Three and one-dimensional hierarchical α-Fe2O3 nanostructures for photoelectrochemical water oxidation

Journal of Materials Science: Materials in Electronics - Herein, we report the synthesis of three-dimensional (3D) and one-dimensional (1D) hierarchical hematite (α-Fe2O3) nanostructures on...     

Effect of ‘Zn’ substitution on structural,morphological, magnetic and optical properties of Co–Zn ferrite nanoparticles for ferrofluid application

Journal of Materials Science: Materials in Electronics - The Co1?xZnxFe2O4 (Co–Zn) ferrite nanoparticles with x varying from 0.0 to 0.4 have been manufactured by facile chemical...     

An Adaptive Transmission Mode Selection Scheme for Cellular Underlaid D2D Communication

In this paper, we propose to use Artificial Bee Colony (ABC) optimization to solve the joint mode selection, channel assignment, and power allocation (JMSCPA) problem to maximize system throughput and spectral efficiency. JMSCPA is a problem where the allocation of channel and power depends on the mode selection. Such problems require two step solution and are called bi-level optimization problems. As bi-level optimization increases the complexity and computational time, we propose a modified version of single-level ABC algorithm aided with the adaptive transmission mode selection algorithm to allocate the cellular, reuse, and dedicated modes to the DUs along with channel and power allocation based on the network traffic load scenarios. A single variable, represented by the users (CUs and DUs) is used to allocate mode selection, and channel allocation to solve the JMSCPA problem, leading to a simpler solution with faster convergence, and significant reduction in the computational complexity which scales linearly with the number of users. Further, the proposed solution avoids premature stagnation of conventional ABC into local minima by incorporating a modification in its update procedure. The efficacy of the ABC-aided approach, as compared to the results reported in the literature, is validated by extensive numerical investigations under different simulation scenarios.

     

Bandwidth Improvement of Stub Loaded Compact Ultra-Wideband Microstrip Patch Antenna for C/X-Band Applications

Wireless Personal Communications - Authentication is a term very important for data communication security. We see many frauds due to authentication failure. The problem manifolds when...     

Oceanic-Atmospheric Variability Influences on Baseflows in the Continental United States

Water Resources Management - Baseflows are one of the important components of streamflows and the influences of climate change and variability on changes in baseflows in space and time can aid in...     

Sintering behaviour of fluorapatite–silicate composites produced from natural fluorapatite and quartz

In this work, the sintering behaviour of fluorapatite (FAp)–silicate composites prepared by mixing variable amounts of natural quartz (2.5 wt% to 20 wt%) and FAp was studied. The composites were pressureless sintered in air at temperatures from 1000 °C to 1350 °C. The effects of temperatures on the densification, phase formation, chemical bonding and Vickers hardness of the composites were evaluated. All the samples exhibited mixed phase, comprising FAp and francolite as the major constituents along with some minor phases of cristobalite, wollastonite, dicalcium silicate and/or whitlockite dependent on the quartz content and sintering temperature. The composite containing 2.5 wt% quartz exhibited the best sintering properties. The highest bulk density of 3 g/cm³ and a Vickers hardness of >4.2 GPa were obtained for the 2.5 wt% quartz–FAp composite when sintered at 1100 °C. The addition of quartz was found to alter the microstructure of the composites, where it exhibited a rod-like morphology when sintered at 1000 °C and a regular rounded grain structure when sintered at 1350 °C. A wetted grain surface was observed for composites containing high quartz content and was believed to be associated with a transient liquid phase sintering.     

Role of SiC on Mechanical,Tribological and Thermal Expansion Characteristics of B4C/Talc-Reinforced Al-6061 Hybrid Composite

Silicon - A hybrid SiC/B4C/Talc reinforced Al-6061 metal matrix composite with improved machinability, wear resistance and low thermal expansion is prepared and evaluated. The primary aim of this...     

Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications

In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment process has been investigated. The animal bones were locally sourced, cleaned to remove collagen and subsequently heat treated in air atmosphere at different temperatures ranging from 600?°C to 1000?°C. From the range of sintering temperatures investigated, it was found that hydroxyapatite derived from bovine bone showed good thermal stability while those produced from caprine and galline bones exhibited phase instability with traces of tri-calcium phosphate (TCP) being detected after heat treatment beyond 700?°C. The porous nature of the bone samples can be observed from the microstructures obtained and supported by low relative density. Heating the bovine and caprine bones at selected temperatures yielded porous HA body, having hardness values that are comparable with human cortical bone. However, the sintered galline bone sample showed higher porosity levels and low hardness when compared to the other two bone types.     

Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics

The effect of various amounts of copper oxide (CuO) up to 1?wt% on the densification behaviour and mechanical properties of 3?mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering method. The MW sintering was performed at temperatures between 1100?°C and 1400?°C, with a heating rate of 30?°C/min. and holding time of 5?min. The beneficial effect of MW in enhancing densification was also compared for the undoped and 0.2?wt% CuO-doped Y-TZP when subjected to conventional sintering (CS) method. The results showed that significant enhancement in the relative density and Vickers hardness were observed for the undoped Y-TZP when MW-sintered between 1100?°C and 1250?°C. It was revealed that the 0.2?wt% CuO-doped Y-TZP and MW sintered at 1250–1300?°C could attain ≥?99.8% of theoretical density, Vickers hardness of about 14.4?GPa, fracture toughness of 7.8 MPam^1/2 and exhibited fine equiaxed tetragonal grain size of below 0.25?µm. In contrast, the addition of 1?wt% CuO was detrimental and the samples exhibited about 50% monoclinic phase upon sintering coupled with poor bulk density and mechanical properties. The study also revealed that the addition of 0.2?wt% CuO and subjected to conventional sintering produced similar densification as that obtained for microwave sintering, thus indicating that the dopant played a more significant role than the sintering method.