Context-Based Path Prediction for Targets with Switching Dynamics

International Journal of Computer Vision - Anticipating future situations from streaming sensor data is a key perception challenge for mobile robotics and automated vehicles. We address the problem...     

Lignin from Annual Plants as Raw Material Source for Flavors and Basic Chemicals

The enzymatic conversion of lignins, possibly in combination with electrochemical oxidation, makes aromatics such as syringol, guaiacol, vanillin and catechol available in the qualities required by the fragrance industry. The lignins were obtained by soda digestion from wheat straw and Miscanthus, characterized and then converted with laccases. The overall yield amounted up to 9 wt % with a product spectrum confined to four substances. Catechol was the major product, with a fraction of ≈75 %. It can easily be isolated by extraction with acetone.     

Influence of the Temperature on Coccolith-Containing Systems from Emiliania huxleyi Cultivations

Thermogravimetric analysis of a coccolith-containing biogenic broth showed a three-step degradation process. According to this system behavior, the biogenic broth was heated to specific temperatures and characterized in terms of its morphology, surface chemistry, and crystallinity. The elemental and organic composition of the treated samples was also evaluated and compared to the reference material. The presented results were acquired in an effort to exploit pretreatment scenarios for such a biogenic system that would improve and support a separation process.     

From dust till drawn

We present a system for drawing pastel media in real-time as an effective alternative to most existing digital solutions that basically allow for drawing arbitrary strokes in a particular style. Our approach is focused on the simulation of the natural material itself and on its interaction with the drawing surface and the drawing tool. Upon free-form drawing, a bidirectional transfer of pigment takes place. In one direction, the paper surface is dusted with new pigment particles broken off the tip (i.e., the end of the drawing tool). A large part of these particles will be deposited or blended together with previously deposited ones whereas the remainder does not contribute to the drawing and is blown off. On the other hand, a certain amount of previously deposited pigment is scraped off and picked up again soiling the tip. This is noticeable in the next strokes to be drawn. Furthermore, both the tip and the paper surface are subject to weathering depending on the exerted pressure and friction of the drawing tool, and the bumpiness of the paper. As a result, the paper surface becomes slightly damaged, limiting the deposition of new pigment. The tip, on the other hand, becomes blunt making new strokes wider. From a stylistic point of view, similarly to traditional drawings our results convey the artists’ characteristics (e.g., the way of wielding the brush, skillfulness, feeling for the medium). Therefore, we believe that our system allows an artist to create realistically looking pastel images without losing his/her personal touch.     

Out-of-Field Hippocampus from Partial-Body Irradiated Mice Displays Changes in Multi-Omics Profile and Defects in Neurogenesis

The brain undergoes ionizing radiation exposure in many clinical situations, particularly during radiotherapy for brain tumors. The critical role of the hippocampus in the pathogenesis of radiation-induced neurocognitive dysfunction is well recognized. The goal of this study is to test the potential contribution of non-targeted effects in the detrimental response of the hippocampus to irradiation and to elucidate the mechanisms involved. C57Bl/6 mice were whole body (WBI) or partial body (PBI) irradiated with 0.1 or 2.0 Gy of X-rays or sham irradiated. PBI consisted of the exposure of the lower third of the mouse body, whilst the upper two thirds were shielded. Hippocampi were collected 15 days or 6 months post-irradiation and a multi-omics approach was adopted to assess the molecular changes in non-coding RNAs, proteins and metabolic levels, as well as histological changes in the rate of hippocampal neurogenesis. Notably, at 2.0 Gy the pattern of early molecular and histopathological changes induced in the hippocampus at 15 days following PBI were similar in quality and quantity to the effects induced by WBI, thus providing a proof of principle of the existence of out-of-target radiation response in the hippocampus of conventional mice. We detected major alterations in DAG/IP3 and TGF-β signaling pathways as well as in the expression of proteins involved in the regulation of long-term neuronal synaptic plasticity and synapse organization, coupled with defects in neural stem cells self-renewal in the hippocampal dentate gyrus. However, compared to the persistence of the WBI effects, most of the PBI effects were only transient and tended to decrease at 6 months post-irradiation, indicating important mechanistic difference. On the contrary, at low dose we identified a progressive accumulation of molecular defects that tended to manifest at later post-irradiation times. These data, indicating that both targeted and non-targeted radiation effects might contribute to the pathogenesis of hippocampal radiation-damage, have general implications for human health.     

