Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Assessment of Mixture and Eulerian Multiphase Models in Predicting the Thermo-Fluidic Transport Characteristics for Fly Ash-Water Slurry Flow in Straight Horizontal Pipeline

The thermo-fluidic transport characteristics of the fly ash–water slurry flow in a straight horizontal pipe are predicted by deploying two different multiphase modeling strategies, viz. the mixture and the Eulerian multiphase models. Comparisons between the two model predictions in terms of the pressure drop and heat transfer coefficient are done along with the comparisons between the single (water) and the two phase system (slurry). Spherical fly ash particles, with diameter of 13 µm for an average inflow velocity ranging from 1 to 5 m/s and particle concentrations within 0–40% by volume for each velocity are considered as the dispersed phase carried by the carrier phase water. Significant differences between the two model predictions can be observed both from the qualitative and quantitative perspectives. This finally leads to the appropriate choice of the multiphase model for predicting the thermo-fluidic transport characteristics in slurry flow.     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Weak coin flipping with small bias

This paper presents a quantum protocol that demonstrates that weak coin flipping with bias ≈0.239, less than 1/4, is possible. A bias of 1/4 was the smallest known, and followed from the strong coin flipping protocol of Ambainis in [33rd STOC, 2001] (also proposed by Spekkens and Rudolph [Phys. Rev. A 65 (2002) 012310]). Protocols with yet smaller bias ≈0.207 have independently been discovered by Ambainis (2001) and Spekkens and Rudolph [Phys. Rev. Lett. 89 (2002) 227901]. We also present an alternative strong coin flipping protocol with bias 1/4 with analysis simpler than that of Ambainis [33rd STOC, 2001].     

Influence of Hydroxypropyl Methylcellulose and of Manufacturing Technique on in Vitro Performance of Selected Antacids

Factors affecting the performance of antacids F-MA 11, dihydroxy aluminum aminoacetate, magaldrate and magnesium hydroxide were studied in vitro using Schaub's acid neutralization test, a modified Reheis reaction velocity test and the USP test. From the results obtained it was evident that type and combination of antacid, the adjuvants and formulation techniques used in preparation of antacids affect their performance. The USP preliminary antacid test and acid neutralization test are not optimal in vitro tests to evaluate in vitro onset and duration of action of antacids.     

A genetic‐based neuro‐fuzzy controller for blind equalization of time‐varying channels

This paper presents a neuro‐fuzzy network (NFN) where all its parameters can be tuned simultaneously using genetic algorithms (GAs). The approach combines the merits of fuzzy logic theory, neural networks and GAs. The proposed NFN does not require a priori knowledge about the system and eliminates the need for complicated design steps such as manual tuning of input–output membership functions, and selection of fuzzy rule base. Although, only conventional GAs have been used, convergence results are very encouraging. A well‐known numerical example derived from literature is used to evaluate and compare the performance of the network with other equalizing approaches. Simulation results show that the proposed neuro‐fuzzy controller, all parameters of which have been tuned simultaneously using GAs, offers advantages over existing equalizers and has improved performance. From the perspective of application and implementation, this paper is very interesting as it provides a new method for performing blind equalization. The main contribution of this paper is the use of learning algorithms to train a feed‐forward neural network for M‐ary QAM and PSK signals. This paper also provides a platform for researchers of the area for further development. Copyright © 2008 John Wiley & Sons, Ltd.     

Electro-osmotic transport in charged cylindrical micro- and nano-channels

Present paper deals with the electro-osmotic flow in a infinitely extended cylindrical micro- and nano-channel. The channel height is considered to be much less than the channel length. We consider a mixture of water or another neutral solvent and a salt compound such as sodium chloride for which the ionic species are entirely dissociated. We have developed a two-dimensional numerical model to analyze the flow characteristics and concentration distributions of a electro-osmotic flow without using the Debye-Hückel approximation. The governing system of equations consist of the mole fractions of ions, the potential and the fluid flow equations. Results are produced for the case, where the channel height is much greater than the width of the electric double layer (EDL) (micro-channel) and for the case where the channel height is of the order of the width of the EDL (nano-channel). For various values of mole fraction, we studied the electro-osmotic flow profiles and the potential distribution along the channel at different channel heights. In this case of steady flow the velocity field and the potential are identical. The electro-osmotic flow produces a uniform ‘plug profile’ at channel heights greater than 20 nm, which results in reduced sample species dispersion as compared to the velocity gradients associated with the pressure driven flows. Asymptotic solutions are obtained when the flow in a micro-channel is considered.     

Electrical properties of N2O/NH3 plasma grownoxynitride on strained-Si

Growth of ultrathin (<100 Å) oxynitride on strained-Si using microwave N₂O and NH₃ plasma is reported. X-ray photoelectron spectroscopy (XPS) results indicate a nitrogen-rich layer at the strained-Si/SiO₂ interface. The electrical properties of oxynitrides have been characterized using a metal-insulator-semiconductor (MIS) structure. A moderately low value of insulator charge density (6.1×10¹⁰ cm^-2) has been obtained for NH₃ plasma treated N₂O oxide sample. Nitrided oxide shows a larger breakdown voltage and an improved charge trapping properties under Fowler-Nordheim (F-N) constant current stress     

Synthetic resins: XV. Chelation ion exchange properties of 2,4- dinitrophenylhydrazone of resacetophenone-formaldehyde resin

A number of copolymers were synthesised by condensing the 2,4-dinitrophenylhydrazone of resacetophenone with substituted benzoic acids/ phenols and formaldehyde in the presence of sodium hydroxide or hydrochloric acid. The decomposition temperature, solubility and viscosity of the polymers have been determined. The ion-exchange properties have been studied by using a batch equilibrium method. The distribution of a number of metal ions between an aqueous solution and the resin have been measured. A wide range of pH and variable ionic strengths have been investigated.