Estimating the altitude of aerosol plumes over the ocean from reflectance ratio measurements in the O2 A-band

A methodology is proposed to infer the altitude of aerosol plumes over the ocean from reflectance ratio measurements in the O₂ absorption A-band (759 to 770 nm). The reflectance ratio is defined as the ratio of the reflectance in a first spectral band, strongly attenuated by O₂ absorption, and the reflectance in a second spectral band, minimally attenuated. For a given surface reflectance, simple relations are established between the reflectance ratio and the altitude of an aerosol layer, as a function of atmospheric conditions and the geometry of observation. The expected accuracy for various aerosol loadings and models is first quantified using an accurate, high spectral resolution, radiative transfer model that fully accounts for interactions between scattering and absorption. The method is developed for POLDER and MERIS, satellite sensors with adequate spectral characteristics. The simulations show that the method is only accurate over dark surfaces when aerosol optical thickness at 765 nm is relatively large (> 0.3). In this case, the expected accuracy is on the order of ± 0.5 km or ± 0.2 km for POLDER or MERIS respectively. More accurate estimates are obtained with MERIS, since in this case the spectral reflectance ratio is more sensitive to aerosol altitude. However, a precise spectral calibration is needed for MERIS. The methodology is applied to MERIS and POLDER imagery acquired over marine surfaces. The estimated aerosol altitude is compared with in situ lidar profiles of backscattering coefficient measured during the AOPEX-2004 experiment for MERIS, or obtained with the space-borne lidar CALIOP for POLDER. The retrieved altitudes agree with lidar measurements in a manner consistent with theory. These comparisons demonstrate the potential of the differential absorption methodology for obtaining information on aerosol altitude over dark surfaces.     

Aryl Bis‐Sulfonamide Inhibitors of IspF from Arabidopsis thaliana and Plasmodium falciparum

2‐Methylerythritol 2,4‐cyclodiphosphate synthase (IspF) is an essential enzyme for the biosynthesis of isoprenoid precursors in plants and many human pathogens. The protein is an attractive target for the development of anti‐infectives and herbicides. Using a photometric assay, a screen of 40 000 compounds on IspF from Arabidopsis thaliana afforded symmetrical aryl bis‐sulfonamides that inhibit IspF from A. thaliana (AtIspF) and Plasmodium falciparum (PfIspF) with IC₅₀ values in the micromolar range. The ortho‐bis‐sulfonamide structural motif is essential for inhibitory activity. The best derivatives obtained by parallel synthesis showed IC₅₀ values of 1.4 μm against PfIspF and 240 nm against AtIspF. Substantial herbicidal activity was observed at a dose of 2 kg ha^?1. Molecular modeling studies served as the basis for an in silico search targeted at the discovery of novel, non‐symmetrical sulfonamide IspF inhibitors. The designed compounds were found to exhibit inhibitory activities in the double‐digit micromolar IC₅₀ range.     

Combinatorial auctions for exchanging resources over a grid network

In grid systems, users compete for different types of resources such that they may execute their applications. Traditional grid systems are formed of organisations that join together for the purpose of collaborative projects. Resources of each of the participating organisation are pooled such that members of individual organisations may access the shared infrastructure. In general, each participant is both a provider and a consumer of resources. Whilst such systems address large organisations, in this paper we address democratic grid systems to satisfy needs of small organisations and even individuals, where on-demand grids may be formed by drawing idling resources available on the Internet. Whilst traditional grid systems resort to allocations that satisfy system specific objectives such as maximization of the resource utilisation, market mechanisms try to obtain allocations that are efficient economically. Economic mechanisms permit to achieve equilibrium between supply and demand and furthermore provide incentives for providers. Combinatorial auction has been argued as an effective mechanism to address the problem of resource allocation within grid systems. Auctions within which multiple types of resources in varying quantities may be traded eliminate the exposure problem by addressing co-allocation. In this paper, we describe a combinatorial exchange where multiple providers and multiple consumers may participate. We describe the winner determination problem that incorporates the time dimension, i.e. resource bundles may be requested for different time ranges, and describe a set of heuristics that have been designed to be fast. We show that these achieve a high level of efficiency as compared to exact solutions. The second part focusses on the pricing problem. The objective is to compute prices that represent the state of the market and bring trustworthy feedback to participants. Drawing on the approach taken by Kwasnica et al. (Manage Sci 51(3):419–434, 2005), we propose a pricing model that computes per-item pricing. Per-item pricing allows users to deduce the price of bundles that they require by linear summation. Furthermore, we propose a model that computes prices as a function of time, thus permitting users, in particular consumers to adjust their demand trading off price and time of execution.     

