Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.     

Chloroform Hydrodechlorination on Palladium Surfaces: A Comparative DFT Study on Pd(111), Pd(100), and Pd(211)

Topics in Catalysis - Palladium has been shown to be an effective catalyst for chloroform hydrodechlorination, which serves as a promising treatment method for industrial chloroform waste. To...     

CARD: A Contact-based Architecture for Resource Discovery in Wireless Ad Hoc Networks

Traditional protocols for routing in ad hoc networks attempt to obtain optimal or shortest paths, and in doing so may incur significant route discovery overhead. Such approaches may be appropriate for routing long-lived transfers where the initial cost of route discovery may be amortized over the life of the connection. For short-lived connections, however, such as resource discovery and small transfers, traditional shortest path approaches may be quite inefficient. In this paper we propose a novel architecture, CARD, for resource discovery in large-scale wireless ad hoc networks. Our mechanism is suitable for resource discovery as well as routing very small data transfers or transactions in which the cost of data transfer is much smaller than the cost of route discovery. Our architecture avoids expensive mechanisms such as global flooding and complex hierarchy formation and does not require any location information. In CARD resources within the vicinity of a node, up to a limited number of hops, are discovered using a proactive scheme. For resources beyond the vicinity, each node maintains a few distant nodes called contacts. Contacts help in creating a small world in the network and provide an efficient way to query for distant resources. Using contacts, the network view (or reachability) of the nodes increases, reducing the discovery overhead and increasing the success rate. On the other hand, increasing the number of contacts also increases control overhead. We study such trade-off in depth and present mechanisms for contact selection and maintenance that attempt to increase reachability with reduced overhead. Our schemes adapt gracefully to network dynamics and mobility using soft-state periodic mechanisms to validate and recover paths to contacts. Our simulation results show that CARD is scalable and can be configured to provide desirable performance for various network sizes. Comparisons with other schemes show overhead savings reaching over 93% (vs. flooding) and 80% (vs. bordercasting or zone routing) for high query rates in large-scale networks.     

The generalized Kuhn model of linear viscoelasticity

We propose a generalization of the Kuhn model of linear viscoelasticity. This generalization, which has four material parameters, is able to provide a near frequency independent response over a wide range of frequencies. It is useful for highly dissipative materials such as asphalt concrete. It is derived by generalizing Lubliner and Panoskaltsis’s modified Kuhn model, but we also show that it is closely related to fractional derivative models. We show that the model admits a rheological approximation, that is, an approximation by classical springs and dashpots. The model and rheological representation are compared to experimental data.     

A bi-criteria model for the inventory aggregation problem under risk pooling

Inventory aggregation, also called Risk Pooling, is one of the most efficient ways to reduce the level of safety stocks thereby reducing inventory across the supply chain. Determining the best level of aggregation is a difficult problem and needs extensive study of all the possible scenarios that can affect this decision. Minimizing costs in a supply chain is no longer the sole priority of businesses. Maintaining a high level of responsiveness is also considered equally important. The conflicting nature of these two criteria makes the solution of the problem difficult. In this paper, we develop a bi-criteria nonlinear stochastic integer programming model to determine the best supply chain distribution network to meet customer demands, where minimizing costs while maintaining high levels of responsiveness is important. We develop a two-stage optimization algorithm to solve this problem.     

