation specimen. The crack growth rates in the T-L orientation are higher than those in the L-T orientation in both oxygenated and deoxygenated environments, which is related to the effective cracking growth path as the result of microstructural anisotropy and applied loading direction.     

Beam-shape correction in deployable phased arrays

Deployable phased-array antennas-antennas that are receiving great attention-have a major problem in that they possess the possibility of an incomplete deployment and antenna shape distortion. These effects cause a displacement of the element antenna positions that results in deviation of the phase distribution on the antenna aperture, eventually causing antenna beam deflection. We have investigated how to correct this beam deflection by observing the phased-array antenna from certain directions. There are cases when more than one observation point is necessary to carry out the proposed method depending on the extent of the antenna shape distortion and the number of the points is consulted. This correction method makes it possible to correct the deflection of the main beam and also to determine the displacement of relative element positions     

Physico-chemical properties of glycyrrhizic acid in aqueous media. I. Surface-active properties and formation of molecular aggregates (author's transl)

As shown in 138 embryos and fetuses in the 40-285 mm crown-rump length range, carpal and carpal-metacarpal "fusions" arise from incomplete separation of the cartilaginous precursors rather than from failure of initiation, thus accounting for the "fusions" seen in postnatal radiographs and the grooves that are evident enough in adult fusions. Radiographs selected from over 20,000 apparently normal individuals provide postnatal counterparts for the prenatal examples shown in histological sections.     

Height of the spout of a gas plume discharging from a metal melt

In the present investigation, the height of the spout of a gas plume discharging from the surface of a metal melt has been measured in a laboratory model involving mercury and in real steel ladles. The spout geometry strongly fluctuates with time. This has to be taken into account in the measuring method and data evaluation. Long-term averages of the spout profile and momentary maximum height values have been determined, and it has been found that their nondimensional values are of similar size in the model and in the steel ladle. An engineering formula is presented for the estimation of maximum spout height in argon stirring.