The Age-Sensitive Efficacy of Calorie Restriction on Mitochondrial Biogenesis and mtDNA Damage in Rat Liver

Calorie restriction (CR) is the most efficacious treatment to delay the onset of age-related changes such as mitochondrial dysfunction. However, the sensitivity of mitochondrial markers to CR and the age-related boundaries of CR efficacy are not fully elucidated. We used liver samples from ad libitum-fed (AL) rats divided in: 18-month-old (AL-18), 28-month-old (AL-28), and 32-month-old (AL-32) groups, and from CR-treated (CR) 28-month-old (CR-28) and 32-month-old (CR-32) counterparts to assay the effect of CR on several mitochondrial markers. The age-related decreases in citrate synthase activity, in TFAM, MFN2, and DRP1 protein amounts and in the mtDNA content in the AL-28 group were prevented in CR-28 counterparts. Accordingly, CR reduced oxidative mtDNA damage assessed through the incidence of oxidized purines at specific mtDNA regions in CR-28 animals. These findings support the anti-aging effect of CR up to 28 months. Conversely, the protein amounts of LonP1, Cyt c, OGG1, and APE1 and the 4.8 Kb mtDNA deletion content were not affected in CR-28 rats. The absence of significant differences between the AL-32 values and the CR-32 counterparts suggests an age-related boundary of CR efficacy at this age. However, this only partially curtails the CR benefits in counteracting the generalized aging decline and the related mitochondrial involvement.     

Physicochemical and technological properties of beef burger as influenced by the addition of pea fibre

This study aimed to evaluate the physicochemical characteristics and sensory attributes of beef burgers with the addition of pea fibre as a partial substitute of meat or fat. Three formulations were prepared: control (CON) – similar to the commercial formulation; fibre/less meat (FLM)—5% meat reduction and addition of 1% pea fibre; fibre/less fat (FLF)—7% fat reduction and addition of 1% pea fibre. Non-significant differences were obtained for pH, colour parameters (L* and b*), texture profile, cooking loss and size reduction among formulations. Moreover, sensory analysis with consumers of beef burgers did not indicate differences among the formulations for all the analysed attributes. Therefore, pea fibre is a promising partial replacer for meat and fat in beef burgers due to the preservation of technological parameters and sensory acceptance.     

Tribocorrosion and corrosion behavior of stainless steel coated with DLC films in ethanol with different concentrations of water

There has been a recent increase in both the production and consumption of ethanol due to the numerous environmental advantages that it offers, such as the fact that it can be produced from a variety of renewable materials, for instance corn and cellulose, or it can be obtained from sugarcane bagasse and biomass (2nd and 3rd generation ethanol). The result of this is that nowadays ethanol is widely seen as the dominant biofuel – or as a blend component in gasoline or pure fuel - in many countries.However, one disadvantage of the use of ethanol is the high corrosive behavior that occurs when its hygroscopic properties are exposed to a large number of materials. Xiaoyuan Lou and Preet Singh showed that the increase of water concentration in ethanol induces pitting and metal loss. Diamond-Like Carbon (DLC) films may be a solution to this problem due to the fact that they can be deposited inside tubes, offer good protection levels against corrosion, and reduce the friction coefficient and wear.This paper shows the tribocorrosion and corrosion studies of DLC films deposited on stainless steel grade 304 (SS304) substrates in order to gauge its appropriateness usage in the construction of pipelines and fuel storage tanks. The surface morphology was analyzed before and after 14 days of immersion. The tribocorrosion, friction coefficient, and wear rate were studied in ethanol to see the effects of water concentration. The films showed good adherence to the substrates. Corrosion and tribocorrosion results showed that for bare Stainless Steel 304 the increase of the water content increases the corrosion and the friction coefficient. DLC coated samples presented few points of delamination, and the friction coefficient and open circuit potentials were very low compared with the bare sample which was water concentration independent.     

Bioactive Phytochemicals from Wild Arbutus unedo L. Berries from Different Locations in Portugal: Quantification of Lipophilic Components

The lipophilic composition of wild Arbutus unedo L. berries, collected from six locations in Penacova (center of Portugal), as well as some general chemical parameters, namely total soluble solids, pH, titratable acidity, total phenolic content and antioxidant activity was studied in detail to better understand its potential as a source of bioactive compounds. The chemical composition of the lipophilic extracts, focused on the fatty acids, triterpenoids, sterols, long chain aliphatic alcohols and tocopherols, was investigated by gas chromatography–mass spectrometry (GC–MS) analysis of the dichloromethane extracts. The lipophilic extractives of the ripe A. unedo berries ranged from 0.72% to 1.66% (w/w of dry weight), and consisted mainly of triterpenoids, fatty acids and sterols. Minor amounts of long chain aliphatic alcohols and tocopherols were also identified. Forty-one compounds were identified and among these, ursolic acid, lupeol, α-amyrin, linoleic and α-linolenic acids, and β-sitosterol were highlighted as the major components. To the best of our knowledge the current research study provides the most detailed phytochemical repository for the lipophilic composition of A. unedo, and offers valuable information for future valuation and exploitation of these berries.     

