In vitro cytotoxicity of monticellite based bioactive ceramic powder synthesized from boron derivative waste

The cytotoxicity of monticellite based bioactive ceramic powder, which was synthesized from boron derivative waste has been determined by in vitro assays of MTT, NRU, and JC-1 staining. The toxicity of powder on different mammalian cell lines (3T3-L1, HUVEC, CRL-2120) was evaluated at the concentrations of 10, 100, 200, 400 and 800?µg/mL to justify its potential for biomedical applications. The obtained results showed that monticellite based bioactive ceramic powder possesses not only bioactive feature but also biocompatible characteristic at the concentration range of 10–200?µg/mL. Hence, monticellite based bioactive ceramics have high potential as a bone graft substitute for bone void filling and coating applications.     

Influence of Laser Peening With and Without Coating on the Surface Properties and Stress Corrosion Cracking Behavior of Laser-Welded 304 Stainless Steel

Metallurgical and Materials Transactions A - This study aims to investigate the effect of laser peening with (LP) and without coating (LPwC) process on subsurface microstructural evolution,...     

AN INTERPRETATION OF THE IMPACT OF REGIONAL SCIENCE IN TERMS OF PHILOSOPHY OF SCIENCE

ABSTRACT: This article evaluates the performance of regional science from the perspective of the philosophy of science. The debate regarding the field's performance has drawn wide interest among those working in regional science and has been a stimulus to consider and reinterpret a number of approaches in the philosophy of science. It is believed that an evaluation and reinterpretation of the major approaches in the philosophy of science, such as the positivist, humanistic and structuralist outlooks, could be useful in helping make an ultimate evaluation of the recent literature regarding regional science. In this article, a comparison is made between those paradigms within the development processes that are relevant to regional science and with respect to differentiation between less developed countries (LDC) and developed countries. It is concluded that despite the considerable achievements that have occurred in regional science from the 1950s up to the present some significant questions in the field suggest requirements for a paradigm change, particularly for a field of knowledge that can be applied to developing areas.     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Thieno[3,2-b]thiophene as π-bridge at different acceptor systems for electrochromic applications

Benzoselenadiazole, quinoxaline and thieno[3,2-b]thiophene are the units preferred in conducting polymers due to their electrochemical properties. There are no reports in the literature on polymers containing both moieties. In this study, novel benzoselenadiazole, quinoxaline and thieno[3,2-b]thiophene based monomers; 4-(3a,6a-dihydrothieno[3,2-b]thiophen-2-yl)-7-(thieno[3,2-b]thiophenyl)benzo[c][1,2,5]selenadiazole (BSeTT) and 2,3-bis(3,4-bis(decyloxy)phenyl)-5,8-dibromo-2,3-dihydroquinoxaline (QTT) were synthesized via Stille Coupling and polymerized electrochemically. These polymers were characterized in terms of their spectroelectrochemical and electrochemical properties by cyclic voltammetry and UV–Vis–NIR spectroscopy. Spectroelectrochemistry analysis of PBSeTT revealed an electronic transition at 525 nm corresponding to π–π* transition with a band gap of 0.93 eV whereas PQTT revealed electronic transitions at 440 and 600 nm corresponding to π–π* transitions with a band gap of 1.30 eV. Electrochromic investigations showed that PBSeTT has gray color PQTT switching between green and gray. Switching time of the polymers was evaluated by a kinetic study upon measuring the percent transmittance (%T) at the maximum contrast point.     

Mechanical,chemical, thermal,and rheological properties of recycled PA6/ABS binary and PA6/PA66/ABS ternary blends

The effects of multiple injection molding cycles on the chemical and mechanical properties of PA6/ABS and PA6/PA66/ABS blends are investigated. The chemical structures of both PA6/ABS binary and PA6/PA66/ABS ternary blends do not alter after recycling process. For PA6/ABS binary blend, it is found that the tensile strength, strain at break, elastic modulus, impact strength, flexural strength, and modulus of recycled blend decrease by 6.49%, 15.19%, 21.00%, 9.41%, 7.09%, and 8.25%, respectively, while MFI increases by 23.59% as compared with the virgin blend. After five recycling process for PA6/PA66/ABS ternary blend, the tensile strength, strain at break, and impact strength of recycled blend decrease by 18.00%, 50.80%, and 87.27%, respectively. However, flexural strength and modulus of PA6/PA66/ABS blend increase slightly. For virgin PA6/PA66/ABS blend, MFI value was 7.7 g/10 min and with recycling this value showed an important increase to 31.56 g/10 min after five cycles. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40810.     

Effect of gas permeation temperature and annealing procedure on the performance of binary and ternary mixed matrix membranes of polyethersulfone,SAPO‐34, and 2‐hydroxy 5‐methyl aniline

This study investigated the effect of annealing time and temperature on gas separation performance of mixed matrix membranes (MMMs) prepared from polyethersulfone (PES), SAPO‐34, and 2‐hydroxy 5‐methyl aniline (HMA). A postannealing period at 120°C for a week extensively increased the reproducibility and stability of MMMs, but for pure PES membranes no post‐annealing was necessary for stable and reproducible performance. The effect of operation temperature was also investigated. The permeabilities of H₂, CO₂, and CH₄ increased with increasing permeation temperature from 35°C to 120°C, yet CO₂/CH₄ and H₂/CH₄ selectivities decreased. PES/SAPO‐34/HMA ternary and PES/SAPO‐34 binary MMMs exhibited the highest ideal selectivity and permeability values at all temperatures, respectively. For H₂/CO₂ pair, when temperature increased from 35°C to 120°C, selectivity increased from 3.2 to 4.6 and H₂ permeability increased from 8 to 26.5 Barrer for ternary MMM, demonstrating the advantage of using this membrane at high temperatures. The activation energies were in the order of CH₄ > H₂ > CO₂ for all membranes. PES/SAPO‐34/HMA membrane had activation energies higher than that of PES/SAPO‐34 membrane, suggesting that HMA acts as a compatibilizer between the two phases. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40679.     

Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Effects of blade tenderization,aging method and aging time on meat quality characteristics of Longissimus lumborum steaks from cull Holstein cows

The effects of blade tenderization (BT), two aging methods (dry (D) and wet (W)), and aging time (2 and 23 d) on tenderness, color, and sensory properties of Longissimus lumborum muscles from 12 cull Holstein cows were evaluated. Dry-aged loins had higher combined trim and aging losses than control (C) for both D- and W-aging, mostly because of excess trim losses. BT steaks had WBSF of 33.13 N while C steaks had WBSF of 41.46 N (P = 0.09). Aging decreased WBSF. Blade tenderized steaks had higher cook loss than C steaks. Aging, W-aging, and BT × W-aging improved myofibrillar (sensory) tenderness scores. Aging and/or BT improves sensory panel tenderness cull cow Longissimus lumborum steaks. Aging and blade tenderization combined can increase tenderness and value of Longissimus steaks from cull Holstein cows.