Towards finding the best-fit distribution for OSN data

The Journal of Supercomputing - Currently, all online social networks (OSNs) are considered to follow a power-law distribution. In this paper, the degree distribution for multiple OSNs has been...     

Colloidal processing of polymer ceramic nanocomposite integral capacitors

Polymer ceramic composites form a suitable material system for low temperature fabrication of embedded capacitors appropriate for the MCM-L technology. Improved electrical properties such as permittivity can be achieved by efficient filling of polymers with high dielectric constant ceramic powders such as lead magnesium niobate-lead titanate (PMN-PT) and barium titanate (BT). Photodefinable epoxies as the matrix polymer allow fine feature definition of the capacitor elements by conventional lithography techniques. The optimum weight percent of dispersant is tuned by monitoring the viscosity of the suspension. The dispersion mechanism (steric and electrostatic contribution) in a slightly polar solvent such as propylene glycol methyl ether acetate (PGMEA) is investigated from electrophoretic measurements. A high positive zeta potential is observed in the suspension, which suggests a strong contribution of electrostatic stabilization. By optimizing the particle packing using a bimodal distribution and modified processing methodology, a dielectric constant greater than 135 was achieved in PMN-PT/epoxy system. Suspensions are made with the lowest PGMEA content to ensure the efficiency of the dispersion and efficient particle packing in the dried film. Improved colloidal processing of nanoparticle-filled epoxy is a promising method to obtain ultra-thin capacitor films (<2/spl mu/m) with high capacitance density and improved yield. Capacitance of 35 nF/cm/sup 2/ was achieved with the thinnest films (2.5-3.0 /spl mu/m).     

High-gain pseudomorphic InGaAs base ballistic hot-electron device

A high-gain ballistic hot-electron device is described. The GaAs-AlGaAs heterostructure device, with a 21-mm-thick pseudomorphic In _0.12Ga_0.88As base, had a current gain of 27 at 77 K and 41 at 4.2 K. As characteristically seen in ballistic devices, transfer into the L valley limited the maximum gain. The Γ-L valley separation in the strained In_0.12Ga_0.88As was estimated to be about 380 meV     

Finite-difference time-domain analysis and experimental examinationof the performance of a coupled-cavity MQW laser/active waveguide at1.54 μm

The performance characteristics of a coupled cavity InGaAsP-InP MQW laser/active waveguide made by one-step epitaxy and well-controlled reactive ion etching (RIE) have been theoretically analyzed and experimentally determined. A theoretical model based on a finite-difference time-domain (FDTD) technique was used to simulate the propagation of an optical wave launched in the coupled system and determine the reflectivity of the facets created by RIE. The calculated effective reflectivity of the coupling region consisting of two facets and an air gap is between 0.45 and 0.55, which is in good agreement with the experimentally measured value of 0.5. The reflectivity of a single etched mirror derived from this value is estimated to be 0.3. A 120-μm-long monolithically integrated active waveguide when biased as a modulator and excited by the laser shows a maximum extinction ratio of 8 dB and a modulation bandwidth ⩾14 GHz at a dc bias of -0.5 V with a bias swing of 2 V     

IsK and KvLQT1: mutation in either of the two subunits of the slow component of the delayed rectifier potassium channel can cause Jervell and Lange-Nielsen syndrome

The Jervell and Lange-Nielsen syndrome (JLNS) comprises profound congenital sensorineural deafness associated with syncopal episodes. These are caused by ventricular arrhythmias secondary to abnormal repolarisation, manifested by a prolonged QT interval on the electrocardiogram. Recently, in families with JLNS, Neyroud et al. reported homozygosity for a single mutation in KVLQT1 , a gene which has previously been shown to be mutated in families with dominantly inherited isolated long QT syndrome [Neyroud et al . (1997) Nature Genet ., 15, 186-189]. We have analysed a group of families with JLNS and shown that the majority are consistent with mutation at this locus: five families of differing ethnic backgrounds were homozygous by descent for markers close to the KVLQT1 gene and a further three families from the same geographical region were shown to be homozygous for a common haplotype and to have the same homozygous mutation of the KVLQT1 gene. However, analysis of a single small consanguineous family excluded linkage to the KVLQT1 gene, establishing genetic heterogeneity in JLNS. The affected children in this family were homozygous by descent for markers on chromosome 21, in a region containing the gene IsK . This codes for a transmembrane protein known to associate with KVLQT1 to form the slow component of the delayed rectifier potassium channel. Sequencing of the affected boys showed a homozygous mutation, demonstrating that mutation in the IsK gene may be a rare cause of JLNS and that an indistinguishable phenotype can arise from mutations in either of the two interacting molecules.     

Digital Connectivity and Extended Well-Composed Sets for Gray Images

In this paper, we propose a new definition of digital connectivity for gray images on a 2D space for arbitrary grid systems. We extend a digital version of the Jordan curve theorem and its converse proved earlier by Rosenfeld for the rectangular grid system. We also extend in two directions the concept of well-composed sets introduced by Lateckiet al.(1995,Comput. Vision Image Understanding61,70–83). First, we extend the definition of well-composed sets from the quadratic grid system to an arbitrary grid system. Then, by using the concept of parameter-dependent connected components introduced by us in a previous work, we allow the pixels in a connected component of a well-composed set to have different gray values so that the connectivity of connected components accommodates a wider meaning.     

Rotation at the crack tip under uniform heat flow in an infinite medium

A complex analysis of rigid body rotation is presented. The crack-tip rotation for a line crack subjected to steady uniform heat flow is obtained in terms of thermal stress intensity factor in shear mode of the crack, the material and thermal parameters and coordinates of points close to the crack tip. The shear strip configuration is analysed on the basis of rotation and displacement at the end of the shear strip.     

Screen‐printed biosensor for allergens

Allergen levels in indoor environments, leading to many diseases, eg asthma, rhinitis and conjunctivitis, affect a large and increasing fraction of the population. A quite effective and inexpensive method of a rough but very rapid overall assessment of total allergen level in the environment has been developed. The method involved estimation of protein in allergen extracts by screen‐printed electrodes using two different techniques. The biosensor comprised a rhodinised carbon working electrode, a silver/silver chloride reference electrode and a carbon counter electrode. In the first method the enzyme protease reacted with allergen protein to release amino acid, which produced hydrogen peroxide in the presence of amino acid oxidase. This was detected amperometrically. The second method used potassium bromide as electrolyte and the electrode was subjected to dual potential. Bromine, released due to electrolysis at higher potential, was consumed by the allergen protein at lower potential. In the first method, a unique technique was used to microencapsulate the enzyme protease and immobilise it on the surface of the electrode by in‐situ polymerisation to avoid contact with the amino acid oxidase. A total of seven allergens were tested and the results gave a good correlation with the standard protein measurement method. Environmental specimens from indoors, schools and workplaces can be evaluated for the aeroallergens produced by dust mites, animal hairs, cockroach debris, pollens, etc as a means of determining the exposure risk. Copyright © 2005 Society of Chemical Industry