Microwave power amplifiers for space systems

This paper addresses both solid state power amplifiers (sspas) and travelling wave tube amplifiers (twtas), highlighting their capabilities, drawbacks and future developments, for space systems. These two technologies are complementary and will coexist in future pay loads.     

Rheumatoid nodules: MR/pathological correlation

A 62-year-old female who had a complaint of palpitation was diagnosed as bicuspid aortic stenosis and left single coronary artery by the echocardiographic examination, cardiac catheterization study and coronary artery angiography. Aortic valve replacement was performed and the patient was discharged 22 days after surgery with good post-operative course. Preoperative coronary artery angiography was important in the case of aortic valvular disease.     

Cobalt doped glass for the fabrication of percolated glass–alumina functionally graded materials

The present research was focused on the development of a new glass to produce glass–alumina FGMs. The glass formulation, belonging to the CaO–ZrO₂–SiO₂ system, was doped with cobalt, by adding a small molar percentage (about 0.1 mol%) of CoO, in order to obtain a blue glass, which could be useful to appreciate the final compositional gradient. The glass was accurately characterized, evaluating its thermal behaviour, its mechanical properties, and its attitude to crystallize during a thermal treatment. Subsequently, the glass was used to produce glass–alumina FGMs via percolation and the so obtained specimens were analysed in order to evaluate the effect of the glass infiltration. The possible development of new crystal phases, in particular, was tested via micro X-ray diffraction and the elastic properties gradient associated with the compositional gradient was measured via depth-sensing Vickers microindentation.     

Influence of Al2O3 addition on thermal and structural properties of erbium doped glasses

Changes in the structural properties of Er³⁺ doped soda-lime silicate glasses were investigated as a function of Al₂O₃ content. A combined approach of experimental techniques and molecular dynamic simulations (MD) was used to evaluate the structural features directly correlated to the glass properties. The experimental results in term of density, thermal properties as well as microstructural and mineralogical data showed a significant variation when increasing the alumina content from 10 mol% to 15 mol%. These results were compared to the MD information and discussed: changes in erbium and aluminium local configuration, due to the glass structural evolution as a function of the alumina concentration, have been investigated.     

An exploratory study of the impact of antipatterns on class change- and fault-proneness

Antipatterns are poor design choices that are conjectured to make object-oriented systems harder to maintain. We investigate the impact of antipatterns on classes in object-oriented systems by studying the relation between the presence of antipatterns and the change- and fault-proneness of the classes. We detect 13 antipatterns in 54 releases of ArgoUML, Eclipse, Mylyn, and Rhino, and analyse (1) to what extent classes participating in antipatterns have higher odds to change or to be subject to fault-fixing than other classes, (2) to what extent these odds (if higher) are due to the sizes of the classes or to the presence of antipatterns, and (3) what kinds of changes affect classes participating in antipatterns. We show that, in almost all releases of the four systems, classes participating in antipatterns are more change-and fault-prone than others. We also show that size alone cannot explain the higher odds of classes with antipatterns to underwent a (fault-fixing) change than other classes. Finally, we show that structural changes affect more classes with antipatterns than others. We provide qualitative explanations of the increase of change- and fault-proneness in classes participating in antipatterns using release notes and bug reports. The obtained results justify a posteriori previous work on the specification and detection of antipatterns and could help to better focus quality assurance and testing activities.     

Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

Production of antimicrobially active silk proteins by use of metal‐containing dyestuffs

The work presented here discusses a new technique for preparing silk fibers and films with persistent antimicrobial activity through use of metallic dyestuffs during the fiber dyeing process. The length of the silk fibers investigated contracted when the fibers were immersed in concentrated neutral salt solutions, such as calcium or potassium nitrate, at elevated temperature levels. The birefringence and molecular orientation of the silk fibroin molecules became less ordered by the action of the neutral salt solutions, resulting in increased dyestuff absorption. Subsequently, contracted silk fibers were dyed with metallic dyestuffs containing Cr or Cu for the purpose of obtaining silk fibers with antimicrobial activity. Silk fibers dyed with metallic dyestuffs showed significant antimicrobial activity against the plant pathogen Cornebacterium and the human pathogen Coli bacillus. Tensile strength of the silk fibers after the salt shrinking and dyeing processes did not show a significant change, whereas the elongation at break was increased slightly. The techniques described here for preparing significantly active antimicrobial silk fibers are effective and economic ways of providing new materials for industrial and biomedical applications. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1181–1188, 2002     

