Emission of core-excited autoionizing sodium atoms from NaCl induced by electron bombardment

In the time-of-flight spectrum of positive ions produced by electron bombardment of NaCl surface a delayed signal of Na⁺ is detected. This observation is attributed to production of core-excited autoionizing metastable Na^** atoms which have their characteristic lifetimes in the 100 ns range. Moreover, it is noticed that the populations of the various metastable Na^** states depend on the NaCl layer thickness. The lifetimes of some quartet metastable Na^** states have been determined as well.     

Molecular orientation and stress in biaxially deformed polymers. II. Steady potential flow

The development of biaxial segmental orientation and stress in a flexible-chain polymer fluid subjected to steady biaxial extensional flow is analyzed. Closed-formula model based on the Padè approximation of the inverse Langevin function in the non-Gaussian distribution of the chain end-to-end vectors is considered. The approach is free from the limitations related to finite chain extensibility and slow convergence of the series expansion formulations at higher chain deformations.Segmental orientation is characterized by the average orientation tensor, related axial orientation factors and global orientation anisotropy. Orientational behavior and corresponding stresses in the biaxial elongational potential flow are discussed in a wide range of elongation rates. Orientation characteristics calculated for the biaxial flow deformation are much higher than those predicted for the affine biaxial stretch deformation in polymer solids.     

Rapid degradation of the mycotoxin patulin in man quantified by stable isotope dilution assays

The absorption and degradation of the mycotoxin patulin in man was quantified by using a recently developed stable isotope dilution assay. Application of this currently most sensitive method revealed a patulin content less than 200 ng l -1 in the blood serum of five consumers of apple juice. Likewise, no patulin was found in the serum of a volunteer, whose blood was drawn shortly after consumption of a juice containing a maximum tolerable amount of patulin. In further in vitro experiments, the degradation of patulin by reacting it with whole blood was investigated. After addition of 100 μg patulin to 9 ml blood, only 6.1% of the mycotoxin was detected after 2 min. It was concluded, therefore, that even high naturally occurring concentrations of patulin in foods are quickly degraded before reaching other tissues than the gastrointestinal tract.     

Solubility and Aggregation of Selected Proteins Interpreted on the Basis of Hydrophobicity Distribution

Protein solubility is based on the compatibility of the specific protein surface with the polar aquatic environment. The exposure of polar residues to the protein surface promotes the protein’s solubility in the polar environment. The aquatic environment also influences the folding process by favoring the centralization of hydrophobic residues with the simultaneous exposure to polar residues. The degree of compatibility of the residue distribution, with the model of the concentration of hydrophobic residues in the center of the molecule, with the simultaneous exposure of polar residues is determined by the sequence of amino acids in the chain. The fuzzy oil drop model enables the quantification of the degree of compatibility of the hydrophobicity distribution observed in the protein to a form fully consistent with the Gaussian 3D function, which expresses an idealized distribution that meets the preferences of the polar water environment. The varied degrees of compatibility of the distribution observed with the idealized one allow the prediction of preferences to interactions with molecules of different polarity, including water molecules in particular. This paper analyzes a set of proteins with different levels of hydrophobicity distribution in the context of the solubility of a given protein and the possibility of complex formation.     

Phase equilibria in the cobalt oxide-copper oxide system

Thermodynamic properties were determined for the system cobalt oxide-copper oxide by means of an electromotive force (EMF) measurement techniques using galvanic cells with calciastabilized zirconia (CSZ) as the solid electrolyte and with air as the reference electrode according to the following schemes: CuO, Cu₂O | CSZ | air and CoO-CuO, Cu₂O CSZ | air for composition variables y=X_Cu/(X_Co+X_cu equal to 0.05, 0.15, 0.25, 0.35, 0.45, 0.667, and 0.8; and within the temperature interval 1200–1350 K. Thermodynamic properties calculated directly from EMF values were combined with the available literature data on phase equilibria, and thermodynamic properties of solid phases in the Co-Cu-O system were assessed. Both terminal solid solutions, (Co,Cu)O and (Cu,Co)O, were described by a sublattice model with Redlich-Kister excess term. The interaction parameters for both (Co,Cu)O and (Cu,Co)O solid solutions and the Gibbs energy of formation for the intermediate phase Cu₂CoO₃ were obtained. The Gibbs energies of fictive end-members: monoclinic “CoO” and “CuO” with rock salt structure were derived as well. The phase diagrams were calculated using the assessed thermodynamic parameters. The (T, y) phase diagram was calculated for existence under ambient air. The property diagrams log₁₀P(O₂) versus composition and activity of CuO versus composition were calculated at 1273 K. The results of our calculations were in a good agreement with available experimental data.     

