Instructional texts rewritten by five expert teams: Revisions and retention improvements.

700 undergraduates were tested in 3 experiments on original or rewritten versions of 52 instructional texts about Army job tasks, general science, philosophy, and history. Five experts had rewritten various sets of the texts and stated hypotheses about the efficacious features of their revisions. We tested their hypotheses and several others. Recall and recognition tests were given immediately and after a 24-hr delay. Results showed that revisions made by 3 of the 5 experts improved retention of text information. The kind and number of revisions and improvements varied across the text sets. Most expert hypotheses were not supported, and they made many revisions they were declaratively unaware of. Some of our hypotheses about the revision features were supported, but different features were effective for different sets of texts. It was concluded that some experts have effective knowledge about improving instructional text, but it exists primarily in procedural form. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

Stability robustness of networked control systems with respect to packet loss

This paper is concerned with stability analysis of discrete-time networked control systems over a communication channel subject to packet loss whose behavior is modeled by an i.i.d Bernoulli process with a packet dropping probability bounded by a constant. A necessary and sufficient condition for stability is obtained. A packet dropping margin is introduced as a measure of stability robustness of a system against packet dropping, and a formula for it is derived. A design method is proposed for achieving a large margin subject to a constraint that the system has a set of prescribed nominal closed-loop poles.     

Alu and L1 sequence distributions in Xq24-q28 and their comparative utility in YAC contig assembly and verification

The contents of Alu- and L1-containing TaqI restriction fragments were assessed by Southern blot analyses across YAC contigs already assembled by other means and localized within Xq24-q28. Fingerprinting patterns of YACs in contigs were concordant, and using software based on that of M. V. Olson et al. (1986, Proc. Natl. Acad. Sci. USA 83: 7826) to analyze digitized data on fragment sizes, fingerprinting itself could establish matches among about 40% of a test group of 435 YACs. At 100-kb resolution, both repetitive elements were found throughout the region, with no apparent enrichment of Alu or L1 in DNA of G compared to that found in R bands. However, consistent with a random overall distribution, delimited regions of up to 100 kb contained clusters of repetitive elements. The local concentrations may help to account for the reported differential hybridization of Alu and L1 probes to segments of metaphase chromosomes.     

Human Milk Antibodies against S1 and S2 Subunits from SARS-CoV-2, HCoV-OC43, and HCoV-229E in Mothers with a Confirmed COVID-19 PCR,Viral SYMPTOMS,and Unexposed Mothers

Background: Preexisting immunity to SARS-CoV-2 could be related to cross-reactive antibodies to common human-coronaviruses (HCoVs). This study aimed to evaluate whether human milk antibodies against to S1 and S2 subunits SARS-CoV-2 are cross-reactive to S1 and S2 subunits HCoV-OC43 and HCoV-229E in mothers with a confirmed COVID-19 PCR test, in mothers with previous viral symptoms during COVID-19 pandemic, and in unexposed mothers; Methods: The levels of secretory IgA (SIgA)/IgA, secretory IgM (SIgM)/IgM, and IgG specific to S1 and S2 SARS-CoV-2, and reactive to S1 + S2 HCoV-OC43, and HCoV-229E were measured in milk from 7 mothers with a confirmed COVID-19 PCR test, 20 mothers with viral symptoms, and unexposed mothers (6 Ctl1-2018 and 16 Ctl2-2018) using ELISA; Results: The S2 SARS-CoV-2 IgG levels were higher in the COVID-19 PCR (p = 0.014) and viral symptom (p = 0.040) groups than in the Ctl1-2018 group. We detected a higher number of positive correlations between the antigens and secretory antibodies in the COVID-19 PCR group than in the viral symptom and Ctl-2018 groups. S1 + S2 HCoV-OC43-reactive IgG was higher in the COVID-19 group than in the control group (p = 0.002) but did not differ for the other antibodies; Conclusions: Mothers with a confirmed COVID-19 PCR and mothers with previous viral symptoms had preexisting human milk antibodies against S2 subunit SARS-CoV-2. Human milk IgG were more specific to S2 subunit SARS-CoV-2 than other antibodies, whereas SIgA and SIgM were polyreactive and cross-reactive to S1 or S2 subunit SARS-CoV-2.     

