In the last eight decades, considerable modelling and computational efforts have been made to predict the strain rate during cutting with the aim of optimizing machining processes. However, the validation of these modelling approaches on a local scale remains excessively limited due to the lack of in-situ measurements and the faulty existing quick-stop tests. This work presents the in-process analysis of the strain rate and strain in the primary shear zone using high speed Digital Image Correlation (DIC) techniques. The comparison of measured and computed results shows the suitability of the DIC techniques and the robustness of the modelling approaches. 相似文献
Calcium cobaltite Ca3Co4O9, abbreviated Co349, is a promising thermoelectric material for high-temperature applications in air. Its anisotropic properties can be assigned to polycrystalline parts by texturing. Tape casting and pressure-assisted sintering (PAS) are a possible future way for a cost-effective mass-production of thermoelectric generators. This study examines the influence of pressure and dwell time during PAS at 900°C of tape-cast Co349 on texture and thermoelectric properties. Tape casting aligns lentoid Co349. PAS results in a textured Co349 microstructure with the thermoelectrically favorable ab-direction perpendicular to the pressing direction. By pressure variation during sintering, the microstructure of Co349 can be tailored either toward a maximum figure of merit as required for energy harvesting or toward a maximum power factor as required for energy harvesting. Moderate pressure of 2.5 MPa results in 25% porosity and a textured microstructure with a figure of merit of 0.13 at 700°C, two times higher than the dry-pressed, pressureless-sintered reference. A pressure of 7.5 MPa leads to 94% density and a high power factor of 326 µW/mK2 at 800°C, which is 11 times higher than the dry-pressed reference (30 MPa) from the same powder. 相似文献
Demands on production, distribution and consumption of electrical energy change fundamentally with the energy revolution. Energy purchasing costs for inflexible consumers are rising and proceeds of inflexible producers are sinking. Companies are able to reduce costs by marketing operational flexibility options. This article sets out the need of flexibility in the energy system and the new marketing options. Flexibility potentials within infrastructure plants of a chemical park are analyzed, evaluated regarding marketing and activated in the presented research project FlexChemistry. 相似文献
Psychotropic Psilocybe mushrooms biosynthesize their principal natural product psilocybin in five steps, among them a phosphotransfer and two methyltransfer reactions, which consume one equivalent of 5′-adenosine triphosphate (ATP) and two equivalents of S-adenosyl-l -methionine (SAM). This short but co-substrate-intensive pathway requires nucleoside cofactor salvage to maintain high psilocybin production rates. We characterized the adenosine kinase (AdoK) and S-adenosyl-l -homocysteine (SAH) hydrolase (SahH) of Psilocybe cubensis. Both enzymes are directly or indirectly involved in regenerating SAM. qRT-PCR expression analysis revealed an induced expression of the genes in the fungal primordia and carpophores. A one-pot in vitro reaction with the N-methyltransferase PsiM of the psilocybin pathway demonstrates a concerted action with SahH to facilitate biosynthesis by removal of accumulating SAH. 相似文献
An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr2Re3 type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content. 相似文献
In this work, we contribute to the study of the structural reorganisation of biological tissues in response to mechanical stimuli. We specialise our investigation to a class of hydrated soft tissues, whose internal structure features reinforcing fibres. These are oriented statistically within the tissue, and their pattern of orientation is such that, at each material point, the tissue is anisotropic. From its natural, stress-free state, the tissue can be distorted anelastically into a global reference configuration, and then deformed under the action of external mechanical loads. The anelastic distortions are responsible for changing irreversibly the internal structure of the tissue, which, in the present context, occurs through both the rearrangement of the bonds among the tissue cells and the deformation-driven reorientation of the fibres. The anelastic strains, in addition, are assumed to model the onset and evolution of microcracks in the tissue, which may be triggered by the mechanical loads applied to the tissue in the case of traumatic events, or diseases. For our purposes, we formulate an anisotropic model of remodelling and we consider a fully isotropic model of structural reorganisation for comparison, with the aim to study if, how, and to what extent the evolution of anelastic distortions is influenced by the tissue’s anisotropy.
The influence of viscoelastic flow properties on fluid dynamics using radial impellers is investigated. The use of transparent model fluids allows for the optical measurement of general flow behavior with a fluorescence dying technique. By varying viscoelastic flow properties, size of agitators and rotational frequency, the impact of these parameters on fluid dynamics is analyzed. Toroidally shaped, cavern‐like flow compartments form around the agitators in all fluids in specific rotational frequency ranges, preventing an efficient mixing. By balancing elastic with centrifugal forces, a simple model is developed with which compartment sizes can be predicted with good accuracy. The results indicate a good suitability of the elasticity number as a scale‐up criterion. 相似文献
The flexible operation of energy-intensive processes, such as cryogenic air separation, has economic potential due to increasing fluctuations of the electricity markets. Multiproduct air separation processes with high ratios of liquid product are very promising for flexible operation due to storable products. We present a process design with an integrated liquefication cycle and liquid assist operation, that facilitates a high liquid product ratio and a flexible process operation. We use a mechanistic dynamic process model in steady-state process optimizations covering the wide operational range of the proposed process. The optimization results show that the power demand can be varied in a range from 3.5 to 28 MW without violating operational constraints by changing the nitrogen and oxygen production rates. Thus, the proposed process is a promising air separation candidate for flexible operation with respect to fluctuating electricity markets. 相似文献
The retinal ganglion cells (RGC) may be considered an easily accessible pathophysiological site of degenerative processes in neurological diseases, such as the RGC damage detectable in multiple sclerosis (MS) patients with (HON) and without a history of optic neuritis (NON). We aimed to assess and interrelate RGC functional and structural damage in different retinal layers and retinal sites. We included 12 NON patients, 11 HON patients and 14 healthy controls for cross-sectional multifocal pattern electroretinography (mfPERG) and optical coherence tomography (OCT) measurements. Amplitude and peak times of the mfPERG were assessed. Macula and disc OCT scans were acquired to determine macular retinal layer and peripapillary retinal nerve fiber layer (pRNFL) thickness. In both HON and NON patients the foveal N2 amplitude of the mfPERG was reduced compared to controls. The parafoveal P1 peak time was significantly reduced in HON only. For OCT, parafoveal (pfGCL) and perifoveal (pGCL) ganglion cell layer thicknesses were decreased in HON vs. controls, while pRNFL in the papillomacular bundle sector (PMB) showed reductions in both NON and HON. As the mfPERG derived N2 originates from RGC axons, these findings suggest foveal axonal dysfunction not only in HON, but also in NON patients. 相似文献