Genetic Carriers and Genomic Distribution of cadA6—A Novel Variant of a Cadmium Resistance Determinant Identified in Listeria spp.

Listeria monocytogenes is a pathogen responsible for severe cases of food poisoning. Listeria spp. strains occurring in soil and water environments may serve as a reservoir of resistance determinants for pathogenic L. monocytogenes strains. A large collection of Listeria spp. strains (155) isolated from natural, agricultural, and urban areas was screened for resistance to heavy metals and metalloids, and the presence of resistance determinants and extrachromosomal replicons. Of the tested strains, 35% were resistant to cadmium and 17% to arsenic. Sequence analysis of resistance plasmids isolated from strains of Listeria seeligeri and Listeria ivanovii, and the chromosome of L. seeligeri strain Sr73, identified a novel variant of the cadAC cadmium resistance efflux system, cadA6, that was functional in L. monocytogenes cells. The cadA6 cassette was detected in four Listeria species, including strains of L. monocytogenes, isolated from various countries and sources—environmental, food-associated, and clinical samples. This resistance cassette is harbored by four novel composite or non-composite transposons, which increases its potential for horizontal transmission. Since some cadAC cassettes may influence virulence and biofilm formation, it is important to monitor their presence in Listeria spp. strains inhabiting different environments.     

Role of Polyinosinic:Polycytidylic Acid-Induced Maternal Immune Activation and Subsequent Immune Challenge in the Behaviour and Microglial Cell Trajectory in Adult Offspring: A Study of the Neurodevelopmental Model of Schizophrenia

Multiple lines of evidence support the pathogenic role of maternal immune activation (MIA) in the occurrence of the schizophrenia-like disturbances in offspring. While in the brain the homeostatic role of neuron-microglia protein systems is well documented, the participation of the CX3CL1-CX3CR1 and CD200-CD200R dyads in the adverse impact of MIA often goes under-recognized. Therefore, in the present study, we examined the effect of MIA induced by polyinosinic:polycytidylic acid (Poly I:C) on the CX3CL1-CX3CR1 and CD200-CD200R axes, microglial trajectory (MhcII, Cd40, iNos, Il-1β, Tnf-α, Il-6, Arg1, Igf-1, Tgf-β and Il-4), and schizophrenia-like behaviour in adult male offspring of Sprague-Dawley rats. Additionally, according to the “two-hit” hypothesis of schizophrenia, we evaluated the influence of acute challenge with Poly I:C in adult prenatally MIA-exposed animals on the above parameters. In the present study, MIA evoked by Poly I:C injection in the late period of gestation led to the appearance of schizophrenia-like disturbances in adult offspring. Our results revealed the deficits manifested as a diminished number of aggressive interactions, presence of depressive-like episodes, and increase of exploratory activity, as well as a dichotomy in the sensorimotor gating in the prepulse inhibition (PPI) test expressed as two behavioural phenotypes (MIA_PPI-low and MIA_PPI-high). Furthermore, in the offspring rats subjected to a prenatal challenge (i.e., MIA) we noticed the lack of modulation of behavioural changes after the additional acute immune stimulus (Poly I:C) in adulthood. The important finding reported in this article is that MIA affects the expression and levels of the neuron-microglia proteins in the frontal cortex and hippocampus of adult offspring. We found that the changes in the CX3CL1-CX3CR1 axis could affect microglial trajectory, including decreased hippocampal mRNA level of MhcII and elevated cortical expression of Igf-1 in the MIA_PPI-high animals and/or could cause the up-regulation of an inflammatory response (Il-6, Tnf-α, iNos) after the “second hit” in both examined brain regions and, at least in part, might differentiate behavioural disturbances in adult offspring. Consequently, the future effort to identify the biological background of these interactions in the Poly I:C-induced MIA model in Sprague-Dawley rats is desirable to unequivocally clarify this issue.     

Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels

Quenching and partitioning (Q&P) and a novel combined process of hot straining (HS) and Q&P (HSQ&P) treatments have been applied to a TRIP-assisted steel in a Gleeble®3S50 thermomechanical simulator. The heat treatments involved intercritical annealing at 800 °C and a two-step Q&P heat treatment with a partitioning time of 100 seconds at 400 °C. The “optimum” quench temperature of 318 °C was selected according to the constrained carbon equilibrium (CCE) criterion. The effects of high-temperature deformation (isothermal and non-isothermal) on the carbon enrichment of austenite, carbide formation, and the strain-induced transformation to ferrite (SIT) mechanism were investigated. Carbon partitioning from supersaturated martensite into austenite and carbide precipitation were confirmed by means of atom probe tomography (APT) and scanning transmission electron microscopy (STEM). Austenite carbon enrichment was clearly observed in all specimens, and in the HSQ&P samples, it was significantly greater than in Q&P, suggesting an additional carbon partitioning to austenite from ferrite formed by the deformation-induced austenite-to-ferrite transformation (DIFT) phenomenon. By APT, the carbon accumulation at austenite/martensite interfaces was observed, with higher values for HSQ&P deformed isothermally (≈ 11 at. pct), when compared with non-isothermal HSQ&P (≈ 9.45 at. pct) and Q&P (≈ 7.6 at. pct). Moreover, a local Mn enrichment was observed in a ferrite/austenite interface, indicating ferrite growth under local equilibrium with negligible partitioning (LENP).

     

Kinetic model of NOx ozonation and its experimental verification

The most of new technologies of reduction of NO_x emission, as literature survey (Skalska et al., 2010b) suggests is focused on NO_x emission control from power plants and mobile vehicles. Fewer investigations are conducted on the NO_x emission abatement from chemical industry. Recently, Chacuk et al. (2007) proposed the model for the nitrous acid oxidation with the use of ozone in gas–liquid contactor. It is well known that not all of NO_x can be totally absorbed in water or nitrous/nitric acid solution, as well as ozone is not totally consumed in the acidic liquid. The reaction between ozone and NO_x can take place also in the gas phase. The ozone injection into exhaust gas stream followed by absorption was proposed as the NO_x emission abatement. The objective of these studies was to propose kinetic model of the process and to determine the rate constants of NO_x ozonation in the laboratory scale batch reactor. The process was carried out in the 0.5 dm³ volume batch reactor for different concentrations of NO, and NO₂ and varying molar ratios of O₃/NO at temperature 25 °C. Gaseous reagents were analyzed using a Fourier Transform Infrared Spectrometer Jasco FTIR-4200. The kinetic model of NO_x ozonation process was proposed and rate constants were estimated based on experimental data.     

Novel biodegradable form stable phase change materials: Blends of poly(ethylene oxide) and gelatinized potato starch

Novel biodegradable form stable phase change materials were obtained in a process involving potato starch gelatinization in water/poly(ethylene oxide) (PEO) solution. DSC and microscopic investigations revealed that the presence of the starch considerably changes PEO phase transition behavior–in the blends solid–solid phase transition for PEO/starch 1 : 3 and 1 : 1 w/w has been observed; for PEO/starch blend 3 : 1 w/w solid–solid phase transition with a partial melting of PEO unbounded through hydrogen bonds with starch has been detected. The heat of phase transition depends on the strength of hydrogen bonds between PEO and starch. The intermolecular interactions were evidenced by FTIR analysis, which showed considerably shift of the stretching vibration bands of both the O? H group (proton‐donor group) from starch and PEO. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Sorption of phosphorous to Filtralite-P--the effect of different scales

