Cellular mechanisms for developmental toxicity of chlorpyrifos: targeting the adenylyl cyclase signaling cascade

Developmental neurotoxicity caused by chlorpyrifos exposure is generally thought to target cholinesterase but chlorpyrifos may also act on cellular intermediates, such as adenylyl cyclase, that serve global functions in the coordination of cell development. In the current study, neonatal rats were exposed to apparently subtoxic doses of chlorpyrifos (no weight loss, no mortality) either on Postnatal Days 1-4 or on Postnatal Days 11-14, and the effects on components of the adenylyl cyclase cascade were evaluated in brain regions that are enriched (forebrain) or sparse (cerebellum) in cholinergic innervation, as well as in a nonneural tissue (heart). In all three, chlorpyrifos evoked deficits in multiple components of the adenylyl cyclase cascade: expression and activity of adenylyl cyclase itself, functioning of G-proteins that link neurotransmitter and hormone receptors to cyclase activity, and expression of neurotransmitter receptors that act through this cascade. Disruption of signaling function was not restricted to transduction of cholinergic signals but rather extended to adrenergic signals as well. In most cases, the adverse effects were not evident during the immediate period of chlorpyrifos administration, but appeared after a delay of several days. These results suggest that chlorpyrifos can affect cell development by altering the activity and reactivity of the adenylyl cyclase signaling cascade, a major control point for trophic regulation of cell differentiation. The effects are not restricted to cholinergic targets, nor even to the central nervous system. Hence, disruption of cell development by chlorpyrifos is likely to be more widespread than previously thought.     

Leaching of sulfidized chalcopyrite with H<Subscript>2</Subscript>SO<Subscript>4</Subscript>-NaCl-O<Subscript>2</Subscript>

The recovery of copper from chalcopyrite by leaching is complex not only due to the slow dissolution kinetics of this mineral in most aqueous media but also due to the production of solutions that are heavily contaminated with iron. On the contrary, the leaching of sulfidized chalcopyrite is very attractive because of a faster and more selective dissolution of copper compared to the leaching of the untreated chalcopyrite. In this work, the results of leaching in H₂SO₄-NaCl-O₂ solutions of sulfidized chalcopyrite concentrate are discussed. Experiments were carried out with chalcopyrite concentrates previously reacted with elemental sulfur at 375 °C for 60 minutes. The results showed that the concentration of chloride ions below 0.5 M, temperature, and leaching time are important variables for the extraction of Cu. On the other hand, Fe extraction was little affected by the same variables, remaining below 6 pct for all the experimental conditions tested. Microscopic observations of the leached particles showed that the elemental sulfur produced by the reaction does not form a coherent layer surrounding the particle, but rather concentrates in certain locations as large clusters. The leaching kinetics can be accurately described by a nonreactive core-shrinking rim topochemical expression for spherical particles 1 − (1 − 0.45X)^1/3=kt. The activation energy found was 76 kJ/mol for the range 85 °C to 100 °C.     

The effect of nanoclays on the nucleation,crystallization, and melting mechanisms of isotactic polypropylene

The influence of organomodified nanoclay (montmorillonite) on the crystallization and melting mechanisms of isotactic polypropylene (iPP) was studied. Films of both neat polymer and clay nanocomposites were prepared after molecular weight optimization through melt extrusion. Products exhibited the tactoidlike morphology since no compatibilizers were used. The effect of introduction of nanoclay within the polymer was studied through isothermal crystallization and linear heating. The results indicated that low nanoclay concentrations induce the formation of the β‐crystalline structure, its formation being inhibited with high nanoclay contents. Dynamic nonisothermal bulk crystallization experiments indicated that nanoclays act as nucleating agents of iPP. Isothermal, bulk crystallization studies indicated that the crystallization process (induction time and crystallization kinetics) is proportionally accelerated by the nanoclay presence. There was also an accelerated formation of secondary crystallization when nanoclays were present in high concentrations. POLYM. ENG. SCI., 47:1889–1897, 2007. © 2007 Society of Plastics Engineers     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.     

