Correlation between motion of source bender element and feedback signal induced by self-monitoring

Since the introduction of bender element tests to soil testing, the reliability of the estimated travel time has been the most serious problem. The author has previously shown a potential solution whereby removing the response of the bender element subsystem from the whole response could dramatically improve the accuracy of the travel time estimation. In order to lay the foundation for estimating the response of the bender element subsystem, this paper examines the correlation between the displacements of the element and the induced feedback signals by employing a self-monitoring element. The response of the self-monitoring element is modeled as a transfer function involving two internal transfer functions that relate the input signals to the displacements and the displacements to the feedback signals, respectively. Using a laser displacement sensor, the displacements are directly measured through the entire surface and reveal the three-dimensional bending motion of the element oscillating in both longitudinal and width directions. The feedback signals are similar to, but inconsistent with, the tip displacements, and an attempt is made to correct the feedback signals. Finally, a conclusion is given on the potential for estimating the response of the bender element subsystem using the self-monitoring element.     

Effect of morphology on shear viscosity for binary blends of polycarbonate and polystyrene

The structure and rheological properties of binary blends of polycarbonate (PC) and polystyrene (PS) were investigated using various PS samples with different molecular weights, namely PS1k (M_w = 1,000), PS53k (M_w = 53,000), and PS240k (M_w = 240,000). The blends with PS53k and PS240k show phase-separated structures, whereas the blend with PS1k is miscible. The shear viscosity decreases greatly on addition of PS53k and PS240k, especially at high shear rates, which would be a great advantage at processing operations. Because the nonlinear response occurs in the small strain region for multilayered films of PC and PS240k, the origin of the significant viscosity drop for the phase-separated system is interfacial slippage at the phase boundary.     

Adaptation to climate change and conservation of biodiversity using green infrastructure

In recent years, we have experienced mega‐flood disasters in Japan due to climate change. In the last century, we have been building disaster prevention infrastructure (artificial levees and dams, referred to as “grey infrastructure”) to protect human lives and assets from floods, but these hard protective measures will not function against mega‐floods. Moreover, in a drastically depopulating society such as that in Japan, farmland abandonment prevails, and it will be more difficult to maintain grey infrastructure with a limited tax income. In this study, we propose the introduction of green infrastructure (GI) as an adaptation strategy for climate change. If we can use abandoned farmlands as GI, they may function to reduce disaster risks and provide habitats for various organisms that are adapted to wetland environments. First, we present a conceptual framework for disaster prevention using a hybrid of GI and conventional grey infrastructure. In this combination, the fundamental GI, composed of forests and wetlands in the catchment (GI‐1) and additional multilevel GIs such as flood control basins that function when floodwater exceeds the planning level (GI‐2) are introduced. We evaluated the flood attenuation function (GI‐1) of the Kushiro Wetland using a hydrological model and developed a methodology for selecting suitable locations of GI‐2, considering flood risk, biodiversity and the distribution of abandoned farmlands, which represent social and economic costs. The results indicated that the Kushiro Wetland acts as a large natural reservoir that attenuates the hydrological peak discharge during floods and suitable locations for introducing GI‐2 are concentrated in floodplain areas developing in the downstream reaches of large rivers. Finally, we discussed the network structure of GI‐1 as a hub and GI‐2 as a dispersal site for conservation of the Red‐crowned Crane, one of the symbolic species of Japan.     

Investigation of high-temperature chemical interaction of calcium silicate insulation and cesium hydroxide

ABSTRACT

The interaction of cesium hydroxide and a calcium silicate insulation material was experimentally investigated at high-temperature conditions to evaluate the possibility of unprecedented cesium retention under severe accident of boiling water reactor. The temperature where the interactions occurred and chemical species of cesium after the interaction were examined in this study. A thermogravimetry equipped with differential thermal analysis was used to analyze thermal events in the samples of mixed calcium silicate and cesium hydroxide under oxidizing and reducing atmospheric conditions with a maximum temperature of 1100°C. Before being mixed with cesium hydroxide, a part of calcium silicate was pretreated at high temperature to evaluate the effect of possible structural changes of this material due to a preceding thermal history and also for the sake of thermodynamic evaluation. It was found that for the original material, as xonotlite (Ca₆Si₆O₁₇(OH)₂) crystal, the endothermic reaction with cesium hydroxide occurred over the temperature range 575–730°C; meanwhile, for heat-treated material, which varied the crystal phase of original material to wollastonite (CaSiO₃), the interaction occurred over the temperature range 700–1100°C. The X-ray diffraction analyses have indicated that both types of calcium silicates regardless of the atmospheric conditions, cesium aluminum silicate, CsAlSiO₄, was formed with aluminum in the samples as an impurity or adduct. The insolubility of this formed cesium suggested the potency of cesium localization in the primary containment vessels on other structural materials that possess similar elements to that of calcium silicate insulation; hence, an effective decommissioning process could be developed.     

