NIR-Laser Triggered Drug Release from Molybdenum Disulfide Nanosheets Modified with Thermosensitive Polymer for Prostate Cancer Treatment

Journal of Inorganic and Organometallic Polymers and Materials - In the present study, the thermosensitive polymers were successfully grown on the surface of molybdenum disulfide nanosheets (MNs)...     

Optimizing PSMA Radioligand Therapy for Patients with Metastatic Castration-Resistant Prostate Cancer. A Systematic Review and Meta-Analysis

The aim of the review was to evaluate patient and treatment characteristics for patients with metastatic castration-resistant prostate cancer (mCRPC) treated with PSMA radioligand therapy (PRLT) associated with above-average outcome. The systematic review and meta-analysis followed recommendations by the Preferred Reporting Items for Systematic reviews and Meta-Analysis (PRISMA). We searched for publications in PubMed, Embase, and ClinicalTrials.gov up to 31 September 2020. Thirty-six publications and four duplicates reported 2346 patients. Nearly two-thirds of the patients had bone metastases. Median overall survival (OS) was 16 months. Asymptomatic patients and patients with only lymph node metastases lived longer than symptomatic patients and patients with more extensive metastases. Patients treated with an intensified schedule of ¹⁷⁷Lu PRLT lived longer than those treated with a conventional schedule. Half of the patients obtained a PSA decline ≥ 50% and these patients lived longer than those with less PSA decline. Approximately 10% of the patients developed hematologic toxicity with anemia grade 3 as the most severe adverse effect. Characteristics for patients, cancer, restaging, and PRLT predict above average overall survival following treatment with PRLT.     

Effect of nonionic side chain length of polycarboxylate-ether-based high-range water-reducing admixture on properties of cementitious systems

Despite the large variations in the behaviors of water-reducing admixtures upon changes in their structures, most previous reports on the cement-admixture compatibility did not provide sufficient information on the structure of the admixture. Hence, the evaluation and generalization of the reports on the cement-admixture compatibility are challenging. In this study, three different polycarboxylate-ether-based water-reducing admixtures with the same free nonionic content, anionic/nonionic molar ratio, and main chain length and different side chain lengths were produced. The compatibility of these admixtures with a CEM I 42.5R-type cement was investigated. In addition, an analysis of variance was performed on the experiment results to evaluate the contributions of the admixture type, admixture/cement ratio, and elapsing time to the Marsh funnel flow time, mini-slump, slump flow, and compressive strength. The water-reducing admixtures having long or short side chains reduced the initial flow characteristics of the cementitious systems. However, the admixture having the shortest side chain was better with regard to flow retention. The side chain length of the admixture did not have significant effects on the compressive strength and water absorption capacity of the mortar mixtures and mini-slump performances of the cement paste mixtures. Regarding the behaviors of the admixtures in the cementitious systems, an optimal admixture side chain molecular weight is proposed.     

Attitude of Iranian physicians and nurses toward a clinical decision support system for pulmonary embolism and deep vein thrombosis

This research project sought to design and implement a computerized clinical decision support system (CDSS) that was able to identify patients who were at risk of pulmonary embolism (PE) and deep vein thrombosis (DVT), as well as produce reminders for prophylactic action for these diseases. The main purpose of the CDSS was to attempt to reduce the morbidity and mortality caused by embolism and thrombosis in patients admitted to hospitals. After implementation of this system in one of the large educational hospitals of Iran, a standard questionnaire was used, and interviews were conducted with physicians and nurses to evaluate the performance of the designed system for reducing the incidence of pulmonary embolism and thrombosis. From physicians and nurses’ point of view, a system which assists the medical staff in making better decisions regarding patient care, and also reminds pulmonary embolism and thrombosis preventive procedures with timely warnings, can influence patient care quality improvement and lead to the improved performance of the medical staff in preventing the incidence of pulmonary embolism and thrombosis.     