New method for the on-line signature verification based on horizontal partitioning

Verification of identity based on the analysis of dynamic signatures is an important problem of biometrics. The effectiveness of the verification significantly increases when the dynamic characteristics of signature (e.g. velocity of the pen) are considered. These characteristics are individual for each user and difficult to imitate. The effectiveness of the verification can be further improved by using partitioning. In this paper we propose a new method which uses partitioning. In our method partitions represent areas of high and low speed of signature and high and low pen?s pressure. All selected partitions are used by our algorithm, but more important in the classification process are these partitions, in which the signatures of the user acquired during training phase are more stable. Moreover, final classification is interpretable. In this paper we present the simulation results of the proposed method for the two databases: SVC2004 and BioSecure Database.     

Studies on a New Concept of 3D Data Integration about Reaches and Forces of a Disabled Person on a Wheelchair (CAD Methods in Car and Market Ergonomics)

The article presents a new concept of combining the three dimensions (3D) of a person's manipulation space. The data concern information about the reach of the arms and biomechanical data about limiting the load of a disabled person sitting in a wheelchair. Measurement data were acquired empirically, on original measuring station. The data included, respectively, arms' reach (static and dynamic) or, alternatively, measurements of limiting forces. The obtained data were processed into virtual 3D surfaces of arms' reach and forces. These surfaces provide the required graphic model of anthropotechnical and biomechanical data. Developed model was utilized to perform a virtual analysis of the accessibility of a disabled person to technical means: in a market sale space and in the ergonomic analysis into the space of a personal car. The presented method of 3D graphic modeling of anthropometrical and biomechanical data can be universally applied in ergonomic designing of work stations not only for disabled persons. © 2011 Wiley Periodicals, Inc.     

Opportunistic resource utilization networks—A new paradigm for specialized ad hoc networks

We present opportunistic resource utilization networks or oppnets, a novel paradigm of specialized ad hoc networks. We believe that applications can benefit from using specialized ad hoc networks that provide a natural basis for them, the basis more efficient and effective than what general-purpose ad hoc networks can offer. Oppnets constitute the subcategory of ad hoc networks where diverse systems, not employed originally as nodes of an oppnet, join it dynamically in order to perform certain tasks they have been called to participate in. Oppnets have a significant potential to improve a variety of applications, and to create new application niches. We categorize opportunistic networks currently known in the literature as class 1opportunistic networks that use opportunistically only communication resources, and class 2opportunistic networks or oppnets that use opportunistically all kinds of resources, including not only communication but also computation, sensing, actuation, storage, etc. After describing the oppnets and the basics of their operation, we discuss the Oppnet Virtual Machine (OVM)—a proposed standard implementation framework for oppnet applications. It is followed by a discussion of an example application scenario using the OVM primitives. Next, we discuss the design and operations of a small-scale oppnet, named MicroOppnet, originally developed as a proof of concept. MicroOppnet is now being extended to serve as a testbed for experimentation and pilot implementations of oppnet architectures and their components. We conclude with a summary and a list of some open issues for oppnets.     

A parallel direct solver for the self-adaptive hp Finite Element Method

In this paper we present a new parallel multi-frontal direct solver, dedicated for the hp Finite Element Method (hp-FEM). The self-adaptive hp-FEM generates in a fully automatic mode, a sequence of hp-meshes delivering exponential convergence of the error with respect to the number of degrees of freedom (d.o.f.) as well as the CPU time, by performing a sequence of hp refinements starting from an arbitrary initial mesh. The solver constructs an initial elimination tree for an arbitrary initial mesh, and expands the elimination tree each time the mesh is refined. This allows us to keep track of the order of elimination for the solver. The solver also minimizes the memory usage, by de-allocating partial LU factorizations computed during the elimination stage of the solver, and recomputes them for the backward substitution stage, by utilizing only about 10% of the computational time necessary for the original computations. The solver has been tested on 3D Direct Current (DC) borehole resistivity measurement simulations problems. We measure the execution time and memory usage of the solver over a large regular mesh with 1.5 million degrees of freedom as well as on the highly non-regular mesh, generated by the self-adaptive hp$hp$-FEM, with finite elements of various sizes and polynomial orders of approximation varying from p=1$p=1$ to p=9$p=9$. From the presented experiments it follows that the parallel solver scales well up to the maximum number of utilized processors. The limit for the solver scalability is the maximum sequential part of the algorithm: the computations of the partial LU factorizations over the longest path, coming from the root of the elimination tree down to the deepest leaf.