Physical map of the D6S149-D6S193 region on chromosome 6Q27 and its involvement in benign surface epithelial ovarian tumours

A detailed long range restriction map of the region defined by markers D6S149 and D6S193 on chromosome 6q27 has been constructed. This was achieved by YAC cloning and contig assembling of the same region. Seven YAC clones were found to span the almost 1000 Kb region flanked by the two markers which on the genetic map resulted to be 1.9 cM apart. With some of the characterized YAC clones we undertook a molecular cytogenetic analysis of 20 benign ovarian tumors. The rationale for this was the recent mapping to a region of chromosome 6q27, flanked by markers D6281 and D6S133, of a locus for the SV40-mediated immortalization of human cells (SEN6 gene). Noteworthy we found that the the D6S149-D6S193 region (comprised in the larger D6S281-D6S133 physical interval) was altered in all samples analysed adding support to the occurrence of a immortalization step in this type of tumors.     

Asymptotic solvers for second-order differential equation systems with multiple frequencies

In this paper, an asymptotic expansion is constructed to solve second-order differential equation systems with highly oscillatory forcing terms involving multiple frequencies. An asymptotic expansion is derived in inverse of powers of the oscillatory parameter and its truncation results in a very effective method of dicretizing the differential equation system in question. Numerical experiments illustrate the effectiveness of the asymptotic method in contrast to the standard Runge–Kutta method.     

Fabricating Strong and Stiff Bioplastics from Whole Spirulina Cells

Since the 1950s, 8.3 billion tonnes (Bt) of virgin plastics have been produced, of which around 5 Bt have accumulated as waste in oceans and other natural environments, posing severe threats to entire ecosystems. The need for sustainable bio-based alternatives to traditional petroleum-derived plastics is evident. Bioplastics produced from unprocessed biological materials have thus far suffered from heterogeneous and non-cohesive morphologies, which lead to weak mechanical properties and lack of processability, hindering their industrial integration. Here, a fast, simple, and scalable process is presented to transform raw microalgae into a self-bonded, recyclable, and backyard-compostable bioplastic with attractive mechanical properties surpassing those of other biobased plastics such as thermoplastic starch. Upon hot-pressing, the abundant and photosynthetic algae spirulina forms cohesive bioplastics with flexural modulus and strength in the range 3–5 GPa and 25.5–57 MPa, respectively, depending on pre-processing conditions and the addition of nanofillers. The machinability of these bioplastics, along with self-extinguishing properties, make them promising candidates for consumer plastics. Mechanical recycling and fast biodegradation in soil are demonstrated as end-of-life options. Finally, the environmental impacts are discussed in terms of global warming potential, highlighting the benefits of using a carbon-negative feedstock such as spirulina to fabricate plastics.     

Temperature and pump power dependent photoluminescence characterization of MBE grown GaAsBi on GaAs

Bulk and quantum well GaAs_1?xBi_x/GaAs layers with Bi mole fractions from 0.02 to 0.10 are grown by molecular-beam epitaxy at temperatures ranging from 280 to 320?°C. The samples are characterized using temperature and pump-power dependent photoluminescence measurements covering 8–300?K and 1–250?mW (7–1,800?W/cm²), respectively. The results indicate that there is strong reduction in bandgap energy with the incorporation of small amounts of Bi and that GaAsBi most likely forms a weak type-I band alignment with GaAs.     

Fluorescent polyacrylate derivate from 4-biphenylmethanol with UV-green emission

In this paper we report the synthesis of a new polyacrylate named poly(1,1?-BP4MA) which is a derivate from 4-biphenylmethanol monomer. Poly(1,1?-BP4MA) was obtained by solution and bulk polymerization techniques to yield polymers with high molecular weight and high solubility. The study of the optical properties showed that poly(1,1?-BP4MA) is a fluorescent material with emission in the UV-green region and it has similar quantum yield to tryptophan.     

On the use of peak-force tapping atomic force microscopy for quantification of the local elastic modulus in hardened cement paste

A surface of epoxy-impregnated hardened cement paste was investigated using a novel atomic force microscopy (AFM) imaging mode that allows for the quantitative mapping of the local elastic modulus. The analyzed surface was previously prepared using focussed ion beam milling. The same surface was also characterized by electron microscopy and energy-dispersive X-ray spectroscopy.We demonstrate the capability of this quantitative nanomechanical mapping to provide information on the local distribution of the elastic modulus (from about 1 to about 100 GPa) with a spatial resolution in the range of decananometers, that corresponds to that of low-keV back-scattered electron imaging. Despite some surface roughness which affects the measured nanomechanical properties it is shown that topography, adhesion and Young's modulus can be clearly distinguished.The quantitative mapping of the local elastic modulus is able to discriminate between phases in the cement paste microstructure that cannot be distinguished from the corresponding back-scattered electron images.     

Thermally Sprayed Coatings as Interlayers for DLC-Based Thin Films

This article examines the usefulness of a thick thermally sprayed interlayer (plasma-sprayed Ni-50%Cr, plasma-sprayed Al₂O₃-13%TiO₂, or high-velocity oxygen-fuel-sprayed WC-17%Co) for enhancing the wear resistance and the corrosion protectiveness of a diamond-like carbon (DLC)-based thin film deposited onto a carbon steel substrate. Scratch tests indicate that the Al₂O₃-13%TiO₂ and WC-17%Co interlayers definitely increase the critical spallation load of the thin film, but the Al₂O₃-13%TiO₂ interlayer itself undergoes brittle fracture under high-contact loads. Accordingly, during ball-on-disk tests at room temperature, no cracking and spallation occur in the DLC-based film deposited onto the WC-17%Co interlayer, whereas the one onto the Al₂O₃-13%TiO₂ interlayer is rapidly removed because the interlayer itself is fractured. At 300 °C, by contrast, the DLC-based film on the Al₂O₃-13%TiO₂ interlayer offers the best tribological performance, possibly thanks to the increased toughness of the ceramic interlayer at this temperature. Electrochemical polarization tests indicate that the thin film/WC-Co systems possess the lowest corrosion current density.     

Hot metal pretreatment by powder injection of lime‐based reagents

A mathematical model earlier proposed has been improved to predict the kinetics of multicomponent reactions in the hot metal pretreatment through the injection of reactive fluxes. It is assumed that there are two reaction zones along the flux injection operation: a transitory reaction between the rising particles and the bulk metal, and the permanent reaction between the metal and the top slag. A criterion to estimate the fraction of solids which will react with molten iron in a three‐phase jet (gas‐solid‐liquid) was considered; this fraction of solids carries out the transitory reaction. The model also takes into account the thermodynamic changes produced in the metal and slag due to the chemical reactions. Calculated results of the model are in good agreement with experimental results for the desulfurization of hot metal through the injection of CaO‐SiO₂‐CaF₂‐FeO‐Na₂O reagents at 1400 ‐ 1450 °C. Two kinds of hot metal were tested, one with a low carbon mass content of 3 % and the other with a high carbon mass content of 4.5 %.