ZnO·2.7Al2O3 nanocomposite with high optical transparency

Here we report a transparent dual-phase ZnO·2.7Al₂O₃ ceramic. The composite is pore-free and consists of thin nanosheets with a spinel phase and a hexagonal phase, while the two phases match closely in both lattice and refractive index. Such features result in excellent optical transmittance (maximum value >80% in the visible spectrum) at comparable phase volume. This work may provide a new thought for the rational structural design of optical nanocomposites.     

Effects of environmental factors on corrosion behavior of aluminum

Aluminum, used as a material for heat exchangers in air conditioners, often has problems of leakage of refrigerant on the Al surface due to corrosion. The problems originate from pitting corrosion of the Al in an external environment. To understand corrosion problems, it is necessary to study the corrosion behavior of Al in various environments. In this study, the effects of environmental factors on the corrosion behavior of Al were studied by the surface analysis and electrochemical testing in 3.5 wt% NaCl solutions, with changes of dissolved oxygen, temperature, and concentration of Cl⁻ and S ions. Among the external environmental factors, the presence of oxygen and the increase of Cl⁻ ion concentration do not significantly affect the corrosion potential of Al, leading to an increase of only 1.1 and 6 times, respectively. There was a significant decrease in the corrosion resistance of Al, approximately 40 and 800 times, respectively, with the increase of concentration of S and temperature.     

Preparation,structure and microwave dielectric properties of novel La2MgGeO6 ceramics with hexagonal structure and adjustment of its τf value

A novel La₂MgGeO₆ ceramic was synthesized through a solid-state reaction process within a sintering temperature range of 1450–1550 °C. By a combination of X-ray diffraction and Rietveld refinement analyses, the ceramics were found to have a pure hexagonal phase structure belonging to space group R3/146. The scanning electron microscopy images revealed that the ceramic grains were closely connected. The effects of internal (lattice energy, valence bond, and fraction packing) and external factors (density) on the microwave properties of ceramics were also studied. The ceramic exhibited excellent microwave dielectric performances, with a relative permittivity (?_r) of 21.2, a quality factor (Q × f) of 52 360 GHz, and a temperature coefficient of resonant frequency (τ_f) of ?44.2 ppm/°C, when sintered at 1500 °C for 4 h. The τ_f value of the La₂MgGeO₆ ceramic doped with CaTiO₃ could be adjusted to zero. Particularly, 0.2La₂MgGeO₆-0.8CaTiO₃ ceramics have good microwave dielectric properties with τ_f = +2.1 ppm/°C, Q × f = 15 610 GHz, and ?_r = 40.3.     

Gradient-based adaptive modeling for IoT data transmission reduction

Wireless Networks - Spatial and temporal correlation between sensor observations in an Internet of Things environment can be exploited to eliminate unnecessary transmissions. Transmitting less data...     

Mn在2297铝锂合金中的微合金化作用

利用金相显微镜、拉伸测试、SEM、TEM、STEM-HAADF等手段研究了微量Mn的添加对2297铝锂合金微观组织与力学性能的影响。结果表明,Mn在2297铝锂合金中主要以AlCuMn棒状弥散粒子和Al(CuMnFe)粗大相形式存在,并且相比Mn-free合金,2297合金中粗大相尺寸较小、分布均匀,因而合金的抗拉强度得到提高。研究表明,Mn的添加没有影响Al_3Zr粒子的析出行为,尽管析出了AlCuMn棒状弥散相,但整体上没有改变2297合金的再结晶程度。     

Simultaneous determination of synthetic food additives in kimchi by liquid chromatography-electrospray tandem mass spectrometry

Food Science and Biotechnology - A new analytical method was developed for the simultaneous determination of seven food additives (Ponceau 4R, Allura Red AC, Amaranth, 4-hydroxymethyl benzoic acid,...     

Extensive evaluation and classification of low-cost dust sensors in laboratory using a newly developed test method

An extensive evaluation of low-cost dust sensors was performed using an exponentially decaying particle concentration. A total of 264 sensors including 27 sensors with light-emitting diodes (LEDs) and 237 sensors with laser lighting sources were tested. Those tested sensors were classified into 4 groups based on the deviation from the reference data obtained by a reference instrument. The response linearities of all the tested samples for PM₁, PM_2.5, and PM₁₀ were in excellent agreement with the reference instrument, except a few samples. For the measurements of PM₁ and PM_2.5, the lighting source, that is, LED or laser, did not show any significant difference in overall sensor performance. However, LED-based sensors did not perform well for PM₁₀ measurements. The 32, 24, and 16% of all the tested sensors for PM₁, PM_2.5, and PM₁₀ measurement, respectively, are in the category of Class 1 (reference instrument reading ± 20%) requirement. The performance of the low-cost dust sensors for PM₁₀ measurement was relatively less satisfactory.