X-ray absorptiometry

Bone mass measurements are essential in the diagnosis of osteoporosis, the monitoring of its progression, and the evaluation of therapeutical responses. Among various methods of bone mass measurements, single- and dual-X-ray absorptiometry, SXA and DXA, have shown excellent fundamental performance. In this paper, the principles of SXA and DXA; i.e., factors of fundamental performance, such as precision, data-acquisition, and radiation dose, the practice of DXA, recent advances in DXA, such as the lateral spine scan, the measurement of body composition, application to BMD measurement of the bones of small animals and at sites of metal implants, morphometry of the spine, and geometrical measurement in the proxial femur, and clinical applications to osteoporosis were particularly reviewed.     

Electroless copper plating using Fe as a reducing agent

Although the electroless plating method is known to be an effective method for obtaining fine wiring in particular, 1 mol hydrogen gas is generated during 1 mol Cu deposition, and voids are generated in the wiring when electroless Cu plating is applied to fine wiring. To avoid the hydrogen evolution, the possibility of performing electroless Cu plating was confirmed using an inexpensive Fe^II compound as a reducing agent. The bath contains CuSO₄, FeSO₄, NaCl, ethylenediamine, sodium citrate, polyethylene glycol (PEG), and 2,2′-bipyridine. Under optimal conditions, over 1.7 μm of copper deposit with a smooth surface was obtained after 3 h of plating, which did not contain iron as an impurity. The electrical resistivity of the copper film is about 3-4 μΩ cm corresponding to that of electroplated copper films.     

Evaluating card-based protocols in terms of execution time

International Journal of Information Security - Card-based cryptography is an attractive and unconventional computation model; it provides secure computing methods using a deck of physical cards....     

Clinical application of single-shot echo-planar diffusion-weighted imaging with compressed SENSE in prostate MRI at 3T: preliminary experience

Magnetic Resonance Materials in Physics, Biology and Medicine - Image quality (IQ) of diffusion-weighted imaging (DWI) with single-shot echo-planar imaging (ssEPI) suffers from low signal-to-noise...     

VO2 nanostructures based chemiresistors for low power energy consumption hydrogen sensing

Mott-type VO₂ oxide nanobelts are demonstrated to be effective hydrogen gas sensors at room temperature. These nanobelts, synthesized by hydrothermal process and exhibiting the VO₂ (A) crystallographic phase, display room temperature H₂ sensitivity as low as 0.17 ppm. The nanobelts (ultralong belt-like) nanostructures could be an ideal system for fully understanding dimensionally confined transport phenomena in functional oxides and for building functional devices based on individual nanobelts.     

Effects of fermentation conditions and soybean peptide supplementation on hyaluronic acid production by Streptococcus thermophilus strain YIT 2084 in milk

To increase the hyaluronic acid (HA) yield from Streptococcus thermophilus YIT 2084, fermentation conditions (pH, temperature, agitation, aeration) were optimized in milk-based medium, and the effects of supplemental soybean peptides, which have different molecular weight distributions, were determined. HA production was enhanced to approximately 100 mg/l at pH 6.8 and 33–40 °C. Agitation speed and aeration rate slightly affected HA production. Soybean peptides including those of high molecular weight (approximately 27 to 130 kDa) further increased HA production to 208 mg/l under the optimal condition (pH 6.8, 35 °C, 100 rpm), which was 20-fold greater than non-optimal condition. HA production was no longer related to the specific growth rate. The HA produced under the optimal condition included a large amount of high-molecular-weight fraction of 100 to 2000 kDa, compared with under the basal condition without optimization.     

Analysis of water in oil-impregnated kraft paper and its effect onconductivity

Oil impregnated paper or polymer film is the main insulating system for many kinds of power apparatus. The oil impregnated materials, especially oil impregnated kraft paper, include a significant amount of water, and this water disturbs the insulating performance of the devices. The amount of water in the materials usually is represented by the difference in weight between the normal material and the same material after drying. However it is difficult to measure the absolute value of the water content and to determine the state in which the water exists in the materials. In this study, we examined the IR spectra of water in oil impregnated kraft paper, because the IR spectrum of the water indicates not only the amount of water but also its state. It was found that most of the water behaves as liquid water, and some as hydrogen bonded water, interacting with the paper fiber. The dc conductivity of the kraft paper depends only on the amount and state of the water associated with it whether or not the paper is impregnated with the oil     

State of water in hydrocarbon liquids and its effect onconductivity [transformer oil]

The humidity or the dissolved water in insulating oils influences conduction and breakdown phenomena. The corrections between the amount of dissolved water and the electrical properties have been investigated. However, the effect of water has been based only on the total amount of water because in the past there was no way to observe the state of water in oil in an electrical field. With the availability of Fourier transform infrared (FTIR) spectroscopy to characterize water clusters, the effect of water in transformer oil can be reassessed based not only on the amount of water, but also on the state of water. In this paper, IR spectra of water in several liquid hydrocarbons and conduction current were measured at the same time. The selection of the liquid hydrocarbons was made on the basis of the degree of polarizability of the liquids. Because the water molecules combine with the polar structures by hydrogen bonding, the state of water depends on the polarizability of the oil. As a result, there is a difference in conduction phenomena depending on whether water is free or combined with the polar structure of the liquid     

A novel gene delivery system in plants with calcium alginate micro-beads

We have produced micrometer-sized calcium alginate beads referred to as "bio-beads" that encapsulate plasmid DNA molecules carrying a reporter gene. In order to evaluate the efficiency of the bio-beads in mediating genetic transfection, protoplasts isolated from cultured tobacco cells (BY-2) were transfected with bio-beads containing a plasmid that carries the modified green fluorescent protein gene CaMV35S-sGFP. With the bio-beads treatment, approximately ten-fold higher GFP expression was observed after 24 h incubation compared to that with the conventional method using a naked plasmid solution. Transfection was up to 0.22% efficient. These results indicate that bio-beads have a possibility for efficient transformation in plants.     

Moisturizing effect of vesicles formed from monoglycerides on human skin

The moisturizing effect of vesicles formed from monoglycerides on human skin was studied by measurement of conductance on and transepidermal waterloss from the skin surface. Although sonication of the monoglycerides in water with Ca2+ gave multilamellar vesicles, the lamellar structure of the vesicles disappeared during their storage without any other additive. With the addition of poly(vinylpyrrolidone) after the sonication, the stability of the vesicles increased and their lamellar structure was maintained for 3 months at 40 degrees C. These vesicles led to a significantly higher water content of the stratum corneum of human skin compared with non-lamellar monoglyceride, and consequently they improved rough human skin.