High temperature stability of platinum nanoparticles on few-layer graphene investigated by In Situ high resolution transmission electron microscopy

eterogeneous catalytic reactions involve the use of highly dispersed active phases such as metal, metal oxide, or metal sulphide nanoparticles on thermally stable supports. Fluctuations of the reaction temperature during the reactions can induce sintering of the particles. The stability of such small particles represents a crucial parameter in the development of new families of catalysts with high activity in many fields. Here we report the stability of platinum nanoparticles (2–3 nm) on a few-layer graphene (FLG) surface as studied by in situ high temperature transmission electron microscopy.     

Suicidality as a function of impulsivity, callous–unemotional traits, and depressive symptoms in youth.

Suicidality represents one of the most important areas of risk for adolescents, with both internalizing (e.g., depression, anxiety) and externalizing–antisocial (e.g., substance use, conduct) disorders conferring risk for suicidal ideation and attempts (e.g., Bridge, Goldstein, & Brent, 2006). However, no study has attended to gender differences in relationships between suicidality and different facets of psychopathic tendencies in youth. Further, very little research has focused on disentangling the multiple manifestations of suicide risk in the same study, including behaviors (suicide attempts with intent to die, self-injurious behavior) and general suicide risk marked by suicidal ideation and plans. To better understand these relationships, we recruited 184 adolescents from the community and in treatment. As predicted, psychopathic traits and depressive symptoms in youth showed differential associations with components of suicidality. Specifically, impulsive traits uniquely contributed to suicide attempts and self-injurious behaviors, above the influence of depression. Indeed, once psychopathic tendencies were entered in the model, depressive symptoms only explained general suicide risk marked by ideation or plans but not behaviors. Further, callous–unemotional traits conferred protection from suicide attempts selectively in girls. These findings have important implications for developing integrative models that incorporate differential relationships between (a) depressed mood and (b) personality risk factors (i.e., impulsivity and callous–unemotional traits) for suicidality in youth. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Reuse of waste sludge from papermaking process in cement composites

Papermaking sludge (PS), a waste residue from the pulp and paper processing, has brought great pressure on the environment because of large quantities that are produced in paper mills. This work was carried out to explore the possibility of making PS/cement composite products using solid waste of PS. Boards measuring 350 × 270 × 12 mm³ were manufactured using PS contents of 40, 50, and 60 wt%, adhesive dosages of 0, 10, and 15 wt%, and 0 and 5 wt% of calcium chloride as an accelerator. At least three replications were fabricated for each treatment, and some mechanical and physical properties of the boards were evaluated. Test results showed that the bending and internal strengths of the specimens decreased with an increase in the PS content, and the maximum values were obtained at PS loading of 40 wt%. The negative influence of PS content on the mechanical properties can be explained by the reduced bonding ability because of weaker PS compared with cement. Screw withdrawal values were up to 22.7 kPa. Water absorption and thickness swelling of cement mortar considerably increased with increased content of PS, with a corresponding reduction of bulk density. In general, all properties of the boards were improved when the adhesive and calcium chloride contents were increased. The results showed that an increase in board density improved the mechanical and physical properties. Finally, results showed that PS has good potential for recycling and utilization in developing value‐added building components. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Designing scalable product families by the radial basis function–high-dimensional model representation metamodelling technique

Product family design is cost-efficient for achieving the best trade-off between commonalization and diversification. However, for computationally intensive design functions which are viewed as black boxes, the family design would be challenging. A two-stage platform configuration method with generalized commonality is proposed for a scale-based family with unknown platform configuration. Unconventional sensitivity analysis and information on variation in the individual variants’ optimal design are used for platform configuration design. Metamodelling is employed to provide the sensitivity and variable correlation information, leading to significant savings in function calls. A family of universal electric motors is designed for product performance and the efficiency of this method is studied. The impact of the employed parameters is also analysed. Then, the proposed method is modified for obtaining higher commonality. The proposed method is shown to yield design solutions with better objective function values, allowable performance loss and higher commonality than the previously developed methods in the literature.