Sorption of P to the filter material Filtralite-P was examined at a small, medium and large scale. In the small- and meso-scale laboratory models, the sorbed amount of total phosphorus (P) was heterogeneously distributed with more P sorbed in the inlet zone and the bottom layers. The full-scale system had, on the other hand, the highest sorbed concentration in the outlet region. The overall P sorption capacity of the material was 8030, 4990 and 521 mg P kg(-1) Filtralite-P for Box 1, Box 2 and meso scale, respectively. This equals 4.4, 2.8 and 0.29 kg P m(-3) material, respectively. However, the maximum sorption capacities found were 2500, 3887 and 4500 mg P kg(-1) Filtralite-P for the two small-scale box systems and the meso-scale container, respectively. In the full-scale system the overall P sorption capacity of the material was 52 mg P kg(-1) Filtralite-P (0.029 kg P m(-3) Filtralite-P with a maximum sorbed amount of P of 249 mg P kg(-1). Results from both the small- and meso-scale system show that when a constructed wetland (CW) is saturated, i.e. when the outlet concentration has reached its maximum allowed concentration of 1.0 mg P l(-1), only parts of the filter material will have reached the sorption capacity. Sequential extractions of Filtralite-P showed that the loosely bound P, Ca-P and Al-P were the primary P sorption pools both in the small-scale models and in the full-scale CW. However, the proportion of these three fractions varied with time and change in pH. A white product precipitated in the outlet zone of both the small-scale box models as well as the onsite CW. The surface of these precipitation particles was identified by X-ray diffraction and SEM method as CaCO3 and precipitated Ca- and Mg-phosphates.     

Prediction of emerging technologies based on analysis of the US patent citation network

The network of patents connected by citations is an evolving graph, which provides a representation of the innovation process. A patent citing another implies that the cited patent reflects a piece of previously existing knowledge that the citing patent builds upon. A methodology presented here (1) identifies actual clusters of patents: i.e., technological branches, and (2) gives predictions about the temporal changes of the structure of the clusters. A predictor, called the citation vector, is defined for characterizing technological development to show how a patent cited by other patents belongs to various industrial fields. The clustering technique adopted is able to detect the new emerging recombinations, and predicts emerging new technology clusters. The predictive ability of our new method is illustrated on the example of USPTO subcategory 11, Agriculture, Food, Textiles. A cluster of patents is determined based on citation data up to 1991, which shows significant overlap of the class 442 formed at the beginning of 1997. These new tools of predictive analytics could support policy decision making processes in science and technology, and help formulate recommendations for action.     

Monitoring biodegradation of ethene and bioremediation of chlorinated ethenes at a contaminated site using compound-specific isotope analysis (CSIA)

Chlorinated ethenes are commonly found in contaminated groundwater. Remediation strategies focus on transformation processes that will ultimately lead to nontoxic products. A major concern with these strategies is the possibility of incomplete dechlorination and accumulation of toxic daughter products (cis-1,2-dichloroethene (cDCE), vinyl chloride (VC)). Ethene mass balance can be used as a direct indicator to assess the effectiveness of dechlorination. However, the microbial processes that affect ethene are not well characterized and poor mass balance may reflect biotransformation of ethene rather than incomplete dechlorination. Microbial degradation of ethene is commonly observed in aerobic systems but fewer cases have been reported in anaerobic systems. Limited information is available on the isotope enrichment factors associated with these processes. Using compound-specific isotope analysis (CSIA) we determined the enrichment factors associated with microbial degradation of ethene in anaerobic microcosms (ε = -6.7‰ ± 0.4‰, and -4.0‰ ± 0.8‰) from cultures collected from the Twin Lakes wetland area at the Savannah River site in Georgia (United States), and in aerobic microcosms (ε = -3.0‰ ± 0.3‰) from Mycobacterium sp. strain JS60. Under anaerobic and aerobic conditions, CSIA can be used to determine whether biotransformation of ethene is occurring in addition to biodegradation of the chlorinated ethenes. Using δ(13)C values determined for ethene and for chlorinated ethenes at a contaminated field site undergoing bioremediation, this study demonstrates how CSIA of ethene can be used to reduce uncertainty and risk at a site by distinguishing between actual mass balance deficits during reductive dechlorination and apparent lack of mass balance that is related to biotransformation of ethene.