Characterization of Dog Glutathione Transferase P1-1, an Enzyme Relevant to Veterinary Medicine

Glutathione transferases (GSTs) form a family of detoxication enzymes instrumental in the inactivation and elimination of electrophilic mutagenic and carcinogenic compounds. The Pi class GST P1-1 is present in most tissues and is commonly overexpressed in neoplastic cells. GST P1-1 in the dog, Canis lupus familiaris, has merits as a marker for tumors and as a target for enzyme-activated prodrugs. We produced the canine enzyme CluGST P1-1 by heterologous bacterial expression and verified its cross-reactivity with antihuman-GST P1-1 antibodies. The catalytic activity with alternative substrates of biological significance was determined, and the most active substrate found was benzyl isothiocyanate. Among established GST inhibitors, Cibacron Blue showed positive cooperativity with an IC₅₀ value of 43 nM. Dog GST P1-1 catalyzes activation of the prodrug Telcyta, but the activity is significantly lower than that of the human homolog.     

Antifungal activity of edible coating made from chitosan and lactoperoxidase system against Phomopsis sp. RP257 and Pestalotiopsis sp. isolated from mango

Lactoperoxidase system (LPOS) was incorporated into chitosan solutions (0.5, 1, and 1.5%) to protect mangoes against two strains of fungi. Coating solutions effectiveness in vitro (in Petri dish) and in vivo (on mango) were studied on fungal (Phomopsis sp. RP257 and Pestalotiopsis sp.) growth isolated from mango cv Amelie. In vitro, chitosan concentration at least 1% containing or not LPOS effectively inhibited Pestalotiopsis sp. growth at 100%. Presence of LPOS or Lactoperoxydase system with iodine (LPOSI) in chitosan at 0.5% increased the percentage of inhibition from 26 to 93%. Edible films with LPOS inhibited Phomopsis sp. RP257 particularly when LPOS was incorporated in chitosan concentrations of 1 and 1.5%. Iodine did not influenced antifungal activity of LPOS against Pestalotiopsis sp. but decreased activity antifungal toward Phomopsis sp. RP257. The properties (water vapor permeability and mechanical properties) of chitosan films were not significantly changed by the incorporation of the enzyme system. in vivo condition, chitosan coating at 1 and 1.5% with or without enzyme system was sufficient to inhibit totally (100%) Pestalotiopsis sp. and was 60% efficient against Phomopsis sp. with chitosan only at 1 and 1.5%. However, when coating solution mainly at 1 and 1.5% was enhanced by LPOS with or without iodine, it inhibited totally (100%) Phomopsis sp. RP257. The presence of iodine slightly reduced antifungal activity against Phomopsis sp. RP257.     

Survey of data-selection methods in statistical machine translation

Statistical machine translation has seen significant improvements in quality over the past several years. The single biggest factor in this improvement has been the accumulation of ever larger stores of data. We now find ourselves, however, the victims of our own success, in that it has become increasingly difficult to train on such large sets of data, due to limitations in memory, processing power, and ultimately, speed (i.e. data-to-models takes an inordinate amount of time). Moreover, the training data has a wide quality spectrum. A variety of methods for data cleaning and data selection have been developed to address these issues. Each of these methods employs a search or filtering algorithm to select a subset of the data, given a defined set of feature functions. In this paper we provide a comparative overview of research in this area based on application scenario, feature functions and search method.     

Design and Laboratory Evaluation of a Sequential Spot Sampler for Time-Resolved Measurement of Airborne Particle Composition

A new sampling approach has been developed to enable affordable, time-resolved monitoring of particulate chemical composition, and more generally to provide concentrated samples of airborne particles. Using a newly developed, moderated water-based condensational growth technology, individual particle samples are deposited in a 1-mm diameter dry “spot.” The moderated condensation technology enables this collection with minimal temperature rise, providing robust collection for volatile constituents. Measured collection efficiencies are above 95% for particles in the size range from 0.010 μm to 2.5 μm. A set of 20 or more time-resolved samples, plus blanks, may be collected onto a multiwell collection plate. For chemical analysis the plate is returned to the laboratory, and placed directly into a modified autosampler, without extraction or preparation. The autosampler handles the addition of eluent, extraction, and sample injection without user manipulation. This article presents the design and laboratory evaluation of a 1.5 L/min sampling rate version of this system.

