Antimicrobial and antifungal agents derived from clay minerals

A silver chelate of 2-(4-thiazolyl)-benzimidazole, dodecyltrimethylammonium cation and hexadecylpyridinium cation have been intercalated between montmorillonite, and the resulting samples were subjected to examination of their thermostabilities by thermogravimetry and carbon dioxide evolution analysis up to 500 °C in air. The degradation behaviour of the intercalant was significantly changed by intercalating between the montmorillonite layers. Two quaternary ammonium cations were released from the montmorillonite both at the same temperature, which was higher than those for the quaternary ammonium cations themselves. This relation was also observed in the case of 2-(4-thiazolyl)-benzimidazole. The improvement of the thermostability after intercalation can be attributed to the bonding between the intercalant and the host montmorillonite layers.     

Is it possible to differentiate between choledochal cyst and congenital biliary atresia (type I cyst) by antenatal ultrasonography?

Both choledochal cyst and congenital biliary atresia (type I cyst) may share the same ultrasonographic pattern. We report 2 cases which were shown to have cystic structures on the upper abdomen by antenatal ultrasonography. The size of the choledochal cyst found at 24 weeks' gestation increased steadily as gestational age advanced. But the size of the cyst in congenital biliary atresia found at 29 weeks' gestation remained unchanged throughout the remaining pregnancy. Cyst enlargement, therefore, may suggest the possibility of a choledochal cyst.     

Protein modification by a Maillard reaction intermediate methylglyoxal. Immunochemical detection of fluorescent 5-methylimidazolone derivatives in vivo

Methylglyoxal (MG), an endogenous metabolite that increases in diabetes, is a common intermediate in nonenzymatic glycation (Maillard reaction) in vivo. Here we describe the immunochemical approach to the detection of MG adducts in proteins in vitro and in atherosclerotic lesions of human aorta in vivo. The reaction of protein (bovine serum albumin) with MG led to selective loss of arginine and lysine residues, accompanied by the formation of 5-methylimidazolone (N delta-(5-methylimidazolon-2-yl)ornithine) and imidazolysine (1,3-di-lysino-4-methylimidazole) derivatives, respectively. The anti-5-methylimidazolone antibody was prepared by immunizing rabbits with a MG-keyhole limpet hemocyanin conjugate and purifying the serum on an affinity gel prepared by covalent attachment of the 5-methylimidazolone derivative. The antibody cross-reacted with the proteins treated with not only MG but trioses, such as hydroxyacetone, dihydroxyacetone, and glyceraldehyde. The immunohistochemical analysis revealed that atherosclerotic lesions of human aorta contained 5-methylimidazolone derivatives whose distributions were identical to those of advanced glycation end products (AGEs) detected by the anti-AGE antibody.     

Robust stabilization of a magnetic suspension system using H∞ Control Theory

This paper presents the robust control design of a magnetic suspension system for a flexible beam which is a simplified model of an elastic rotor in a magnetic bearing system. To stabilize this magnetic suspension system which is unstable in nature, the H^infin; control theory is applied for a design of the control system. To apply the H^infin; control theory, a statespace model of an augmented plant with frequency-weighting functions is constructed. This augmented plant has two inputs which are the exogenous inputs and the control inputs, and two outputs which are the sensor outputs and the regulated outputs. Here we consider the mixed sensitivity problem. The H^infin; controller is implemented by a digital controller which is able to execute the computations very quickly. For the evaluation of the control performance, several experiments are made. The robustness of the closed-loop system is confirmed by the experimental results. The result of this study is useful for the control design of a magnetic bearing system.     

Syntheses and structural properties of four Rb-aluminosilicate zeolites

Four types of Rb-aluminosilicate zeolites were hydrothermally synthesized in pure phase for the first time from Rb-aluminosilicate gels without using any organic structure-directing agent (SDA) under stirring conditions. The crystal structure of each zeolite was refined by Rietveld analysis of the X-ray diffraction (XRD) data. These crystal structures were confirmed to be Rb-mordenite, Rb-merlinoite, a new aluminosilicate zeolite with an ATT framework topology, and Rb-offretite denoted by RMA-1, RMA-2, RMA-3, and RMA-4, respectively. The Si/Al ratio of RMA-1 with an MOR topology varied from 5.3 to 8.0; however, the variation of the Si/Al ratios of the other zeolites was rather small. The crystal system of RMA-2 was tetragonal with space group I4/mmm, where two Rb sites were distributed at the center of an 8-membered ring (MR). On the other hand, two Rb sites in RMA-3 were located at the center of the 8-MR in small two cages. The structure of RMA-4 was identified as the OFF type with a local disorder or defect, which included a small amount of an intergrown ERI phase.     

Carbon nanotubes prepared from three-layered copolymer microspheres of acrylonitrile and methylmethacrylate

Carbon nanotubes (CNTs) were synthesized from fine three-layered copolymer microspheres using the polymer blend technique. Diameter of PMMA core/Poly(AN-co-MMA) shell-1/PMMA shell-2 microspheres, prepared by a radical soap-free emulsion polymerization of methylmethacrylate (MMA) and acrylonitrile (AN), was between 400 nm and 500 nm. Microspheres were subjected to melt-spinning at 305 °C, stabilizing in oxygen at 220 °C for 4 h, and finally carbonizing at 1000 °C for 30 min. FE-SEM study of carbonized sample revealed the presence of CNTs arrays on carbon blocks. Similar arrays were observed in a comparative CNTs sample prepared from three-layered microspheres with the pure PAN shells-1 layers. HRTEM showed that the CNTs derived from copolymer microspheres had different structure when compared to the control sample, i.e. CNTs often adhered to each other and contained the internal compartments. The insufficient PMMA shell-2 coating of copolymer microspheres is believed to be a reason for CNTs adhesion. The possible mechanisms of the carbon block formation and the adhesion of CNTs are introduced.     

Release of salicylic acid through poly(vinyl alcohol)/poly(vinyl pyrrolidone) and poly(vinyl alcohol‐g‐N‐vinyl‐2‐pyrrolidone) membranes

A controlled release profile of salicylic acid (SA) for transdermal administration has been developed. Poly (vinyl alcohol) (PVA) and Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) (PVP) blended preparations were used to prepare the membranes by solvent‐casting technique. The release of the drug from the membranes was evaluated at in vitro conditions. The effects of PVA/PVP (v/v) ratio, pH, SA concentration and temperature were investigated. 60/40 (v/v) PVA/PVP ratio was found to be the best ratio for the SA release. Increase in pH and temperature was observed to increase the transport of SA. Instead of blending PVA with PVP, N‐Vinyl‐2‐pyrrolidone (VP) was grafted onto the PVA and the delivery performance for SA was compared with that of the blended PVA/PVP membranes. Grafted membranes gave higher transport percentages than the blended membranes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1244–1253, 2006     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006