Selective Coating of SnS on the Bio‐Inspired Moth‐Eye Patterned PEDOT:PSS Polymer Films

A new strategy for the selective coating of tin sulfide (SnS) on the surface of moth‐eye patterned (MEP) conducting polymer film is studied by considering the optical properties of the antireflective moth‐eye pattern and flexibility of polymer films. The semiconductor SnS is selectively coated on the surface of MEP microdomes of poly(3,4‐ethylenedioxythiophene) poly(styrene‐sulfonate) (PEDOT:PSS) film. The SnS coated MEP film is obtained by using pore selectively SnS thin layer functionalized polystyrene honeycomb‐patterned porous (HCP) film as a template. Aqueous PEDOT:PSS solution is poured on the SnS functionalized HCP films and detached for the fabrication of SnS coated MEP films. The films show a satisfactory photo‐responsive property under solar stimulated light illumination due to the antireflective MEP structure of PEDOT film and homogenous SnS coating on the surface of the conducting polymer.     

Ethylene polymerization over MgO‐supported zirconocene catalysts

Supported zirconcene catalysts on a new support, MgO, were prepared and tested in ethylene polymerization. Three types of impregnation methods were employed to find an optimum supporting method for MgO. The direct impregnation of Cp₂ZrCl₂ on MgO showed low metal loading and polymerization activity, while the catalyst had a higher metal loading and polymerization activity when MgO was treated with methylaluminoxane (MAO) before supporting. Treatment of MgO with MAO during the supporting step invoked two types of catalytic sites, which was evidenced by the bimodal molecular weight distribution of the polymer products. MgO is considered to have potential as a support for metallocenes.     

1.04 GBd low EMI digital video interface system using small swingserial link technique

In a high-resolution flat panel system, a conventional interface that directly connects a liquid crystal display (LCD) controller to a flat panel cannot overcome the problems of excess EMI (electromagnetic interference) and power caused by full-swing transmission signals in parallel lines. This paper presents a high-speed digital video interface system implemented with a low-cost standard CMOS (complimentary metal-oxide-semiconductor) technology that can mitigate EMI and power problems in high-resolution flat panel display systems. The combined architecture of the high-speed, small number of parallel lines and low-voltage swing serial interface can support resolutions from VGA (640×480 pixels) up to XGA (1024×768 pixels) with significant power improvement and drastic EMI reduction. To support high-speed, low-voltage swing signaling and overcome channel-to-channel skew problems, a robust data recovery system is required. The proposed digital phase-locked loop enables robust skew-insensitive data recovery of up to 1.04 GBd     

Exploiting ILP, TLP, and DLP with the polymorphous trips architecture

The Tera-op reliable intelligently adaptive processing system (TRIPS) architecture seeks to deliver system-level configurability to applications and runtime systems. It does so by employing the concept of polymorphism, which permits the runtime system to configure the hardware execution resources to match the mode of execution and demands of the compiler and application.     

Protective effects of green tea extracts (polyphenon E and EGCG) on human cervical lesions

We investigated clinical efficacy of green tea extracts (polyphenon E; poly E and (-)-epigallocatechin-3-gallate [EGCG]) delivered in a form of ointment or capsule in patients with human papilloma virus (HPV) infected cervical lesions. Fifty-one patients with cervical lesions (chronic cervicitis, mild dysplasia, moderate dysplasia and severe dysplasia) were divided into four groups, as compared with 39 untreated patients as a control. Poly E ointment was applied locally to 27 patients twice a week. For oral delivery, a 200 mg of poly E or EGCG capsule was taken orally every day for eight to 12 weeks. In the study, 20 out of 27 patients (74%) under poly E ointment therapy showed a response. Six out of eight patients under poly E ointment plus poly E capsule therapy (75%) showed a response, and three out of six patients (50%) under poly E capsule therapy showed a response. Six out of 10 patients (60%) under EGCG capsule therapy showed a response. Overall, a 69% response rate (35/51) was noted for treatment with green tea extracts, as compared with a 10% response rate (4/39) in untreated controls (P<0.05). Thus, the data collected here demonstrated that green tea extracts in a form of ointment and capsule are effective for treating cervical lesions, suggesting that green tea extracts can be a potential therapy regimen for patients with HPV infected cervical lesions.     

