Ceramics based on calcium phosphates substituted with magnesium ions for bone regeneration

In this study, chemical precipitation methods were used to obtain ceramic materials doped with magnesium ions in order to improve the regeneration properties of materials used for tissue engineering. Two different ratios of magnesium oxide were used to dope the ceramic powder, more precisely 5% and 10%. The synthesized materials were characterized to determine the calcination temperature of the precursor powder by means of thermal analysis; to determine the mineralogical composition, X-ray diffraction was employed and the scanning electron microscopy was used to determine the microstructure. To make use of these ceramics as biomaterials, viability and proliferation cell tests have been performed. Since synthetic materials have several limitations with regard to medical applications, the materials based on HAp substituted with Mg ions are a promising solution for the regeneration of bone defects because they have a similar bone structure. The presence of Mg in the material proves to be beneficial because this element plays an important role in bone cell regeneration, and more specifically, in stimulating osteoblast proliferation. The materials synthesized in this work present a suitable morphology for uses in bone regeneration because they offer to cells a friendly environment for growth and anchoring.     

Synthesis and thermal,mechanical and gas permeation properties of aromatic polyimides containing different linkage groups

Two series of aromatic polyimides containing various linkage groups based on 2,7‐bis(4‐aminophenoxy)naphthalene or 3,3′‐dimethyl‐4,4′‐diaminodiphenylmethane and different aromatic dianhydrides, namely 4,4′‐(4,4′‐isopropylidenediphenoxy)bis(phthalic anhydride), 4,4′‐(hexafluoroisopropylidene)bis(phthalic anhydride), 3,3′,4,4′ benzophenonetetracarboxylic dianhydride, 9,9‐bis[4‐(3,4‐dicarboxyphenoxy)phenyl]fluorene dianhydride and 4,4′‐(4,4′‐hexafluoroisopropylidenediphenoxy)bis(phthalic anhydride), were synthesized and compared with regard to their thermal, mechanical and gas permeation properties. All these polymers showed high thermal stability with initial decomposition temperature in the range 475–525 °C and glass transition temperature between 208 and 286 °C. Also, the polymer films presented good mechanical characteristics with tensile strength in the range 60–91 MPa and storage modulus in the range 1700–2375 MPa. The macromolecular chain packing induced by dianhydride and diamine segments was investigated by examining gas permeation through the polymer films. The relationships between chain mobility and interchain distance and the obtained values for gas permeability are discussed. © 2014 Society of Chemical Industry     

Influence of T5 heat treatment on the microstructure and lubricated wear behavior of ternary ZnAl40Cu2 and quaternary ZnAl40Cu2Si2.5 alloys

A ternary ZnAl40Cu2 and a quaternary ZnAl40Cu2Si2.5 alloys were produced by permanent mold casting and subjected to T5 heat treatment at a temperature of 150 °C for 24 hours. The structural, mechanical and lubricated wear properties of these alloys were investigated in the as-cast and heat-treated conditions and the results were compared with those of SAE 65 (CuSn12) plain bearing bronze. Microstructure of the ternary alloy consisted of aluminum-rich α, eutectoid conversion product of α+η and ϵ phase located in the interdendritic channels. In addition to these phases, silicon particles were observed in the microstructure of the quaternary alloy. T5 heat treatment caused a considerable amount of reduction in the hardness, tensile strength and wear resistance of ZnAl40-based ternary and quaternary alloys, but improved their ductility and stability. These alloys in the as-cast and heat-treated conditions exhibited lower wear volume or higher wear resistance than SAE 65 bearing bronze. Among the experimental alloys, the optimum mechanical properties and wear performance were obtained from ZnAl40Cu2Si2.5 alloy in both as-cast and heat-treated conditions. Adhesion appeared to be the main wear mechanism for the ZnAl40-based alloys, but abrasion dominated the wear of SAE 65 bronze.     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Study of thermal behavior of polyimides containing pendent-substituted azobenzene units

Thermal stability and degradation kinetic of the polyimides containing pendent-substituted azobenzene units were investigated by thermogravimetric analysis in nitrogen at different heating rates. Freeman–Carroll, Coats–Redfern and Flynn–Wall–Ozawa methods were utilized to obtain the kinetic parameters (activation energy E _a, pre-exponential factor A and order of reaction n) or variation of activation energy with conversion degree from thermogravimetric and derivative thermogravimetric curves. The thermogravimetric analysis revealed that the decomposition of azopolyimides proceeds in three or four stages, regardless of heating rate.     

Propham mineralization in aqueous medium by anodic oxidation using boron-doped diamond anode: influence of experimental parameters on degradation kinetics and mineralization efficiency

This study aims the removal of a carbamate herbicide, propham, from aqueous solution by direct electrochemical advanced oxidation process using a boron-doped diamond (BDD) anode. This electrode produces large quantities of hydroxyl radicals from oxidation of water, which leads to the oxidative degradation of propham up to its total mineralization. Effect of operational parameters such as current, temperature, pH and supporting electrolyte on the degradation and mineralization rate was studied. The applied current and temperature exert a prominent effect on the total organic carbon (TOC) removal rate of the solutions. The mineralization of propham can be performed at any pH value between 3 and 11 without any loss in oxidation efficiency. The propham decay and its overall mineralization reaction follows a pseudo-first-order kinetics. The apparent rate constant value of propham oxidation was determined as 4.8×10⁻⁴ s⁻¹ at 100 mA and 35 °C in the presence of 50 mM Na₂SO₄ in acidic media (pH: 3). A general mineralization sequence was proposed considering the identified oxidation intermediates.     

Effects of pretreatment and various operating parameters on permeate flux and quality during ultrafiltration of apple juice

The central composite design with a quadratic model was used to investigate the effect of temperature (20–40 °C) and transmembrane pressure (TMP) (100–300 kPa) as well as pretreatment with gelatin and bentonite (0:0–300:1500 mg L^?1) on permeate flux and fouling resistance during ultrafiltration of apple juice. The changes in some physicochemical properties were also investigated. Pretreatment of apple juice with gelatin and bentonite and an increase in the temperature and TMP significantly improved the permeate flux. In general, physicochemical properties of apple juice other than polyphenolics were not affected by the applied parameters. Using 150 mg L^?1 of gelatin and 750 mg L^?1 of bentonite for fining significantly reduced the total phenolic content and so did the fouling resistance. Fouling resistance also decreased with increasing temperature, and increasing pressure increased the fouling resistance.     

Betulinic Acid in Complex with a Gamma-Cyclodextrin Derivative Decreases Proliferation and in Vivo Tumor Development of Non-Metastatic and Metastatic B164A5 Cells

Betulinic acid, a very promising anti-melanoma agent, has very low water solubility that causes low bioavailability. To overcome this inconvenience, a highly water-soluble cyclodextrin was used (octakis-[6-deoxy-6-(2-sulfanyl ethanesulfonic acid)]-γ-cyclodextrin). The complex was physico-chemically analyzed using differential scanning calorimetry (DSC), X-ray and scanning electron microscopy (SEM) methods and then in vitro tested for its antiproliferative activity by the MTT assay and by cell cycle analysis. Finally, the complex was tested in vivo using an animal model of murine melanoma developed in C57BL/6J mice, where it caused a reduction in tumor volume and weight. The study revealed the beneficial influence of betulinic acid inclusion into the cyclodextrin in terms of antiproliferative activity and in vivo tumor development.