Transparent polycrystalline alumina obtained by SPS: Green bodies processing effect

Starting from a commercial slurry of high purity α-Al₂O₃, freeze-dried powders, cast, filter-pressed or cold isostatically pressed samples were produced. Resulting powders or green bodies showing different particles packing were densified by spark plasma sintering (SPS) to obtain transparent polycrystalline α-Al₂O₃. Microstructure and real in-line transmittance (RIT) after SPS were dependent on the particles packing quality. Avoiding large agglomerates, narrowing the pore size distribution, reducing the most-frequent pore size (D_mode) and avoiding macroscopic heterogeneities within the green bodies enabled high RIT values to be achieved in the visible and near-infrared spectrum. However, a limit was achieved in the preparation of green bodies for which reducing the D_mode had no more influence on the optical behaviour of samples sintered by SPS. Finally, pure α-Al₂O₃ samples presenting a high RIT_640 nm value of 53% were produced from all the green bodies obtained by the following techniques: filter-pressing, slip casting and cold isostatic pressing.     

Contact formation dynamics: Mapping chemical bond formation between a molecule and a metallic probe

We present a study that maps out chemical bond formation between a Pt-inked probe and a single 1,3-cyclohexadiene (1,3-CHD) molecule on Si(100). By separating the mechanical and electronic contributions to the current during the approach to contact, we show that there are significant forces between the probe and the C=C of the molecule and we track the relaxation of the molecule, the emergence of a chemical bond feature in the LDOS, and the quenching of specific molecular vibrations during bond formation.     

Prion degradation in soil: possible role of microbial enzymes stimulated by the decomposition of buried carcasses

This study is part of a European project focused on understanding the biotic and abiotic mechanisms involved in the retention and dissemination of transmissible spongiform encephalopathies (TSE) infectivity in soil in order to propose practical recommendations to limit environmental contamination. A 1-year field experiment was conducted with lamb carcasses buried in a pasture soil at three depths (25, 45, and 105 cm). Microbial community response to carcasses was monitored through the potential proteolytic activity and substrate induced respiration (SIR). Soil above carcasses and control soil exhibited low proteolytic capacity, whatever the depth of burial. Contrastingly, in soil beneath the carcasses, proteolysis was stimulated. Decomposing carcasses also stimulated SIR, i.e., microbial biomass, suggesting that proteolytic populations specifically developed on lixiviates from animal tissues. Decomposition of soft tissues occurred within 2 months at subsurface while it lasted at least 1 year at deeper depth where proteolytic activities were season-dependent. The ability of soil proteases to degrade the beta form of prion protein was shown in vitro and conditions of burial relevant to minimize the risk of prion protein dissemination are discussed.     

