Assessing the Role of Developmental and Environmental Factors in Chemical Defence Variation in Heliconiini Butterflies

Journal of Chemical Ecology - Chemical defences in animals are both incredibly widespread and highly diverse. Yet despite the important role they play in mediating interactions between predators...     

Investigations on the Corrosion Properties of Sn–1Cu–1Ni–xAg Lead Free Solders in 3.5% NaCl Solution

Protection of Metals and Physical Chemistry of Surfaces - Due to the directions and environmental legislations from RoHS (Restrictions of Hazardous Substances), WEEE (World Electrical and...     

Spatio-temporal evolution of the deformation around the Rio-Patras fault (Greece) observed by synthetic aperture radar interferometry from 1993 to 2017

We analysed the ground deformation across two blocks defined by the Rio-Patras fault from 1993 to 2017 using multi-temporal Synthetic Aperture Radar Interferometry (InSAR) techniques. Our main objective was to contribute to the assessment of seismic hazard near the large city of Patras. Multiple data-sets were used, each one covering different temporal periods. Descending and ascending acquisitions, providing different viewing geometries contribute to fully determine the ground displacement in 3D. The data-sets used are from the European Space Agency’s (ESA) European Remote Sensing (ERS), Environmental Satellite (ENVISAT) and SENTINEL-1 as well as German Aerospace Center (DLR) ’s TERRASAR-X missions. Considering ESA’s missions covering both acquisition geometries and long periods, the southern block, showing lack of a sufficient number of scatterers does not allow the displacement characterization. In contrary, the northern block is characterized by a high number of scatterers having values of maximum likehood ranging from ?3.5 to ?4.3 mm year^?1 for ascending geometry and from ?1.6 to ?2.7 mm year^?1 for the descending one. The fact that both geometries show negative values of displacements are consistent with downlift movement and at the same time the quantitative differentiation probably indicates an horizontal component as well.     

Fracture toughness of high strength seamless pipe steel from SE(T) and SE(B) specimens evaluated by different standards

Recently released, BS 8571:2014 standard offers an alternative for the experimental determination of fracture toughness and resistance curves of metallic materials from SE(T) specimens. Similar in stress conditions and constraint to cracked tubes, specimens in SE(T) geometry should yield less conservative toughness values than conventional high‐constraint specimens, such as SE(B) geometry. However, the convention to determine the J‐integral fracture toughness proposed in the new BS standard is different from ASTM standards. In this work, SE(T) and SE(B) specimens of similar dimensions of a tough high‐strength seamless pipe steel were tested following the BS 8571:2014 and ASTM E1820‐16 standards, respectively. Because of the different standardized definitions, SE(T) specimens yield lower fracture toughness than SE(B) specimens, which could lead to more conservative results in structural integrity analysis. This investigation also suggests the introduction of the blunting line concept in the BS 8571:2014 standard in order to minimize this problem.     

Design of biorefinery systems for conversion of corn stover into biofuels using a biorefinery engineering framework

Unlocking the potential and value of lignocellulosic residues is an important step in making biorefineries economically and environmentally promising. This calls for a holistic and systematic approach in designing sustainable industrial systems. In this work, biorefinery systems via biochemical route (acetone–butanol–ethanol or ABE system) and thermochemical route (gasification and mixed alcohols or GMA system) for converting corn stover into biofuels have been designed using a Sustainable Engineering Framework. The framework involves eight main steps: (1) design problem definition, (2) data collection, (3) process synthesis and simulation, (4) process integration, (5) resource recovery from residues, (6) utility system design, (7) economic and environmental modelling and (8) economic value and environmental impact margin analysis for decision making. Consideration of resource recovery from biorefinery waste streams has proven to be the key in making biorefineries self-sustaining and with low environmental impacts. Simultaneous economic and environmental feasibility assessment at the early stage of process design is highly envisaged. The cost of biofuel production in the ABE system has been found to be 49.2 US$/GJ and 69.9 US$/GJ in the GMA system. The greenhouse gas emissions are 46.2 g CO₂-eq/GJ for ABE and 19.0 g CO₂-eq/GJ for GMA, lower than gasoline (85 g CO₂-eq/GJ). The GMA system is not economically compelling though with high environmental benefit, while the ABE system has shown to be both economically and environmentally feasible.     

Rapid Aging as a Key to Understand Deactivation of Ni/Al2O3 Catalysts Applied for the CO2 Methanation

Catalysis Letters - We developed a rapid aging method for Ni/Al2O3 methanation catalysts mimicking the real aging in the actual application. The method is based on hydrothermal deactivation of the...     

A power‐area‐efficient, 3‐band, 2‐RX MIMO,TD‐LTE receiver with direct‐coupled ADC

In this work, a power‐area‐efficient, 3‐band, 2‐RX MIMO, and TD‐LTE (backward compatible with the HSPA+, HSUPA, HSDPA, and TD‐SCDMA) CMOS receiver is presented and implemented in 0.13‐μm CMOS technology. The continuous‐time delta‐sigma A/D converters (CT ?Σ ADCs) are directly coupled to the outputs of the transimpedance amplifiers, eliminating the need of analog anti‐aliasing filters between RX front‐end and ADCs in conventional structures. The strong adjacent channel interference without low‐pass filter attenuation is handled by proper gain control. A low‐power small‐area solution for excess loop delay compensation is implemented in the CT ?Σ ADC. At 20 MHz bandwidth, the CT ?Σ ADC achieves 66 dB dynamic range and 3.5 dB RX chip noise figure is measured. A maximum of 2.4 dB signal‐to‐noise ratio degradation is measured in all the adjacent channel selectivity (ACS) and blocking tests, demonstrating the effectiveness of the strategy against the low‐pass filter removal from the conventional architecture. The receiver dissipates a maximum of 171 mW at 2‐RX MIMO mode. To our best knowledge, it is the first research paper on the design of fully integrated commercial TD‐LTE receiver. Copyright © 2014 John Wiley & Sons, Ltd.     

Oil‐spill cleanup: The influence of acetylated curaua fibers on the oil‐removal capability of magnetic composites

A magnetic resin based on cardanol, furfural, and curaua fibers was prepared and characterized. The material could be used in oil‐spill cleanup processes, because of its aromatic/aliphatic balance. The resin was prepared through bulk polycondensation of cardanol and furfural in the presence of curaua fibers and maghemite nanoparticles. Hydrophobicity of the curaua fibers was improved by acetylation, increasing the oil‐absorbing capability of the composites. The obtained magnetic composites were studied by Fourier‐transform infrared spectroscopy, X‐ray diffraction, and thermogravimetric analysis. Degree of cure, magnetic force, and oil‐removal capability tests were also performed. The results show that the composites possess an elevated cure degree in addition to a considerable magnetic force. The materials exhibit a good oil removal capability in the presence of a magnetic field, which is improved by the use of acetylated curaua. In the best case, the composite filled with maghemite and curaua can remove 12 parts of oil from water. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41732.