Copyright 2014 American Association for Aerosol Research     

A novel resist technique based on secondary amines for the printing of cotton with reactive dyes

In an earlier paper we have described sulphite‐based resist printing using ink‐jet procedures. This paper describes an alternative approach to sulphite inactivation of vinylsulphone dyes by using secondary amines to inactivate fluoro‐s‐triazine dyes while maintaining the reactivity of the vinylsulphone dyes. Monofluoro‐s‐triazine reactive dyes are padded onto cotton fabrics and then deactivated by ink‐jet printing with a suitable secondary amine formulation to produce a white image on a solid ground colour after appropriate fixation and soap‐off procedures have been undertaken. A coloured image can be achieved by overprinting the resist‐printed areas with a coloured ink formulation containing a β‐sulphatoethylsulphone‐type reactive dye; such dyes form a β‐bis‐alkylaminoethylsulphone dye via reaction with the secondary amine. This latter dye ‘unblocks’ during a mildly acidic steaming process to form the reactive vinylsulphone dye, and so, unlike the monofluoro‐s‐triazine dye, is not deactivated towards subsequent covalent reaction with the cotton substrate.     

The reaction of sodium cyanate with wool and nylon and its effect on subsequent dyeing

This paper describes the reaction of the simplest isocyanate, isocyanic acid, conveniently generated in situ from sodium cyanate, with nucleophilic carboxylate and amino residues in polyamide fibres. Changing the pH conditions greatly affects the outcome of these reactions: under acidic conditions the carboxylate residues are selectively carbamoylated, whereas under neutral conditions both residues are carbamoylated. Such modifications greatly change the dyeing behaviour of the treated substrates. The carboxylate carbamoylation reaction leads to the formation of amides rather than the carbamoylcarboxylate, which is a reactive intermediate.     

Contamination of potable roof-collected rainwater in Auckland, New Zealand

One-hundred and twenty-five domestic roof-collected rainwater supplies in four rural Auckland districts were investigated in a cross-sectional survey to determine water quality. Samples of cold faucet water were analysed for physico-chemical and microbiological determinands, including metals (zinc, copper and lead), bacterial indicator organisms--heterotrophic plate count (HPC), total coilforms (TC), faecal coliforms (FC), enterococci (ENT), bacterial pathogens including Salmonella spp., Legionella spp., Campylobacter spp., Aeromonas spp. and the protozoa, Cryptosporidium and Giardia. Twenty-two supplies (17.6%) exceeded one or more of the maximum acceptable values (MAV) or maximum guideline values for chemical determinands of the New Zealand Drinking Water Standards (NZDWS) and 70 (56.0%) supplies exceeded the microbiological criteria of < 1 FC/100 mL. Eighteen supplies (14.4%) exceeded the NZDWS MAV for lead of 0.01 mg/L and three (2.4%) exceeded that for copper, of 2 mg/L. Those supplies with lead or galvanised iron comprising part of the roof or collecting system were more likely to show lead contamination (p = 0.019) as were those supplies with a pH less than 7 (p = 0.013). The presence of the indicator organisms HPC, TC, FC and ENT were all significantly correlated with one another. Aeromonas spp. were identified in 20 (16.0%) supplies. There was a positive association between the presence of Aeromonas and the bacterial indicator organisms. Households reporting at least one member with gastrointestinal symptoms in the month prior to sampling, were more likely to have Aeromonas spp. identified in their water supply than those households without symptoms (odds ratio 3.22, 95% CI 1.15-9.01, p = 0.021). Salmonella typhimurium was detected in one of 115 (0.9%) supplies. Legionella spp. and Campylobacter spp. were not detected. There were 50 supplies sampled for protozoa (sampling criteria: > or = 30 FC or > or = 60 ENT). Cryptosporidium oocysts were detected in 2 (4%) of these. Giardia was not detected. This study demonstrates that roof-collected rainwater systems provide potable supplies of relatively poor physiochemical and microbiological quality in the Auckland area. Further research is required on Aeromonas spp. as potential indicators of both microbiological quality and health risk along with design and maintenance strategies to minimise contamination of potable roof-collected rainwater supplies.     

