Thermo economic evaluation of oxy fuel combustion cycle in Kazeroon power plant considering enhanced oil recovery revenues简

Oxy fuel combustion and conventional cycle （currently working cycle） in Kazeroon plant are modeled using commercial thermodynamic modeling software. Economic evaluation of the two models regarding the resources of transport and injection of carbon dioxide into oil fields at Gachsaran for enhanced oil recovery in the various oil price indices is conducted and indices net present value （NPV） and internal rate of return on investment （IRR） are calculated. The results of the two models reveal that gross efficiency of the oxy fuel cycle is more than reference cycle （62% compared to 49.03%）, but the net efficiency is less （41.85% compared to 47.92%） because of the high-energy consumption of the components, particularly air separation unit （ASU） in the oxy fuel cycle. In this model, pure carbon dioxide with pressure of 20~ 105 Pa and purity of 96.84% was captured. NOx emissions also decrease by 4289.7 tons per year due to separation of nitrogen in ASU. In this model, none of the components of oxy fuel cycle is a major engineering challenge. With increasing oil price, economic justification of oxy fuel combustion model increases. With the price of oil at $ 80 per barrel in mind and $ 31 per ton fines for emissions of carbon dioxide in the atmosphere, IRR is the same for both models.     

Geometric Patterns,Light and Shade: Quantifying Aperture Ratio and Pattern Resolution in the Performance of Shading Screens

This research focuses on the application and performance assessment of geometric patterns as shading screens and shows how the geometric patterns can function as a design agency, an environmental control system, and a cultural element. We begin with a brief review of the underlying rules of creating two-dimensional geometric patterns, and then look at how these patterns evolve as three-dimensional shading screens in buildings. We next discuss a predictive model for translating complex patterns to simple patterns concerning their perforation ratio, granularity, and morphology. This is followed by an experimental and simulation study for measuring the daylighting performance of some simple shading screens. The result of this phase assesses the agreement among experimental and numerical studies. Finally, we evaluate the performance of a screen inspired by a Persian pattern.     

Resistive switching memory using biomaterials

Resistive switching memory (ReRAM) is emerging as a developed technology for a new generation of non-volatile memory devices. Natural organic biomaterials are potential elements of environmentally-benign, biocompatible, and biodegradable electronic devices for information storage and resorbable medical implants. Here, we highlight progress in exploiting biomaterials to fabricate a special category of bio-nanoelectronic memories called biodegradable resistive random access memory (bio-ReRAM). Bio-ReRAMs are beneficial because they are non-toxic and environmentally benign. Various types of biomaterials with their chemical compound, bio-ReRAM device design and structure, their relevance resistive switching (RS) behavior, and conduction mechanism are considered in detail. Particularly, we report physically-transient devices, their corresponding switching mechanism, and their dissolution by immersion in water. Finally, we review recent progress in the development of various types of flexible bio-ReRAMs, focusing on their flexibility and reliability as bendable nanoelectronics. Because most of these devices are candidates to become wearable, skin-compatible, and even digestible smart electronics, we discuss the future improvement of natural materials and the perspective of novel bio-ReRAMs.     

Study of the anticorrosive properties of polypyrrole/polyaniline bilayer via electrochemical techniques

In this work, using electrochemical techniques the authors investigated the protective properties of a polypyrrole/polyaniline bilayer as a conductive polymer. A polypyrrole/polyaniline bilayer was deposited on carbon steel substrate by potentiostatic method. The electric capacitance and resistance of the films were monitored with the immersion time in a corrosive solution to investigate the water permeability of the films. Polypyrrole/polyaniline bilayer has a relatively low permeability and good catalytic behavior in passivation of carbon steel in longer periods. The results show that the bilayer has a better anticorrosive behavior compared to homopolymers (polypyrrole and polyaniline).     

The effect of ZIF-90 particle in Pebax/Psf composite membrane on the transport properties of CO2, CH4 and N2 gases by Molecular Dynamics Simulation method

Nowadays, mixed matrix membranes (MMMs) have considered by many researchers to overcome the problems of polymeric membranes. In addition, molecular dynamics (MD) and Monte Carlo (MC) simulation Methods are suitable tools for studying transport properties and morphology in MMMs. For this purpose, in this study using material studio 2017 (MS) software, the transport properties of CO₂, CH₄ and N₂ in Pebax, Psf neat Pebax/Psf composite and Pebax/Psf composite filled with ZIF-90 particles have been investigated. By adding Psf to Pebax matrix, the selectivity of CO₂/CH₄ and CO₂/N₂ gases has significantly increased. In addition, adding ZIF-90 particles to the Pebax/Psf composite increased the permeability of CO₂, CH₄ and N₂ compared to neat and composite membranes. The morphological properties of the membranes, such as the fractional free volume (FFV), radial distribution function (RDF), glass transition temperature (T_G), X-ray diffraction (XRD) and equilibrium density have calculated and acceptable results have obtained.     

Superpixel-based brain tumor segmentation in MR images using an extended local fuzzy active contour model

Multimedia Tools and Applications - In this paper, to deal with poor boundaries in the presence of noise and heterogeneity of magnetic resonance (MR) images, a new region-based fuzzy active contour...     

Hot melt mixing and foaming of soluplus® and indomethacin

The hot melt mixing (HMM) process was used to dissolve 30 wt% of a model drug, indomethacin (INM), in Soluplus® a water soluble polymer excipient. Comprehensive characterization of the HMM‐prepared samples, using differential scanning calorimetry, X‐ray diffraction, Fourier Transform Infrared spectroscopy, and optical microscopy, strongly suggests that INM was in amorphous state, forming a solid solution with the polymer. Furthermore, to understand the impact of foaming on INM's release profile, the HMM product was foamed in a batch process using supercritical carbon dioxide (CO₂). Dissolution tests of HMM and reference samples were conducted in aqueous solutions with pH 7.4 and 1.2. In all cases INM's release showed strong pH‐dependency; faster release and a greater amount of INM was released at pH 7.4 than at pH 1.2. For pure INM and the physical mixture, the drug's ionizable character results in the observed pH‐dependency. While for the HMM samples it is also a consequence of theformation of hydrogen bonds between Soluplus® and INM which hinder polymer dissolution at pH 1.2. It was observed that the release rate of INM from different sample types at pH 7.4 decreased in the following sequence: foamed HMM > unfoamed HMM > crystalline INM > physical mixture. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Investigating the possibility of Sonofusion in Deuterated acetone

In this article, energetic implosion of a single vapor bubble induced by a standing acoustic wave is theoretically studied and the Sonoluminescing bubble parameters involved in Sonofusion in Deuterated acetone (C₃D₆O) are investigated. Parameters such as radius, wall velocity, interior temperature and pressure of the bubble influenced by various driving pressure amplitudes in Deuterated acetone at ∼0 °C are investigated. Based on the obtained results, the possibility of thermonuclear fusion inside imploding cavitation bubbles is discussed. The interior pressure of C₃D₆O vapor bubbles at the collapse time is extremely high and the increase of the pressure amplitude increases the pressure inside the bubble. Our findings reveal that the maximum temperature inside acoustic-induced cavitation bubble in Deuterated acetone increases with the acoustic pressure amplitude and it is much higher than the maximum temperature inside acoustic induced cavitation bubbles in liquids such as water and acids. Consequently, the calculated temperature at the pressure amplitude of 7.23 bar was about 3.7 × 10⁵ K and it is predicted that at the reported experimental condition, the case of a bubble cluster subjected to the pressure amplitude of about 15 bar, the temperature inside the bubble reaches to 1.2 × 10⁶ K.