In Vivo Electrophysiology of Peptidergic Neurons in Deep Layers of the Lumbar Spinal Cord after Optogenetic Stimulation of Hypothalamic Paraventricular Oxytocin Neurons in Rats

The spinal ejaculation generator (SEG) is located in the central gray (lamina X) of the rat lumbar spinal cord and plays a pivotal role in the ejaculatory reflex. We recently reported that SEG neurons express the oxytocin receptor and are activated by oxytocin projections from the paraventricular nucleus of hypothalamus (PVH). However, it is unknown whether the SEG responds to oxytocin in vivo. In this study, we analyzed the characteristics of the brain–spinal cord neural circuit that controls male sexual function using a newly developed in vivo electrophysiological technique. Optogenetic stimulation of the PVH of rats expressing channel rhodopsin under the oxytocin receptor promoter increased the spontaneous firing of most lamina X SEG neurons. This is the first demonstration of the in vivo electrical response from the deeper (lamina X) neurons in the spinal cord. Furthermore, we succeeded in the in vivo whole-cell recordings of lamina X neurons. In vivo whole-cell recordings may reveal the features of lamina X SEG neurons, including differences in neurotransmitters and response to stimulation. Taken together, these results suggest that in vivo electrophysiological stimulation can elucidate the neurophysiological response of a variety of spinal neurons during male sexual behavior.     

Study of Cuprate Superconductivity Using the Particle Number Conserving Bogoliubov-de Gennes Equations: ARPES and STS Images From Surface Plus Bulk Layers Model

Journal of Superconductivity and Novel Magnetism - We theoretically study the superconductivity in hole-doped cuprate superconductors by employing a model composed of surface and bulk CuO $$_2$$...     

Disinfection of Legionella pneumophila by ultrasonic treatment with TiO2

An ultrasonic treatment system, using a TiO₂ photocatalyst, was used to disinfect Legionella pneumophila. A kinetic study of the process indicates that TiO₂ significantly improves the disinfection process. The concentrations of viable cells were reduced to 6% of the initial concentrations in the presence of 0.2 g/ml TiO₂ after a 30 min of treatment period, while only an 18% reduction was observed in the absence of TiO₂. The potency of the disinfection could be enhanced, to some extent, by increasing the amount of TiO₂ used. Cell concentrations were decreased by an order of 3 within 30 min of treatment in the presence of 1.0 g/ml TiO₂. The disinfection power in the presence of TiO₂ versus Al₂O₃ was also compared and the findings showed that TiO₂ induced a higher cell killing. No significant effect of initial cell concentration on the disinfection was found in the range of 10²-10⁷ CFU/ml after a 30 min of treatment period. The mechanism of cell killing was investigated by examining the effects of OH radical scavengers such as ascorbic acid, histidine and glutathione. The disinfection power was reduced in samples that contained these radical scavengers, thus indicating the importance of OH radicals.     

Terpendole E and its Derivative Inhibit STLC‐ and GSK‐1‐Resistant Eg5

Terpendole E is first natural product found to inhibit mitotic kinesin Eg5, but its inhibitory mechanism remains to be revealed. Here, we report the effects of terpendole E and 11ketopaspaline (a new natural terpendole E analogue) on the Eg5–microtubule interaction and in several Eg5 mutants. 11‐Ketopaspaline is a shunt product from terpendole E, and it shows potent inhibitory activity against the microtubule‐stimulated ATPase activity of Eg5. Unlike other Eg5 inhibitors, such as S‐trityl‐L ‐cysteine (STLC) and GSK‐1, both terpendole E and 11‐ketopaspaline only partially inhibited Eg5–microtubule interaction. Furthermore, terpendole E and 11‐ketopaspaline inhibited several Eg5 mutants that are resistant to STLC (Eg5^D130A, Eg5^L214A) or GSK‐1 (Eg5^I299F, Eg5^A356T), but with the same extent of inhibition against wild‐type Eg5. Because Eg5^D130A and Eg5^L214A show cross‐resistance to most known Eg5 inhibitors, which bind the L5 loop, these results suggest that terpendole E and its analogues have a different binding site and/or inhibitory mechanism to those for L5 loop‐binding type Eg5 inhibitors.     

Filter-based energy-resolved X-ray computed tomography with a clinical imager

Filter-based energy-resolved X-ray computed tomography (CT) is an approach for implementing energy-resolved CT imaging using a flat-panel-detector-based cone-beam system. In this study, we performed experiments with a 20-cm-diameter phantom on a clinical X-ray imager. The material density results showed good agreement with the ideal values. We also propose an improved method for obtaining the detector response function and the X-ray spectrum, which requires fewer measurements and will be practical for future clinical use. Issues such as scatter and image noise remain to be addressed.