Solubility and Aggregation of Selected Proteins Interpreted on the Basis of Hydrophobicity Distribution

Protein solubility is based on the compatibility of the specific protein surface with the polar aquatic environment. The exposure of polar residues to the protein surface promotes the protein’s solubility in the polar environment. The aquatic environment also influences the folding process by favoring the centralization of hydrophobic residues with the simultaneous exposure to polar residues. The degree of compatibility of the residue distribution, with the model of the concentration of hydrophobic residues in the center of the molecule, with the simultaneous exposure of polar residues is determined by the sequence of amino acids in the chain. The fuzzy oil drop model enables the quantification of the degree of compatibility of the hydrophobicity distribution observed in the protein to a form fully consistent with the Gaussian 3D function, which expresses an idealized distribution that meets the preferences of the polar water environment. The varied degrees of compatibility of the distribution observed with the idealized one allow the prediction of preferences to interactions with molecules of different polarity, including water molecules in particular. This paper analyzes a set of proteins with different levels of hydrophobicity distribution in the context of the solubility of a given protein and the possibility of complex formation.     

An empirical study of control logic specifications for programmable logic controllers

This paper presents an empirical study of control logic specifications used to document industrial control logic code in manufacturing applications. More than one hundred input/output related property specifications from ten different reusable function blocks were investigated. The main purpose of the study was to provide understanding of how the specifications are expressed by industrial practitioners, in order to develop new tools and methods for specifying control logic software, as well as for evaluating existing ones. In this paper, the studied specifications are used to evaluate linear temporal logic in general and the specification language ST-LTL, tailored for functions blocks, in particular. The study shows that most specifications are expressed as implications, that should always be fulfilled, between input and output conditions. Many of these implications are complex since the input and output conditions may be mixed and involve sequences, timer issues and non-boolean variables. Using ST-LTL it was possible to represent all implications of this study. The few non-implication specifications could be specified in ST-LTL as well after being altered to suit the specification language. The paper demonstrates some advantages of ST-LTL compared to standard linear temporal logic and discusses possible improvements such as support for automatic rewrite of complex specifications.     

Modulation of silica layer properties by varying the granulometric state of tetraethyl orthosilicate precursor aerosols during combustion chemical vapor deposition (CCVD)

Abstract

For the purpose of silica surface layer modulation, a pneumatic-controlled two-substance atomizer with inertia-based coarse droplet separation was operated at different system pressures for tetraethyl orthosilicate precursor aerosol supply during combustion chemical vapor deposition. A comprehensive testing study was performed to characterize the atomizer’s performance characteristics, initial precursor aerosols at the atomizer’s outlet, transformed aerosols before combustion, combustion aerosols and formed layers. Laser diffraction spectrometry, differential electrical mobility analyses and condensation particle counting were used for aerosol characterization with regard to particle size and particle production quantities. Layers were characterized by scanning electron microscopy, atomic force microscopy, spectral ellipsometry, water contact angle measurements and light transmission concerning geometric properties (thickness, surface structure and roughness) and physical behaviors (i.e., optical behaviors, hydrophobicity). Results show a quasi-linear relationship of the ejection mass flow of the pneumatic-controlled atomizer and geometric layer properties which again show a direct relationship to the physical properties. No correlation was found between the aerosols before combustion and the combustion aerosols since the majority of combustion aerosol particles are synthesized solely from the gas phase based on evaporated precursor material.

Copyright © 2020 American Association for Aerosol Research     

A corpus of Schlieren photography of speech production: potential methodology to study aerodynamics of labial,nasal and vocalic processes

Language Resources and Evaluation - This report presents a corpus of articulations recorded with Schlieren photography, a recording technique to visualize aeroflow dynamics for two purposes. First,...     

A pluggable service platform architecture for e-commerce

In the beginning of the e-commerce era, retailers mostly adopted vertically integrated solutions to control the entire e-commerce value chain. However, they began to realize that to achieve agility, a better approach would be to focus on certain core capabilities and then create a partner ecosystem around them. From a technical point of view, this means it is advised to have a lightweight platform architecture with small core e-commerce functionality which can be extended by additional services from third party providers. In a typical e-commerce ecosystem with diverse information systems of network partners, integration and interoperability become critical factors to enable seamless coordination among the partners. Furthermore an increasing adoption of cloud computing technology could be observed resulting in more challenging integration scenarios involving cloud services. Thus, an e-commerce platform is required that suites the advanced needs for flexible and agile service integration. Therefore, this paper aims to present a reference architecture of a novel pluggable service platform for e-commerce. We investigate on currently available online shop platform solutions and integration platforms in the market. Based on the findings and motivated by literature on service-oriented design, we develop an architecture of a service-based pluggable platform for online retailers. This design is then instantiated by means of a prototype for an e-commerce returns handling scenario to demonstrate the feasibility of our architecture design.