床沙表层非均匀分布对泥沙输移的影响

本文基于床沙宽度百分比及面积百分比的分析，选择上述二者有关参数来反映床沙表层不均匀分布特征，并由此得到了床沙不受隐蔽作用的最大粒径Ｄａ与面积平均粒径ｄｓ之关系。借助力学分析方法，分别得到了隐蔽区与暴露区的泥沙起动流速公式；同时，在输沙率关系中引入了宽度百分比Ｐｂ及ｄｓ，该式能较好地反映床沙粗化过程中，输沙率与表层泥沙组成之间的依存关系。     

Design of robust model-based controllers via parametric programming

In this paper a method is presented for deriving the explicit robust model-based optimal control law for constrained linear dynamic systems. The controller is derived off-line via parametric programming before any actual process implementation takes place. The proposed control scheme guarantees feasible operation in the presence of bounded input uncertainties by (i) explicitly incorporating in the controller design stage a set of feasibility constraints and (ii) minimizing the nominal performance, or the expectation of the performance over the uncertainty space. An extension of the method to problems involving target point tracking in the presence of persistent disturbances is also discussed. The general concept is illustrated with two examples.     

Formation of neutral molecules of potential stellar interest by neutralisation of negative ions in a mass spectrometer. The application of experiment and molecular modelling in concert

This paper is a modified version of a lecture which describes the synthesis, structure and reactivity of some neutral molecules of stellar significance. The neutrals are formed in the collision cell of a mass spectrometer following vertical Franck-Condon one electron oxidation of anions of known bond connectivity. Neutrals are characterised by conversion to positive ions and by extensive theoretical studies at the CCSD(T)/aug-cc-pVDZ//B3LYP/6-31G(d) level of theory. Four systems are considered in detail, viz (i) the formation of linear C(4) and its conversion to the rhombus C(4), (ii) linear C(5) and the atom scrambling of this system when energised, (iii) the stable cumulene oxide CCCCCO, and (iv) the elusive species O(2)C-CO. This paper is not intended to be a review of interstellar chemistry: examples are selected from our own work in this area.     

Oligoaniline intermediates in the aniline-peroxydisulfate system

Chemical oxidative polymerization of aniline using peroxydisulfate oxidant in aqueous pH 2.5–10.0 buffers yields electrically insulating brown powders that are believed to be mixtures of Michael-type adducts of benzoquinone monoimine and aniline at various stages of hydrolysis. A spectroscopically similar product is formed when solid 1,4-benzoquinone is added to an aqueous solution of aniline at room temperature in the absence of peroxydisulfate. This suggests that the peroxydisulfate oxidant in the aniline/S₂O₈^2? system provides a pathway for the formation of benzoquinone monoimine as an intermediate. Benzoquinone monoimine intermediate could be formed as a result of a Boyland–Sims rearrangement of aniline proceeding via the intermediacy of p-aminophenyl sulfate. Benzoquinone monoimine undergoes a series of conjugate 1,4-Michael-type addition/reoxidation/coupling steps with aniline or p-aminophenyl sulfate yielding the oligoaniline product. The precipitate that is isolated is also in the midst of two simultaneous pH dependent hydrolysis reactions: (i) hydrolysis of the imine groups to quinone, and (ii) hydrolysis of arylsulfates to phenols. The ratio of hydrolysis in each case was determined by the C/N ratio and sulfur elemental analysis values yielding analytical data that is consistent with experimentally determined values and also with our proposed reaction scheme. These findings offer a rationale for the high C/N ratios (>6.0) frequently observed in these systems while tracing the genesis of the residual sulfur in the product to unhydrolyzed arylsulfate. The oligoaniline product has previously been reported to have a novel poly-aza structure consisting of continuously linked –N–N–N– bonds, and alternately also reported to consist of phenazine-type linkages. This study is consistent with the latter and describes a pathway to phenazine coupling through a second and third stage hydrolysis of the arylsulfate and reoxidation with peroxydisulfate. There is no pathway for the formation of linear –N–N–N– linkages in the aniline/benzoquinone adduct and the striking similarity between its spectroscopic properties and the aniline/S₂O₈^2? adduct suggests that it is not a preferred pathway under these experimental conditions.     

Utility scale wind turbines on a grid-connected island: A feasibility study

This paper analyzes the technical and economic feasibility of installing utility-scale wind turbines on the Fox Islands, located 12 miles from the coast of Maine in the United States. Three locations on the islands, as well as a near offshore site, are analyzed in detail as potential sites for wind turbine installations. As discussed in this work, the logistic problems of transporting and installing wind turbines on the island require innovative solutions. These include locally available amphibious vessels, which can land turbine components at suitable shallow spots on the island, self-erecting towers, which allow use of a smaller crane for installation, and a special turbine foundation suitable for the local ground conditions. In the economic analysis, in addition to standard life-cycle parameters, renewable energy credits (REC) were also included. This work concludes that the installation of sub-megawatt wind turbines on the island is logistically possible and will lead to a reduction in the cost of electricity to the customers.     

A mixed-integer programming approach for optimal configuration of artificial neural networks

A mathematical programming approach for automatic computation of the optimal configuration of artificial neural networks (ANNs) is presented. Training of the network is modelled as a mixed-integer program (MIP) where 0–1 binary variables are introduced to represent the existence (binary variable = 1) and non-existence (binary variable = 0) of the nodes and the interconnections between the nodes. The objective is to minimize the number of nodes and/or interconnections to meet a given error criteria. From modelling point of view, the key advantage of the proposed approach is that the user does not have to try different configurations of the network, a solution of the proposed MIP formulation automatically generates the optimal configuration of the network. From the implementation of ANN point of view, a simplified representation of the network is obtained, where redundant nodes and interconnections have been eliminated. A number of examples are presented to demonstrate the applicability of the proposed approach.     

Characterization and analysis of trap-related effects in AlGaN–GaN HEMTs

Traps are characterized in AlGaN–GaN HEMTs by means of DLTS techniques and the associated charge/discharge behavior is interpreted with the aid of numerical device simulations. Under specific bias conditions, buffer traps can produce “false” surface-trap signals, i.e. the same type of current-mode DLTS (I-DLTS) or ICTS signals that are generally attributed to surface traps. Clarifying this aspect is important for both reliability testing and device optimization, as it can lead to erroneous identification of the degradation mechanism, thus resulting in wrong correction actions on the technological process.     

Sperm motility and morphology as changing parameters linked to sperm count variations

Variations in semen analyses of 177 males over a 1 year period were assessed. The average means of total counts, motility, morphology, total motile count and non-motile % were determined for 5 classes of patients ranging from azoospermic to normospermic. Positive relationships between a falling sperm count, a decrease in motility and total motile counts were seen. Also, increasingly, abnormal forms were found with lower sperm counts.