Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.     

Evaluation of UV/H2O2 treatment for the oxidation of pharmaceuticals in wastewater

Advanced oxidation treatment using low pressure UV light coupled with hydrogen peroxide (UV/H₂O₂) was evaluated for the oxidation of six pharmaceuticals in three wastewater effluents. The removal of these six pharmaceuticals (meprobamate, carbamazepine, dilantin, atenolol, primidone and trimethoprim) varied between no observed removal and >90%. The role of the water quality (i.e., alkalinity, nitrite, and specifically effluent organic matter (EfOM)) on hydroxyl radical (OH) exposure was evaluated and used to explain the differences in pharmaceutical removal between the three wastewaters. Results indicated that the efficacy of UV/H₂O₂ treatment for the removal of pharmaceuticals from wastewater was a function of not only the concentration of EfOM but also its inherent reactivity towards OH. The removal of pharmaceuticals also correlated with reductions in ultraviolet absorbance at 254 nm (UV₂₅₄), which offers utilities a surrogate to assess pharmaceutical removal efficiency during UV/H₂O₂ treatment.     

Removal of emerging contaminants of concern by alternative adsorbents

The effective removal of emerging contaminants of concern (ECCs) such as endocrine-disrupting chemicals, pharmaceutically active compounds, personal care products, and flame retardants is a desirable water treatment goal. In this study, one activated carbon, one carbonaceous resin, and two high-silica zeolites were studied to evaluate their effectiveness for the removal of an ECC mixture from lake water. Adsorption isotherm experiments were performed with a mixture of 28 ECCs at environmentally relevant concentrations (200–900 ng/L). Among the tested adsorbents, activated carbon was the most effective, and activated carbon doses typically used for taste and odor control in drinking water (<10 mg/L) were sufficient to achieve a 2-log removal for most of the tested ECCs. The carbonaceous resin was less effective than the activated carbon because this adsorbent had a smaller volume of pores in the size range required for the adsorption of many ECCs (6–9 Å). For the removal of ECC mixture constituents, zeolites were less effective than the carbonaceous adsorbents. Because zeolites contain pores of uniform size and shape, a few of the tested ECCs with matching pore size/shape requirements were well removed, but the adsorptive removal of others was negligible, even at zeolite doses of 100 mg/L. The results of this study demonstrate that effective adsorbents for the removal of a broad spectrum of ECCs from water should exhibit heterogeneity in pore size and shape and a large pore volume in the 6–9 Å size range.     

Effect of external loads on damage detection of rubber‐toughened nanocomposites using carbon nanotubes sensory network

Multiwalled carbon nanotubes of 0.2% weight fraction are used as a sensory network for detecting and characterizing the damage of particulate epoxy composites under shear loading conditions. Three different weight fractions of carboxyl‐terminated butadiene acrylonitrile copolymer rubber [10 parts per hundred of epoxy resin (phr), 20 phr, and 30 phr] are used for toughening a thermoset epoxy composite. The electrical response of the specimens is measured, nearest the central shearing plane, using a four‐circumferential ring probe technique in conjunction with a high‐resolution data acquisition system. A collection of the electromechanical response results are reported with respect to the shear strain. The resistance changes observed under shear loading are related to nonlinear deformation mechanisms, void initiation, and growth around rubber particulate. With increasing rubber content, the strength of the material decreases and a greater drop in resistance is recorded as a result of decreased distance between neighboring carbon nanotubes (CNTs) due to declustering and straightening of molecular chains of host matrix. In the end, a comparison for 30 phr composites under shear loading with that of tensile and compression loading conditions is presented. For initial deformation, there is no change in resistance under shear loading condition; however, the significant resistance change can be noticed under both tension and compression. The specimen under shear loading conditions experiences smaller decrease in resistance when compared with both tension and compression. However, the decrease in resistance is higher for compression due to higher decrease in distance between neighboring CNTs. POLYM. COMPOS., 37:360–369, 2016. © 2014 Society of Plastics Engineers     

Participatory system dynamics modelling for housing,energy and wellbeing interactions

The built environment is a key target of decarbonization policies. However, such policies often have a narrow objective and narrow focus, resulting in ‘policy-resistance’ and unintended consequences. The literature attributes these unintended consequences to a narrow financial focus, adverse incentives, and inadequate handling of knowledge, skills, communication and feedback gaps, but it provides little advice on how these complex interactions can be captured. This paper illustrates the development and application of an integrated approach to address these complex interactions with regard to housing performance, energy, communal spaces and wellbeing. In particular, it explores the dynamics created by these relationships with simulation modelling in participatory settings, and with a diverse group of stakeholders. The simulation results suggest that monitoring is key to improve the performance of the housing stock besides energy efficiency; and investments in communal spaces positively affect the adoption of energy-efficiency measures and the wellbeing of residents. The evaluation results for participatory workshops show this approach was found useful by the stakeholders for supporting more integrated decision-making about housing. In future research, this approach can be implemented for policy problems in specific contexts.     

Solvent vapor treatment controls surface wettability in PMMA femtosecond-laser-ablated microchannels

A solvent vapor treatment was applied to femtosecond-laser-ablated microchannels in PMMA to selectively restore the original hydrophilic wetting behavior of the pristine surface. The hydrophobic surface of the microchannels from the submicron porosity induced by ablation becomes smoother and more transparent after the treatment. This simple and low-cost method, together with suitable masking, can produce wettability patterns that may be exploited to develop passive microfluidic elements such as valves and mixers.     

Temperature and pump power dependent photoluminescence characterization of MBE grown GaAsBi on GaAs

Bulk and quantum well GaAs_1?xBi_x/GaAs layers with Bi mole fractions from 0.02 to 0.10 are grown by molecular-beam epitaxy at temperatures ranging from 280 to 320?°C. The samples are characterized using temperature and pump-power dependent photoluminescence measurements covering 8–300?K and 1–250?mW (7–1,800?W/cm²), respectively. The results indicate that there is strong reduction in bandgap energy with the incorporation of small amounts of Bi and that GaAsBi most likely forms a weak type-I band alignment with GaAs.     

Discrediting in a Message Board Forum: The Effects of Social Support and Attacks on Expertise and Trustworthiness

Given the prevalence of online media today, credibility continues to be a popular subject of empirical research. However, studies examining the effects of discrediting strategies are rare. This issue is significant given the popularity of online media and the ease of such sources to spread misinformation. Therefore, the present study examines the effects of attacking the expertise and trustworthiness of a proponent of a major social issue. Results showed that support as well specific combinations of discrediting attack strategies significantly reduced message board readers' perceptions of the proponent's credibility. In addition, attacks on either the proponent's expertise or trustworthiness resulted in a reduced likelihood of readers taking action with respect to the issue.