Mechanical testing of titanium/aluminium–silicon interfaces by push-out

Mechanical properties of Ti/Al–7Si assemblies produced by insert moulding were studied with a classical push-out test and a variant that is the circular-bending test. Special care has been taken for controlling both the reactivity at the Ti/Al–7Si interface and the metallurgical health of the Al–7Si matrix. Mechanical tests until complete debonding have been completed with interrupted tests, metallographic characterizations and FEM analysis of elastic stress state. A mean shear strength of the interface of about 120 MPa was obtained. When the Ti insert is solely fretted in the matrix, without chemical interaction between Ti and the Al–7Si alloy, the mean shear strength is significantly lower (48 MPa). This result clearly shows that chemical interaction at the interface (formation of a thin TiSi layer at the Ti side and a thick Al₃Ti(Si) layer at the Al–7Si alloy side) improves the mechanical properties of the assembly. It is also shown that the failure sequence is characterized both by crack propagation from bottom to top and matrix yielding from top to bottom. Actually, interface damaging begins by crack initiation at the specimen bottom face (not at the top face and under the indenter) in a nearly pure mode I solicitation at a radial tensile stress of about 100 MPa.     

Metabolomic Reprogramming of C57BL/6-Macrophages during Early Infection with L. amazonensis

Leishmania survival inside macrophages depends on factors that lead to the immune response evasion during the infection. In this context, the metabolic scenario of the host cell–parasite relationship can be crucial to understanding how this parasite can survive inside host cells due to the host’s metabolic pathways reprogramming. In this work, we aimed to analyze metabolic networks of bone marrow-derived macrophages from C57BL/6 mice infected with Leishmania amazonensis wild type (La-WT) or arginase knocked out (La-arg⁻), using the untargeted Capillary Electrophoresis-Mass Spectrometry (CE-MS) approach to assess metabolomic profile. Macrophages showed specific changes in metabolite abundance upon Leishmania infection, as well as in the absence of parasite-arginase. The absence of L. amazonensis-arginase promoted the regulation of both host and parasite urea cycle, glycine and serine metabolism, ammonia recycling, metabolism of arginine, proline, aspartate, glutamate, spermidine, spermine, methylhistidine, and glutathione metabolism. The increased L-arginine, L-citrulline, L-glutamine, oxidized glutathione, S-adenosylmethionine, N-acetylspermidine, trypanothione disulfide, and trypanothione levels were observed in La-WT-infected C57BL/6-macrophage compared to uninfected. The absence of parasite arginase increased L-arginine, argininic acid, and citrulline levels and reduced ornithine, putrescine, S-adenosylmethionine, glutamic acid, proline, N-glutamyl-alanine, glutamyl-arginine, trypanothione disulfide, and trypanothione when compared to La-WT infected macrophage. Moreover, the absence of parasite arginase leads to an increase in NO production levels and a higher infectivity rate at 4 h of infection. The data presented here show a host-dependent regulation of metabolomic profiles of C57BL/6 macrophages compared to the previously observed BALB/c macrophages infected with L. amazonensis, an important fact due to the dual and contrasting macrophage phenotypes of those mice. In addition, the Leishmania-arginase showed interference with the urea cycle, glycine, and glutathione metabolism during host–pathogen interactions.     

Production of short-chain fatty acids from resistant starch in a pig model

This study was performed to estimate the pool of SCFA produced in the digestive tract of growing pigs after the consumption of diets containing dif-ferent sources of resistant starch (RS) (15 g per meal) (potato starch (PoS), high amylose maize starch (HS) and retrograded extruded HS (RHS)). SCFA production in vitro was respectively 19, 23 and 21 mmol g⁻¹ of fermented PoS, HS and RHS. The highest butyric acid production was observed with PoS. Fifty six, 36 and 19% respectively of ingested PoS, HS and RHS escaped digestion in the small intestine, whereas residual starch was completely fermented in the large bowel. Luminal total SCFA in the caeco-colon 7 h after the experimental meal were respectively 33, 78 and 105 mmol for PoS, HS and RHS, with PoS providing the highest production of butyric acid. Theoretical in vivo SCFA production, calculated on the basis of results for in vitro fermentation and ileal digestibility, differed from in vivo results for PoS (+65%) and HS (-13%), but not for RHS. This study reveals different rates of disappearance of RS both in vitro and in vivo. © 1998 SCI.