苏黎世联邦理工学院模式:建构以设计为中心的师资结构

通过阐述设计与研究的关系、机构与教学组织、师资任用与评价、师资引进4个方面介绍了苏黎世联邦理工学院模式的建筑教育和师资建设.建筑学教学的核心目标是学生设计能力的培养,而知识和研究是其必要保障,应该在认识设计与研究明确差异的基础上,构建适合的组织机构、教学计划、师资引进和评价体系.只有人尽其才、各尽所能才能促进教师和院系的长远发展.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

Advanced Measures to Characterize Mechanical Properties of Refractories

The thermomechanical modelling method is becoming an important tool nowadays for the refractory researchers,suppliers and end-users. On one hand,applications focus on the post-mortem thermomechanical analysis to interpret the occurred failure phenomena of refractories in service. On the other hand,a priori investigation is very helpful for the design of refractory lining concepts before putting them into effect; as a result it will minimize the probability of refractory lining premature failure and save costs for the refractory suppliers as well as for the end-users. For both investigation routines,suitable material constitutive models and testing approaches are of relevance. Existing material constitutive models often used for refractories are the fictitious crack model acting for tensile failure,the Mohr-Coulomb or Drucker-Prager model describing shear failure,and the Norton-Bailey model representing creep. To characterize the tensile and shear failure of refractories at room temperature and elevated temperatures,a wedge splitting test and a modified shear test can be applied,respectively. The creep behavior and corresponding creep parameters of refractories can be determined with an appropriate creep testing device at elevated loads. The proper application of material constitutive models and testing approaches allows for improving the thermo-mechanical modelling and the optimization of the lining design.     

Analysis of the Processing-Pressure Dependent Refractive Index of Polycarbonate by Transmission Measurements of Glass-Filled Specimen

In this study, the influence of pressure during processing on the refractive index (RI) of polycarbonate (PC) was investigated by transmission measurements on glass-filled samples with a spectrometer. In order to isolate the pressure dependence of the RI from other influencing parameters such as cooling rate, orientation and stress states, the samples were prepared in a pressure-specific volume-Temperature (pvT) instrument under constant cooling rate and temperature history and without shear effects. Subsequently, the RI was determined at the intersection of the dispersion curves of the glass and the polymer by evaluating the wavelength of the maximal transmission of the samples. The mean RI over the entire cross section of the sample is determined by the transmission measurements without complex sample preparation. The investigations show that the RI of PC increases by 3.26 E-6 per bar with increasing pressure. POLYM. ENG. SCI., 60:512–516, 2020. © 2019 The Authors. Polymer Engineering & Science published by Wiley Periodicals, Inc. on behalf of Society of Plastics Engineers.     

C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

Three stage creep behavior of MgO containing ordinary refractories in tension and compression

In service tensile and compressive stresses occur in refractory linings, these stresses lead to creep of refractories. Ordinary refractories experience creep of the primary stage and may further proceed to the secondary and tertiary creep stage. For the development of advanced material models for finite element simulations it is necessary to investigate the creep behavior in all three creep stages under tensile and compressive loads. Hence, two advanced high temperature uniaxial creep testing devices, applying a wide range of tensile and compressive loads, were used to determine the three creep stages in a reasonable time under service related loading conditions. The Norton–Bailey creep equations and an inverse identification procedure were applied for the evaluation of the experimental results. A magnesia refractory was studied at elevated temperatures and its respective creep parameters for each stage were determined. The stress dependency on the creep behavior can be seen clearly on the creep curves and the corresponding creep parameters. Furthermore, a comparative study of creep parameters and creep rates was performed between the magnesia refractory and a magnesia-chromite refractory. The results demonstrate the significant asymmetrical creep behavior in tension and compression for both materials. The creep investigation in this paper favors the requirement for consideration of the three stage creep behavior and the asymmetrical creep behavior in thermomechanical modelling activities of industrial vessels.     

Chemical-Shift Perturbations Reflect Bile Acid Binding to Norovirus Coat Protein: Recognition Comes in Different Flavors

Bile acids have been reported as important cofactors promoting human and murine norovirus (NoV) infections in cell culture. The underlying mechanisms are not resolved. Through the use of chemical shift perturbation (CSP) NMR experiments, we identified a low-affinity bile acid binding site of a human GII.4 NoV strain. Long-timescale MD simulations reveal the formation of a ligand-accessible binding pocket of flexible shape, allowing the formation of stable viral coat protein–bile acid complexes in agreement with experimental CSP data. CSP NMR experiments also show that this mode of bile acid binding has a minor influence on the binding of histo-blood group antigens and vice versa. STD NMR experiments probing the binding of bile acids to virus-like particles of seven different strains suggest that low-affinity bile acid binding is a common feature of human NoV and should therefore be important for understanding the role of bile acids as cofactors in NoV infection.     

Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride

Thermally conductive polymers offer new possibilities for the heat dissipation in electric and electronic components, for example, by a three‐dimensional shaping of the heat sinks. To face safety regulations, improved fire performance of those components is required. In contrast to unfilled polymers, those materials exhibit an entirely different thermal behavior. To investigate the flammability, a phosphorus flame retardant was incorporated into thermally conductive composites of polyamide 6 and hexagonal boron nitride. The flame retardant decreased the thermal conductivity only slightly. However, the burning behavior changed significantly, due to a different heat propagation, which was investigated using a thermographic camera. An optimum content of hexagonal boron nitride for a sufficient thermal conductivity and fire performance was found between 20 and 30 vol%. The improvement of the fire performance was due to a faster heat release out of the pyrolysis zone and an earlier decomposition of the flame retardant. For higher contents of hexagonal boron nitride, the heat was spread faster within the part, promoting an earlier ignition and increasing the decomposition rate of the flame retardant.