Sustaining Reforms in Water Service Delivery: the Role of Service Quality,Salience, Trust and Financial Viability

Water Resources Management - The long-term success of water service reforms depends on sufficient revenues being collected from users to allow access to be extended and quality of service to be...     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Investigation on material mixing during FSW of AA7475 to AISI304

AA7xxx and AISI304 stainless steel (SS) are employed in promising applications. Al alloy-to-SS dissimilar joining is difficult and challenging. Major challenge in the joining of these alloys is the difficulty in mixing of these materials which possess exotic and widely distant properties. AA7475-T761 is a high strength aluminum alloy which is used in key aircraft components. Maiden AA7475-T761 and AISI304 dissimilar joints were fabricated using friction stir welding. Welding was performed with tool having pin diameter of 4 mm and offset of 1.25 mm on Aluminum side. Tool rotational speed, traverse speed and shoulder diameter were varied in the range of 450–560 rpm, 50–63 mm/min, and 12–14 mm, respectively. Mechanical tests showed that joint formed with 14 mm diameter, 560 rpm and 50 mm/min gave the best joint efficiency of 71% of Al-alloy at 7.31% elongation. The materials mixing issues during processing were analyzed with SEM mircrostructure and fractography. Metallography also revealed that offset is critical to the success of joint as it controlled effective mixing of SS and Al in 15 and 85 vol.%, respectively. SS fragments from thermo-mechanically affected zone of SS were found to be partially sheared forming layer of thickness equal to tool traverse/revolution ratio.     

Minimization of organic chemical load in direct dyes effluent using low cost adsorbents

The work is carried out to minimize the organic chemical load (unexhausted dye contents) in direct dyes effluent using low cost adsorbents. The studies are made with different direct dyes, i.e. Direct Red 28, Direct Yellow 12, Direct Orange 26 and Direct Blue 1 with various adsorbents. Three different bio/natural materials have been selected as adsorbents. These includes, Sugarcane bagasse pith (SB), Saw dust (SD)—the plant origin products, and Brick powder (BP)—a silica based material obtained from earth's crust on thermal heating. These substances are almost discarded waste products with the possibility of use as adsorbents. Experimental work for the dye removal from the effluent by activated charcoal (AC) has also been carried out and the results are compared with other adsorbents. The amount of unexhausted organic dye present in the effluent is measured as chemical oxygen demand (COD) before and after the treatment. Adsorbent Sugarcane bagasse pith shows good performance as compared to Saw dust and Brick powder. For understanding the behaviour of adsorbents Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) has also been carried out.     

Nanocrystalline electroless nickel poly-alloy deposition: incorporation of W and Mo

Autocatalytic quaternary Ni–W–Mo–P films were prepared using alkaline citrate based baths and compared with binary Ni–P and ternary Ni–W–P, Ni–Mo–P coatings. Energy dispersive X-ray analysis showed that the binary Ni–P deposit contained 12·2 wt-%P. Codeposition of tungsten in Ni–P matrix resulted in ternary Ni–W–P with 4·1 wt-%P and 5·2 wt-%W. Incorporation of molybdenum led to a ternary Ni–Mo–P deposit containing 4·1 wt-%Mo and 11·2 wt-%P. Presence of both sodium tungstate and sodium molybdate in the basic bath resulted in a quaternary coating with 3·6 wt-%W, 6·7 wt-%Mo and 2·5 wt-%P. X-ray diffraction patterns of all the deposits revealed a single peak for Ni (1 1 1). The quaternary alloy exhibited a sharper peak showing the more crystalline nature of the deposit. Field emission scanning electron microscopy studies of the deposits showed the presence of smooth nodules for ternary deposits, but coarse and well defined nodules for quaternary deposits. Phase transformation behaviour of the ternary Ni–W–P deposit revealed a single exothermic peak at 440°C. However, ternary Ni–Mo–P deposit exhibited a split type high temperature peak at 397 and 461°C and the quaternary Ni–W–Mo–P deposit showed a single high temperature peak at 485°C. Microhardness measurements showed that the quaternary Ni–W–Mo–P deposit exhibited increased hardness of 920 HV(50 gf) when heat treated for 1 h at 400°C.     

Phenotypic identification and technological properties of lactic acid bacteria isolated from traditionally processed fish products of the Eastern Himalayas

Sukako maacha, gnuchi, sidra and sukuti are traditional smoked and sun-dried fish products of the Eastern Himalayan regions of Nepal and India. A total of 40 samples of sukako maacha (14), gnuchi (6), sidra (10) and sukuti (10) were collected and were analysed for microbial load. Population of lactic acid bacteria (LAB) as well as aerobic mesophilic counts ranged from 4.7-8.3 to 5.1-8.5 log cfu g(-1), respectively. A total of 189 strains of LAB were isolated from sukako maacha, gnuchi, sidra and sukuti samples, out of which 171 strains were cocci and 15 strains, were heterofermentative lactobacilli. LAB were identified on the basis of phenotypic characters including API system as Lactococcus lactis subsp. cremoris, Lactococcus lactis subsp. lactis, Lactococcus plantarum, Leuconostoc mesenteroides, Enterococcus faecium, Enterococcus faecalis, Pediococcus pentosaceus and Weissella confusa. LAB strains produced a wide spectrum of enzymes. Some strains of LAB showed antagonistic properties against pathogenic strains. None of the strains produced biogenic amines in the method applied. This paper is the first report on the microbial composition, mostly lactic acid bacteria, of traditionally processed fish products of Eastern Himalayas.     

Identification of yeast strains isolated from marcha in Sikkim, a microbial starter for amylolytic fermentation

Marcha or murcha is a traditional amylolytic starter used to produce sweet-sour alcoholic drinks, commonly called jaanr in the Himalayan regions of India, Nepal, Bhutan, and Tibet (China). The aim of this study was to examine the microflora of marcha collected from Sikkim in India, focusing on yeast flora and their roles. Twenty yeast strains were isolated from six samples of marcha and identified by genetic and phenotypic methods. They were first classified into four groups (Group I, II, III, and IV) based on physiological features using an API test. Phylogenetic, morphological, and physiological characterization identified the isolates as Saccharomyces bayanus (Group I); Candida glabrata (Group II); Pichia anomala (Group III); and Saccharomycopsis fibuligera, Saccharomycopsis capsularis, and Pichia burtonii (Group IV). Among them, the Group I, II, and III strains produced ethanol. The isolates of Group IV had high amylolytic activity. Because all marcha samples tested contained both starch degraders and ethanol producers, it was hypothesized that all four groups of yeast (Group I, II, III, and IV) contribute to starch-based alcohol fermentation.     

Electronic and vibrational excitations in layered highT c superconductors

In the series of the layered highT _c superconductors (A)_1,2 B₂Ca _n−1Cu _n O_2n+3,4 (A=Tl or Bi;B=Ba or Sr), withn=number of consecutive Cu-O layers, the electron energy states of some of the Tl-based systems have been investigated. The electron and phonon dispersion curves have been obtained. The electronic states near the Fermi level are dominated by the hybridized Cu(d) and the O(p) orbitals. The dispersion curves are highly two-dimensional with very small dispersion alongc-axis. The number of bands is enhanced with increase in the number of the consecutive Cu-O planes (n). The present results agree with those obtained earlier for other superconducting phases. The phonons are overall dominated by the vibrations of the light mass oxygen atom modes both lying in or outside the Cu-O planes. The low-frequency phonons involve the motions of the heavier Tl, Ba atoms etc.