Hydrogen embrittlement of high strength steel electroplated with zinc-cobalt alloys

Slow strain rate tests were performed on quenched and tempered AISI 4340 steel to measure the extent of hydrogen embrittlement caused by electroplating with zinc-cobalt alloys. The effects of bath composition and pH were studied and compared with results for electrodeposited cadmium and zinc-10%nickel. It was found that zinc-1%cobalt alloy coatings caused serious hydrogen embrittlement (EI 0.63); almost as severe as that of cadmium (EI 0.78). Baking cadmium plated steel for 24 h at 200 °C gave full recovery of mechanical properties but specimens plated with zinc-1%cobalt and then baked still failed in 89% of the time of unplated controls. It was shown that hydrogen uptake and embrittlement could be controlled by depositing thin layers of cobalt or nickel at the steel/coating interface. For example, the least embrittlement was caused by zinc-10%nickel (EI 0.037) due to a nickel rich layer with very low hydrogen diffusion coefficient that formed during the initial stages of electroplating. Similarly, a 0.5 μm nickel layer was effective in lowering the embrittlement caused by zinc-1%cobalt to that of zinc-10%nickel. Furthermore, a 0.5 μm cobalt layer deposited before a zinc-1%cobalt coating gave virtually 100% recovery of mechanical properties after baking.     

Determination of the vapor pressures of select polychlorinated dibenzo-p-dioxins and dibenzofurans at 75-275 °C

Vapor pressures were determined for several polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) at 75-275 °C, extending the available literature data to more relevant temperature regions and providing the first experimental data for 2,3,7-trichlorodibenzo-p-dioxin (2,3,7-TriCD). A modification of the effusion technique, based upon controlling the diffusion of the target compound and subsequent high resolution gas chromatography/low resolution mass spectrometry (HRGC/LRMS) analysis, was proven comparable to other accepted methods for determining the vapor pressures of semi-volatile organic compounds (SVOCs). Vapor pressures for octachlorodibenzo-p-dioxin (OCDD) and octachlorodibenzofuran (OCDF) were in excellent agreement with those reported in literature. The application of the current method for the vapor pressure determinations of eight polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) in the extended temperature range (up to 275 °C) is reported. The extension of the vapor pressures to such temperatures, unprecedented for the PCDDs/Fs, is important for vapor-particle partitioning modeling in regions relevant to PCDD/F formation and control. Estimates for the melting temperatures and enthalpies of sublimation and vaporization are also reported, the latter for which no experimentally determined values have been found in the literature. The use of the method to deliver reproducible, trace concentrations (ppt-ppb) of targets was applied to the calibration of the jet-REMPI/TOFMS as an online detector for low chlorinated PCDDs/Fs.     

Determination of the pKa values of titratable groups of an antigen-antibody complex, HyHEL-5-hen egg lysozyme

The titration behavior of the ionizable residues of the HyHEL-5–henegg lysozyme complex and its individual components has beenstudied using continuum electrostatic calculations. Severalresidues of HyHEL-5 had pK_a values shifted away from model valuesfor isolated residues by more than three pH units. Shifts awayfrom the model values were smaller for the residues of hen egglysozyme. A moderate variation in the pK_a values of the titratablegroups was observed upon increase of the ionic strength from0 to 100 mM, amounting to 1–2 pH units in most cases.Under physiological conditions, the net charge of HyHEL-5 wasopposite that for hen egg lysozyme. Several residues, includingthose involved in the Arg–Glu salt bridges that have beenproposed to be important in antibody-antigen binding, had pK_avalues that were changed significantly upon binding. The maintitration event upon antibody-antigen binding appears to beloss of a proton from residue GluH50 of the Fv molecule. Thelimitations of our calculation methods and the role they mightplay in the design of antibodies for use in assays, sensorsand separations are discussed     

An empirical investigation of the novice experience with soft keyboards

An experiment with 12 participants tested text entry rates on two sizes of soft keyboards with either a Qwerty layout or a layout presenting a randomized letter arrangement after each tap. The randomized layout simulated the novice experience by requiring users to visually scan the layout for each tap to find the intended letter. Rates for the Qwerty layouts were about 20 wpm with no significant difference between the large and small size. Rates for both sizes of the randomized layouts were very low, about 5.4 wpm. This is the expected walk-up text entry rate with a soft keyboard bearing an unfamiliar layout. This empirical result allows us to reject a previous model of novice interaction that used Fitts' law for stylus movement and the Hick-Hyman law for visual scan time.     

The effect of action video game experience on task-switching

There is now a substantial body of work demonstrating that action video game experience results in enhancements in a wide variety of perceptual skills. More recently, several groups have also demonstrated improvements in abilities that are more cognitive in nature, in particular, the ability to efficiently switch between tasks. In a series of four experiments, we add to this body of work, demonstrating that the action video game player advantage is not exclusively due to an ability to map manual responses onto arbitrary buttons, but rather generalizes to vocal responses, is not restricted to tasks that are perceptual in nature (e.g. respond to a physical dimension of the stimulus such as its color), but generalizes to more cognitive tasks (e.g. is a number odd or even), and is present whether the switch requires a goal-switch or only a motor switch. Finally, a training study establishes that the relationship between the reduction in switch cost and action game playing is causal.