Interface engineering of nanoceramic hematite photoelectrode for solar energy conversion

This work addresses the role of different modifiers on the overall photocurrent response, which allowed a dual material insertion, increasing the charge separation without compromise the surface catalysis. Sn-addition onto nanoceramic hematite photoelectrodes clearly increased flat band potential, promoting a good charge separation, and shifting the onset to a higher potential, attributed to the surface-trapping state created by this modification. Notoriously, Sn-hematite photoelectrodes loaded with NiFeO_x exhibited the highest photocurrent density, suggesting a partially recovered surface-trapping states created during the electrode designing. The well-known cocatalyst acted in the overall photoelectrocatalytic response with no significant effect on the turn-on voltage, in other words, with minor effect related to catalytic efficiency. The dual modification contributes to understand the role of different modifiers allowing to satisfactorily improve charge separation while maintaining the conductivity attributed to IV-group ions.     

In-plane cyclic behaviour of a new reinforced masonry system: Experimental results

This paper describes the behaviour under cyclic shear compression of an innovative reinforced masonry system, composed of horizontally perforated units, having common steel bars or prefabricated trusses as horizontal reinforcement. At the wall edges or crossings, confining columns for vertical reinforcement are built with vertically perforated units. Experimental tests to obtain information on the in-plane cyclic behaviour of the construction system were performed on masonry panels made of horizontally perforated units and on completed reinforced masonry walls. Tests on the entire system were repeated for two wall aspect ratios and two vertical stress levels, in order to force shear type and flexural behaviour. In particular, this paper presents: (a) results of shear compression tests in terms of strength, ductility parameters, energy dissipation, viscous damping and stiffness degradation, (b) strains and the effectiveness of reinforcement, (c) the influence of various parameters such as axial load, aspect ratio, and reinforcement type on the behaviour of the reinforced masonry walls, and (d) comparison of walls built with and without vertical reinforcement.     

Air-Drying of Seeds: A Review

Beginning with harvesting, seeds are usually subjected to a series of processes which include drying for immediate or future use. Seed quality can be influenced by several factors during drying. This article presents a review of the seed air-drying process, including mathematical models based on differential equations derived from mass and energy balances for seeds and air in fixed and moving bed dryers. The article concludes with an overview of several potential drying technologies that can be applied to seeds.     

Building a bridge between performance management,radical innovation,and innovation networks: A systematic literature review

Research on performance management (PM) of networks and radical innovation has largely developed along two isolated paths. On the one hand, a growing body of knowledge addresses the use of performance management systems in the context of networks (notably for production and incremental innovation). On the other hand, radical innovation scholars have shown how innovation initiatives that are more uncertain demand the use of new approaches (e.g., new project management routines or different evaluative tools for portfolios). Some scholars even suggest that traditional PM may suppress radical innovation. Our study takes a different approach. It aims to bridge radical innovation and network performance management through a systematic review of the literature. Here, we adopt a hybrid approach that combines bibliometrics with content analysis. Whereas the literature often separates the issues of network performance management and radical innovation, our contribution expands the theory of network management and radical innovation by developing a conceptual framework based on these concepts, thus combining them. We also offer suggestions for further research on this approach. Our framework suggests that overall, the performance management of radical innovation networks presents different features (e.g., recursive rather than linear) and constructs (e.g., openness and unintended performance) from those of innovation network management.     

A two-way coupled multiscale model for predicting damage-associated performance of asphaltic roadways

This paper presents a quasi-static multiscale computational model with its verification and rational applications to mechanical behavior predictions of asphaltic roadways that are subject to viscoelastic deformation and fracture damage. The multiscale model is based on continuum thermo-mechanics and is implemented using a finite element formulation. Two length scales (global and local) are two-way coupled in the model framework by linking a homogenized global scale to a heterogeneous local scale representative volume element. With the unique multiscaling and the use of the finite element technique, it is possible to take into account the effect of material heterogeneity, viscoelasticity, and anisotropic damage accumulation in the small scale on the overall performance of larger scale structures. Along with the theoretical model formulation, two example problems are shown: one to verify the model and its computational benefits through comparisons with analytical solutions and single-scale simulation results, and the other to demonstrate the applicability of the approach to model general roadway structures where material viscoelasticity and cohesive zone fracture are involved.     

Silica nanoparticles functionalized with a thermochromic dye for textile applications

The aim of this work was the fabrication of mesoporous silica nanoparticles functionalized with thermochromic dye for further incorporation onto textiles. The nanosilicas were prepared under alkaline conditions in the presence of the surfactant hexadecyltrimethylammonium chloride and functionalized with the organosilane dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (C18-NTMS). The dye was incorporated onto the mesoporous silica nanoparticles by two different methods: co-condensation and post-grafting, i.e. by adding the dye during or after the synthesis of the nanosilica, respectively. The morphology, particle and pore size, chemical composition, and textural properties of the silica nanoparticles were characterized by scanning electron microscopy (SEM), dynamic light scattering, N₂ adsorption isotherms at ?196 °C, Fourier transform infrared spectroscopy and thermogravimetry. The silica nanoparticles prepared with and without dye presented spherical shape (by SEM) and particle size ranging from 15 to 40 nm. The infrared spectra revealed the characteristic bands of silica and organosilane (in the cases where it was used). The prepared materials presented colour change when submitted to different conditions. The thermochromic dye-functionalized nanosilicas were efficiently immobilized into cotton fabric and tests were performed to verify the washing fastness. After washing, a slight decrease on the amount of silica was noticed, but much of it remained on the textile. The functionalized textiles presented a colour change within different conditions.