Use of Potassium for Treatment and Control of Zebra Mussel Infestation in Industrial Fire Protection Water Systems

Zebra mussels, first discovered in the Great Lakes in 1988, have frequently been detected in fire protection systems. However, the potential for large-scale infestations has not been established. It is clear that even small numbers of mussels can cause problems in areas that have small-diameter piping or in sprinkler system nozzles, if shells are flushed down-stream during emergency use.This paper will discuss the development of a method of zebra mussel control that limited interference with normal system operations when used at Niagara Mohawk's Dunkirk Steam Station. Because oxygen is often depressed in these systems and limits mussels survival and growth, it was established that by monitoring oxygen alone, or in combination with veliger or mussel larval monitoring, high-risk areas for mussel infestation could be determined. In previous laboratory research, it had already been determined that concentrations of potassium in excess of 100 mg/L would lead to quick mortality in adult zebra mussels. These results, along with a biofouling risk assessment completed at Dunkirk Steam Station, were used to develop and implement a successful treatment of the high-risk areas in the plant's fire protection water systems using potassium in the form of potash as the controlling agent.     

A digital wind gust recorder

The instrument was a byproduct of an undergraduate final year project on wind power which was carried out by the Department of Mechanical Engineering of the University of Liverpool.The windmill test site was on an exposed, rocky island where there was no history of weather recording but a long tradition of violent winds.Field experience during the winter months suggested that corrosion fatigue arising from wind buffeting and salt spray would rank equally with maximum wind pressure as criteria of failure and if modern materials, so convenient for forming aerodynamic surfaces, were to be used then limited life concepts would need to be considered. This called for more knowledge of wind variations at the test site. A complete wind spectrum taken on chart recording instruments would have been ideal but since such such refined devices were not available the instrument to be described was designed.The only wind measuring instrument which was available was a rotating cup anemometer. This supplied an alternating voltage proportional to its rotational speed. It also operated a gear driven microswitch which could give an integrated “miles of wind” reading on an electromagnetic counter.Briefly the e.m.f. generated by the anemometer (Fig. 1) was matched against a pre-set voltage corresponding to the required gust velocity. When this was exceeded an appropriate counter was operated. Only the rising e.m.f. was significant. The subsequent fall was ignored. Initially three stages were incorporated which reported the gusts rising through forty, fifty and sixty knots, respectively. These recorded on separate counters. All basic settings were based on pitot-static speed determinations in a wind tunnel.     

DYNAMICS OF SEDIMENT-ASSOCIATED METALS IN A HIGHLY URBANISED CATCHMENT: BRADFORD, WEST YORKSHIRE

Urban watercourses are potential hazards because of their rapid flow changes, poor water quality and contaminated sediments. This study is a preliminary field investigation into fine sediment-associated metal contamination and its transport dynamics in a highly urbanised catchment in West Yorkshire, UK. Spatial and temporal changes in the concentration of channel-bed sediment-associated metals are investigated, and the fluxes of selected suspended sediment-associated metals, during an extreme high flow event, are determined. Channel-bed sediments were more contaminated at the most heavily urbanised sites. Data suggest that contaminated bed sediments could accumulate and possibly become increasingly contaminated between high-flow events, prior to being flushed from the system. Fluxes of contaminated suspended sediments were very high at the peak of the high flow event. The spatial and temporal dynamics of contaminated fine sediment which were identified in this study could inform planners with regard to future monitoring strategies.