Central GABAA and GABAB receptor modulation of basal and stress-induced plasma interleukin-6 levels in mice

The development of control strategies for loiasis is of crucial importance in endemic areas and depends heavily on the accurate identification of occult-infected individuals. A polymerase chain reaction (PCR) and nested polymerase chain reaction (nested PCR) were developed and based on sequences of the repeat 3 region (15r3) of the gene encoding a Loa loa 15-kD protein. The assays was performed on 20 blood samples from occult-infected subjects and 30 from field-collected amicrofilaremic individuals. The size of the initial PCR product was 396 basepairs (bp). When this initial amplification using primers 15r3(1) and 15r3(2) was carried out for 30 cycles, the PCR products from three of the 20 occult-infected and five of the 30 amicrofilaremic individuals were visualized after electrophoresis by staining the gel with ethidium bromide. Subsequent Southern blotting and hybridization with the specific probe revealed hybridization in 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples but only after two days of exposure of the blot to the x-ray film. When the nested PCR was carried out (product size = 366 bp, primers 15r3(3) and 15r3(4)), 19 of 20 occult-infected and 23 of 30 amicrofilaremic samples that were positive by Southern hybridization of the initial PCR products were strongly positive by staining with ethidium bromide. Qualitative Southern blotting of the nested PCR products using the same probe previously described confirmed the ethidium bromide staining results after a very short exposure time of 4 hr. These results demonstrate that the nested PCR amplification product is specific and that its sensitivity in detecting occult loiasis is 95%. This approach has significant promise for the screening of large human populations for active loiasis without the requirement for blotting and hybridization of the PCR products.     

Energy efficiency in cloud computing based on mixture power spectral density prediction

Due to the budget and environmental issues, adaptive energy efficiency receives a lot of attention these days, especially for cloud computing. In the previous research, we developed a combined methodology based on nonparametric prediction and convex optimization to produce proactive energy efficiency-oriented solution. In this work, the predictive analysis was further enhanced by deriving the mixture power spectral density to model the complex cloud monitoring statistics. By engaging the improved technique to the predictive analysis, the prediction process was more adaptive to handle the fluctuation in system utilization. As a consequence, the optimization process could subsequently produce more appropriate setting for energy savings. After the infrastructure setting has been made available, the instruction of virtual machine migration was created and implemented by the cloud orchestrator. This instruction condensed the services into the pool of active facilities, satisfying the objective of power efficiency. Eventually, any physical machine out of the power configuration would be gradually terminated. Compared to our former method, the effectiveness of the proposed technique has been proven by cutting down 4.92% of energy consumption, while still maintaining a similar quality of services.

     

Low temperature OMVPE growth of ZnSe withTertiary-butyl allyl selenide and dimethylzinc-triethylamine

The growth of high quality ZnSe by organometallic vapor phase epitaxy (OMVPE) has been investigated fortertiary-butyl allyl selenide (tBASe), combined with dimethylzinc-triethylamine (DMZn : NEt₃). Single crystalline ZnSe films were grown on GaAs at temperature as low as 350°C with a reasonable growth rate (~1 µm/h). Secondary ion mass spectrometry (SIMS) spectra show a negligible carbon incorporation in ZnSe films from tBASe even at high VI/II ratio, in contrast the carbon concentration of 10²¹ cm^-3 in ZnSe films grown from diallyl selenide (DASe)and methylallylselenide (MASe). Good surface morphology, crystalline and interface quality of ZnSe on (001) GaAs are confirmed by scanning electron microscopy, double crystal diffractometry (DCD) and Rutherford backscattering spectrometry (RBS). Photoluminescence at 10K shows sharp near-band-edge excitonic spectra.     

Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis

Tool design is carried out for a multi-stage deep drawing and ironing process of a rectangular cup with the large aspect ratio using the result of the finite element analysis. The analysis incorporates three-dimensional continuum elements for an elasto-plastic finite element method with the explicit time integration scheme using LS-DYNA3D. The analysis simulates the five-stage deep drawing and ironing process with the thickness control of the cup wall. Simulation is performed in order to investigate the failure by tearing during the forming process at the initial state of tool design. The analysis reveals that the difference of the drawing ratio within the cross section induces non-uniform metal flow which causes severe local extension. The irregular contact condition between the blank and the die also induces non-uniform metal flow which causes local wrinkling. This paper identifies such unfavorable mechanism in the rectangular cup drawing with ironing and proposes a new tool design with the guideline for modification in the design of the process and the sequential tool shape. The finite element analysis result with the improved tool design confirms that the proposed design not only reduces the possibility of failure but also improves the quality of a deep-drawn product. The numerical result shows fair coincidence with the experimental result.