Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Lean philosophy: implementation in a forging company

This research addresses the implementation of lean philosophy in a forging company with a focus on radial forging production flow lines. Here, the prime motive is to evolve and test several strategies to eliminate waste on the shop floor. In this research, a systematic approach is suggested for the implementation of lean principles. This paper describes an application of value stream mapping (VSM). Consequently, the present and future states of value stream maps are constructed to improve the production process by identifying waste and its sources. Furthermore, Taguchi’s method of design of experiments is pursued here to minimize the forging defects produced due to imperfect operating conditions. A noticeable reduction in set-up time and work-in-process (WIP) inventory level is substantiated. Finally, we conclude with a discussion of managerial implications and the future scope of research.     

The Design of Discrimination Experiments

Experimentation plays a fundamental role in scientific discovery. Scientists experiment to gather data, investigate phenomena, measure quantities, and test theories. In this article, we address the problem of designing experiments to discriminate between two completing theories. Given an initial situation for which the two theories make the same prediction, the experiment design problem is to determine how to modify the situation such that the two theories make different predictions for the modified situation. The modified situation is called a discrimination experiment. We present a knowledge-intensive method called DEED for designing discrimination experiments. The method analyzes the differences in the two theories' explanations of the prediction for the initial situation. Based on this analysis, it determines modifications to the initial situation that will result in a discrimination experiment. We illustrate the method with the design of experiments to discriminate between several pairs of qualitative theories in the fluids domain.     

Does histology influence outcome in childhood Hodgkin's disease? Results from the United Kingdom Children's Cancer Study Group

PURPOSE: Histology has been identified as an important prognostic factor in Hodgkin's disease (HD) in adults. Information regarding the impact of histology on outcome in childhood HD is scarce. This study determines the effect of histology on the overall survival (OS) or progression-free survival (PFS) in a national series of children treated in a standardized manner. PATIENTS AND METHODS: The results of treatment of 331 assessable patients, treated between January 1, 1982 and June 30, 1992, in the United Kingdom Children's Cancer Study Group (UKCCSG) Hodgkin's study I were reviewed to evaluate OS, PFS, and deaths according to stage and histology. Treatment was either involved-field radiation alone (stage IA) or chlorambucil, vinblastine, procarbazine, and prednisolone (ChlVPP) chemotherapy with or without mediastinal radiation. All were clinically staged at diagnosis. RESULTS: Nodular sclerosing (NS) HD was the most common histologic subtype (155 of 331 patients [47%]) and was uniformly distributed through all stages. Lymphocyte-depletion (LD) HD was extremely uncommon (< 1%). Mixed-cellularity (MC) HD had the highest relapse rate, but this was only significant (P < .05) in stage I patients who received local irradiation alone. There was no other statistically significant difference in OS and PFS between the various histologic subtypes. Multivariate analysis for PFS and OS confirmed that stage was the most important prognostic factor and that histology did not have an effect after stratification by stage. CONCLUSION: This study demonstrates that with effective multiagent chemotherapy, histologic subtype does not influence outcome. The high relapse rates in stage I MC subtype indicates that MC HD is biologically aggressive and systemic treatment with or without local irradiation may be indicated. The high relapse rate in stage IV patients appeared to be independent of histology.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.     

Monitoring of the ballistocardiogram with the static chargesensitive bed

The static charge sensitive bed (SCSB) consists of a sensitive movement detector embedded in a mattress. When a subject rests on the bed, a single electrical signal, containing components reflective of cardiac, respiratory, and body movement related motion, is produced. This paper describes a digital signal processing technique to separate the BCG from the SCSB signal. An evaluation of this algorithm was conducted using recordings from normal volunteers. Comparisons with simultaneously recorded reference signals indicated that the algorithm performed satisfactorily in a laboratory environment.     

Experimental study of composite cold-formed steel C-section floor joists

Twelve large-scale slab specimens and twenty-two companion push-out specimens were tested to study the behavior and capacity of composite slab joists consisting of cold-formed steel C-sections and concrete. Four shear transfer mechanisms, including surface bond, pre-fabricated bent-up tabs, pre-drilled holes, and self-drilling screws, were employed on the surface of the flange embedded in the concrete to provide shear transfer capacity. Results indicated that specimens employed with shear transfer enhancements showed a marked increase in strength and reduced deflection compared with those relying only on a natural bond between steel and concrete to resist shear. Of the three shear transfer enhancements investigated, bent-up tabs provided the best performance at both the strength and serviceability limit states, followed by drilled holes in the embedded flanges. The use of self-drilling screws resulted in the lowest strength increase. The correlation of shear transfer capacity of push-out specimens with the ultimate capacity of large-scale specimens indicated that the average experimental flexural capacity of the slab specimens was approximately 1.16 times the average predicted value based on push-out test results.     

A quantitative analysis of the effectiveness of laparascopy and endoscopy virtual reality simulators

The increasing use of virtual reality (VR) simulators in surgical training makes it imperative that definitive studies be performed to assess their training effectiveness. Indeed in this paper we report the meta-analysis of the efficacy of virtual reality simulators in (1) the transference of skills from the simulator training environment to the operating room and (2) their ability to discriminate between the experience levels of its users. The task completion time and the error score were the two study outcomes collated and analyzed in this meta-analysis. Sixteen studies were identified from a computer-based literature search (1996-2004). The meta-analysis of the random-effects model (because of the heterogeneity of the data) revealed that training on virtual reality simulators did lessen the time taken to complete a given surgical task as also clearly differentiate between the experienced and the novice trainees. Meta-analytic studies such as the one reported here would be very helpful in the planning and setting up of surgical training programs and for the establishment of reference ‘learning curves’ for a specific simulator and surgical task. If any such programs already exist they can then indicate the improvements to be made in the simulator used such as providing for more variety in their case scenarios based on the state and/or rate of learning of the trainee.