External Synchronization of 160-GHz Optical Beat Signal by Optical Phase-Locked Loop Technique

We have synchronized a 160-GHz optical beat signal with a 40-GHz reference optical pulse train by using an optical phase-locked loop (OPLL). The OPLL consists of an optical beat signal source, comprising a pair of three-electrode distributed feedback laser diodes that works as a voltage controlled oscillator, and an all-optical phase detector based on the two-photon absorption in a silicon avalanche photodiode. Phase-locking operation is confirmed through phase-error measurement and cross-correlation trace measurement. The residual timing jitter of the 160-GHz optical beat signal relative to the reference pulse train, in the bandwidth of 80 MHz, is measured to be as small as 126 fs     

Automated camerawork for capturing desktop presentations

A novel automated camera control method for capturing desktop presentations is introduced. Typical features and the camerawork of shots that appear frequently in TV programs are discussed. To realise those features in this automated video capturing system, the purpose of camerawork is classified from two points of view: target and aspect-of-target. Then, the correspondence between the classification and typical shots and camerawork is considered. A virtual-frame control algorithm based on this idea is proposed, and its implementation in a video production system. Results are shown that verify this method through two kinds of experiments, virtual video capturing using CG animations and real video capturing of real presentations.     

20 Gbit/s soliton transmission using alternating dispersionarrangement in standard fibre systems

An alternating dispersion arrangement is proposed for soliton systems with dispersion compensation to improve soliton stabilisation. A transmission experiment at 20 Gbit/s over 2600 km long singlemode fibre was successfully demonstrated by employing this novel dispersion arrangement     

Osteoclastic features of multinucleated giant cells responding to synthetic hydroxyapatite implanted in rat jaw bone.

Multinucleated giant cells (MGCs) that responded to synthetic hydroxyapatite (HAP) implanted in rat mandibles were studied with electron microscopy. HAP used in this study sintered at 200 degrees C (HAP200) and at 125 degrees C (HAP1250) after the synthesis by a wet method. One to three weeks after the intraosseous implantation of HAP, MGCs responding to HAP200 had not only well-developed ruffled border and the clear zone but well-developed perinuclear Golgi complex, many mitochondria and vesicles in their cytoplasms. MGCs responding to HAP1250 had the clear zone, but not the ruffled border although they showed similar cytoplasmic features to those of MGCs responding to HAP200. They merely extended short slender cytoplasmic processes to HAP1250. These results suggest that although osteoclast-like MGCs respond to HAP implanted in the bone, the development of the ruffled border-clear zone system depends on physicochemical properties of HAP.     

Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water

We studied the rates of gelation and phase separation of poly(vinyl alcohol) (PVA) solutions in mixtures of dimethyl sulfoxide (DMSO) and water at 25 °C and found that both the rates show a maximum at a volume fraction of DMSO φ_DMSO=0.60 while gelation was not observed either in pure DMSO or pure water, suggesting that water-DMSO is a cononsolvent system for PVA. On the basis of the data by Cowie [Can J Chem 36 (1961) 2240] we concluded that the 1:2 stable complex between one DMSO molecule and two water molecules is the main cause of this cononsolvency.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Dynamics of learning near singularities in layered networks

We explicitly analyze the trajectories of learning near singularities in hierarchical networks, such as multilayer perceptrons and radial basis function networks, which include permutation symmetry of hidden nodes, and show their general properties. Such symmetry induces singularities in their parameter space, where the Fisher information matrix degenerates and odd learning behaviors, especially the existence of plateaus in gradient descent learning, arise due to the geometric structure of singularity. We plot dynamic vector fields to demonstrate the universal trajectories of learning near singularities. The singularity induces two types of plateaus, the on-singularity plateau and the near-singularity plateau, depending on the stability of the singularity and the initial parameters of learning. The results presented in this letter are universally applicable to a wide class of hierarchical models. Detailed stability analysis of the dynamics of learning in radial basis function networks and multilayer perceptrons will be presented in separate work.     

Intercalation of n-alkylamines into α-tin(IV) bis(hydrogenphosphate)

The intercalation reaction of n-alkylamines from methyl- to hexadecylamine into -tin(IV) bis(hydrogenphosphate) has been investigated. The reaction was conducted by mixing the phosphate and solutions of the amines dissolved in water or benzene. The amine/ phosphate molar ratios in the reaction mixtures were 0.43, 0.85, 1.71 and 3.41. The nitrogen/phosphorus atomic ratio in the intercalation compound was not changed by the amine/phosphate molar ratio. The interlayer distances of the intercalates obtained in the reaction mixtures with molar ratios of 3.41 and 1.71 increased with an increase in the number of carbon atoms in the alkyl chain of the amine. The slope of the straight line obtained in plot of interlayer distance versus number of carbon atoms in the alkyl chain of the amine indicates that the amine molecules form a double layer in the interlayer space of the phosphate and are inclined at an approximate angle of 67.7° to the phosphate layer. The interlayer distances of the intercalates of butyl- to nonylamines obtained at the molar ratio of 0.85 are smaller than those of the corresponding compounds from the molar ratios of 3.41 and 1.71, while those of decyl- to hexadecylamine intercalates lie on the previously discussed line. This behaviour is interpreted by assuming kink formation in the short alkyl chains between the phosphate layers.     

Design of moving magnet type pickup actuator using inserted coil

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young’s modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.