Physical properties of silk fibers treated with ethylene glycol diglycidyl ether by the pad/batch method

This paper deals with the epoxide treatment of silk fabrics by the pad/batch method. The optimum reaction conditions, i.e., NaOH concentration, and reaction temperature were 2.5 g/L and 30°C, respectively. A weight gain of 8.5% was attained at a reaction time of 6 h. This value slightly increased to 10% after 24 h. The reactivity of tyrosine and basic amino acid residues was dependent on the reaction time and did not significantly differ from the results of epoxide-treated silk fiber by the conventional method in tetrachloroethylene. The moisture regain slightly decreased at 4% weight gain and then increased with the epoxide content, exceeding the value of the untreated control. The crease recovery of the epoxide-treated silk fabrics measured in the wet state was significantly improved, whereas that in the dry state was almost unchanged. The rate of photoyellowing of the epoxide-treated silk fabrics by the pad/batch method was reduced significantly compared with that of the untreated control. Among the mechanical properties, elongation at break and tensile modulus remained unchanged, whereas the tensile strength slightly increased following the epoxide reaction. The thermal properties were evaluated by DSC and TGA and on the basis of the dynamic viscoelastic measurements. The DSC curve of the epoxide-treated sample showed a slight increase of the decomposition temperature of silk fibroin. The rate of weight loss determined by TGA remained unchanged regardless of the chemical modification, whereas the peak of loss modulus became broader and shifted to lower temperature. The X-ray diffractograms showed that the crystalline structure of silk fibers was not affected by the reaction with epoxides. © 1993 John Wiley & Sons, Inc.     

Processing of a Silicon-Carbide-Whisker-Reinforced Glass-Ceramic Composite by Microwave Heating

A calcium magnesium aluminosilicate-based glass that contained 10 wt% of silicon carbide whiskers (SiC _w ) as reinforcement was prepared by tape casting, followed by sintering either in a conventional furnace or in a microwave oven. The results were consistent with retardation of glass sintering through whisker bridging. The glass, by itself, was sintered to almost-full density at 750°C for 4 h by conventional furnace sintering; the best sintered composite, with an estimated density of ∼90%, was obtained at 800°C with a dwell time of 4 h. Sintering at a temperature of >800°C did not improve the densification but rather resulted in severe whisker oxidation. A reduced densification rate was observed for the samples that were sintered in nitrogen. By contrast, in the microwave oven, almost-full density for the glass and ∼95% of the theoretical density for the composite were obtainable at 850°C for 15 min, which represented a reduction of ∼10 h of the total processing time and a reduced SiC _w oxidation.     

An exploratory study of api changes and usages based on apache and eclipse ecosystems

Frameworks are widely used in modern software development to reduce development costs. They are accessed through their Application Programming Interfaces (APIs), which specify the contracts with client programs. When frameworks evolve, API backward-compatibility cannot always be guaranteed and client programs must upgrade to use the new releases. Because framework upgrades are not cost-free, observing API changes and usages together at fine-grained levels is necessary to help developers understand, assess, and forecast the cost of each framework upgrade. Whereas previous work studied API changes in frameworks and API usages in client programs separately, we analyse and classify API changes and usages together in 22 framework releases from the Apache and Eclipse ecosystems and their client programs. We find that (1) missing classes and methods happen more often in frameworks and affect client programs more often than the other API change types do, (2) missing interfaces occur rarely in frameworks but affect client programs often, (3) framework APIs are used on average in 35 % of client classes and interfaces, (4) most of such usages could be encapsulated locally and reduced in number, and (5) about 11 % of APIs usages could cause ripple effects in client programs when these APIs change. Based on these findings, we provide suggestions for developers and researchers to reduce the impact of API evolution through language mechanisms and design strategies.