Hydrolysis of fats and oils with moist oat caryopses

To improve the economic feasibility of hydrolyzing fats and oils with moist oat caryopses, various factors affecting the efficiency of the process were studied. Caryopses produced with an impact-type dehuller exhibited greater lipase activity than those produced by a wringer-type dehuller. Abrasion of oat caryopses against each other in a fluidized bed released particles rich in lipase. Such lipase concentrates could be added to moist caryopsis reactors to speed fat hydrolysis. Beef tallow, lard, soybean oil and crambe oil were hydrolyzed more efficiently than corn oil, castor oil and milk fat. The poor hydrolysis of castor oil was attributed to the formation of esters with the hydroxy group of ricinoleic acid, and the hydrolysis of castor oil was increased by dilution of the substrate with hexane. Diglycerides inhibited the hydrolysis and accounted for the slower hydrolysis of corn oil. Hydrolysis of milk fat by moist oat caryopses resulted in preferential hydrolysis of C₆ to C₁₀ acids. Erucic acid was released from crambe oil at significantly slower rates than the other acyl groups. High conversions of fats and oils to free fatty acids could be attained by (i) exposing the fats and oils to two to three lots of moist caryopses, (ii) the use of special oat varieties with elevated lipase content, (iii) the addition of oat lipase concentrates to moist caryopsis reactors, and (iv) dilution of the substrate with hexane. Estimates of the cost of producing free fatty acids with these processes indicated that the first three should be profitable. Growth ofClostridium sporogenes spores could not be demonstrated in caryopsis reactors. During the incubation of moist oat caryopses immersed in oil, the free fatty acid content of the internal caryopsis lipid increased only slightly, but there were changes in its fatty acid composition.     

The importance of axial misalignment on the long term strength of polyethylene pipe butt fusion joints

The importance of axial misalignment at polyethylene pipe butt fusion joints has been assessed by undertaking elevated temperature lifetime tests. Both medium and high density polyethylene pipes were fusion joined to give aligned and controlled misaligned butt joints. These were tested under either a constant or fluctuating internal pressure loading using conditions that induced failure by slow, stable crck growth. It was observed that the lifetime of a butt joined system depends upon both the internal pressure or pressure range applied and the level of misalignment at the butt fusion joint. Increasing either the internal pressure (range) or the misalignment reduced system performance. These two variables of misalignment and internal pressure (range) may be incorporated into a single parameter, the amplified axial stress (or stress range) at the butt joint. This amplified or butt joint axial stress (or stress range) may be derived by considering the additional bending stresses introduced at the butt joint by virtue of misalignment combined with the axial stress loading.     

Structural drivers controlling sulfur solubility in alkali aluminoborosilicate glasses

If the direct feed approach to vitrify the Hanford's tank waste is implemented, the low activity waste (LAW) will comprise higher concentrations of alkali/alkaline-earth sulfates than expected under the previously proposed vitrification scheme. To ensure a minimal impact of higher sulfate concentrations on the downstream operations and overall cost of vitrification, advanced glass formulations with enhanced sulfate loadings (solubility) are needed. While, the current sulfate solubility predictive models have been successful in designing LAW glasses with sulfate loadings <2 wt.%, it will be difficult for them to design glass compositions with enhanced loadings due to our limited understanding of the fundamental science governing these processes. In this pursuit, this article unearths the underlying compositional and structural drivers controlling the sulfate solubility in model LAW glasses. It has been shown that the preferentially removes non-framework cations from the modifier sites in the silicate network, thus, leading to the polymerization in the glass network via the formation of ring-structured borosilicate units. Furthermore, though the sulfate solubility slightly decreases with increasing Li⁺/Na⁺ in the glasses, the prefers to be charge compensated by Na⁺, as it is easier for to break Na–O bonds instead of Li–O bonds.     

Template-based program verification and program synthesis

Program verification is the task of automatically generating proofs for a program’s compliance with a given specification. Program synthesis is the task of automatically generating a program that meets a given specification. Both program verification and program synthesis can be viewed as search problems, for proofs and programs, respectively. For these search problems, we present approaches based on user-provided insights in the form of templates. Templates are hints about the syntactic forms of the invariants and programs, and help guide the search for solutions. We show how to reduce the template-based search problem to satisfiability solving, which permits the use of off-the-shelf solvers to efficiently explore the search space. Template-based approaches have allowed us to verify and synthesize programs outside the abilities of previous verifiers and synthesizers. Our approach can verify and synthesize difficult algorithmic textbook programs (e.g., sorting and dynamic programming-based algorithms) and difficult arithmetic programs.