Influence of post‐extrusion parameters on the final morphology of polystyrene/high density polyethylene blends

The deformation of the dispersed phase in polystyrene/high density polyethylene (PS/HDPE) blends produced by ribbon extrusion was studied numerically and experimentally. A mathematical model for the deformation of the dispersed phase in ribbon extrusion processing of polymer blends was developed assuming uniaxial deformation of the ribbon and the equilibrium shapes of the dispersed particles with a pressure balance over a drop. Simulated morphologies as function of the post‐extrusion parameters were obtained and compared with experiments. The analysis of the ribbon extrusion process showed that parameters such as draw ratio (DR) and ribbon‐water contact length (X) significantly influence the ribbon dimensions, the extensional stress, and the stretching force. The results also showed that deformation and coalescence of the dispersed phase in the ribbon extrusion processing of polymer blends increase at higher DR and/or lower X values. The comparison between the model and the experimental morphologies of PS/HDPE produced a good agreement.     

Design Principles for Cationic,Astrocyte-Targeted Probes

The brain's astrocytes play key roles in normal and pathological brain processes. Targeting small molecules to astrocytes in the presence of the many other cell types in the brain will provide useful tools for their visualization and manipulation. Herein, we explore the functional consequences of synthetic modifications to a recently described astrocyte marker composed of a bright rhodamine-based fluorophore and an astrocyte-targeting moiety. We altered the nature of the targeting moiety to probe the dependence of astrocyte targeting on hydrophobicity, charge, and pK_a when exposed to astrocytes and neurons isolated from the mouse cortex. We found that an overall molecular charge of +2 and a targeting moiety with a heterocyclic aromatic amine are important requirements for specific and robust astrocyte labeling. These results provide a basis for engineering astrocyte-targeted molecular tools with unique properties, including metabolite sensing or optogenetic control.     

Mechanical Characterization of Copper-Copper Wires Joined by Friction Welding Using Instrumented Indentation Technique

Friction welding samples of both the fire-refined high-conductivity (FRHC) and electrolytically tough pitch (ETP) copper alloy wires have been mechanically characterized by instrumented indentation technique and tensile test. Hardness profiles in the perpendicular direction to the weld interface, in both the central and peripheral zones, of the as-welded FRHC-FRHC and ETP-ETP samples have been investigated at nano-/micrometric scale. The microstructures of welds have been observed using both the optical microscopy and scanning electronic microscopy. The results show the typical friction welding zones: the interface zone, the thermo-mechanically affected zone (TMAZ), and the transition zone between the TMAZ and the base metal zone (BMZ) that present a microstructure and hardness close to the base metal. No presence of a heat-affected zone is observed. Although both welds show the same tendency in hardness distribution, FHRC-FHRC weld presents a TMAZ narrower than ETP-ETP one, which produces a stronger drop in hardness with increasing of the distance from welding central line, and a higher difference in hardness between the central and peripheral zones. The tensile tests of ETP-ETP welds showed that all samples broke by the BMZ that is far away from the interface of the welded joint, while the most of the FRHC-FRHC welds are broken at the TMAZ region at low strengths. These appreciable differences in mechanical properties for the FHRC-FHRC welds are probably generated by a stronger variation in their microstructural properties. Therefore, it may justify the welding failures in the FHRC-FHRC weld at the typical tensile stress for an industrial cold-drawn process of wires.     

Assessing performance of skim milk ultrafiltration by using technical parameters

In the present study a mathematical model has been applied to interpret the permeate flux decay that occurs during the process of concentrating skim milk by ultrafiltration using a commercial membrane module. The effects on membrane fouling of two operational variables, temperature and transmembrane pressure, have been studied using technical parameters. An energy analysis has demonstrated that the major energy consumption takes place in the thermal process and not in the mechanical pumping of the fluid. In addition, higher increments in permeate volume can be achieved by increasing transmembrane pressure, not temperature. The mathematical analysis presented here permits the evaluation of optimum values of the engineering parameters necessary to design and operate skim milk ultrafiltration units.