Dielectric relaxation and conduction mechanism in Aurivillius ceramic Bi5Ti3FeO15

For this study, we synthesized Aurivillius Bi5Ti3FeO15 ceramic using the generic solid-state reaction route and then performed room-temperature X-ray diffraction to confirm that the compound had a single phase with no impurities. The surface morphology of the prepared sample was observed to contain microstructural grains approximately 0.2–2 μm in size. The dielectric properties of the sample were determ-ined as a function of frequency in a range of approximately 100 Hz to 1 MHz at various temperatures (303 K ≤ T ≤ 773 K). Nyquist plots of the impedance data were found to exhibit a semi-circular arc in the high-temperature region, which is explained by the equivalent electrical circuit (R1C1)(R2QC2), where R1 and R2 represent the resistances associated with the grains and grain boundaries, respectively, C1 and C2 are the re-spective capacitances, and Q is the constant phase element (CPE), which accounts for non-Debye type of behavior. Our results indicate that both the resistance and capacitance of the grain boundaries are more prominent than those of the grains. The alternating current (ac) conductiv-ity data were analyzed based on the Jonscher universal power law, which indicated that the conduction process is dominated by the hopping mechanism. The calculated activation energies of the relaxation and conduction processes were very similar (0.32 to 0.53 eV), from which we conclude that the same type of charge carriers are involved in both processes.     

Effect of Co substitution on the structural,dielectric and optical properties of KBiFe2O5

Cobalt (Co)-modified brownmillerite KBiFe2O5 (KBFO; [KBiFe2(1?x)Co2xO5 (x = 0, 0.05)]) polycrystalline is synthesized following the solid-state reaction route. Rietveld refinement of X-ray diffraction data confirmed the phase purity of KBFO and KBiFe1.9Co0.1O5 (KBFCO). The optical bandgap energy (Eg) of KBFO decreased from 1.59 to 1.51 eV because of Co substitution. The decrease in bandgap can be attributed to the tilting of the Fe–O tetrahedral structure of KBFCO. The observed room-temperature Raman peaks of KBFCO shifted by 3 cm?1 toward a lower wavenumber than that of KBFO. The shift in Raman active modes can be attributed to the change in the bond angles and bond lengths of the Fe–O tetrahedral structure and modification in response to oxygen deficiency in KBFO because of Co doping. Compared with that of KBFO, the frequency-dependent dielectric constant and dielectric loss of KBFCO decrease at room temperature, which is a con-sequence of the reduction in oxygen migration and modification in response to vibrational modes present in the sample.     

Design of optimum solid oxide membrane electrolysis cells for metals production

Oxide to metal conversion is one of the most energy-intensive steps in the value chain for metals production. Solid oxide membrane (SOM) electrolysis process provides a general route for directly reducing various metal oxides to their respective metals, alloys, or intermetallics. Because of its lower energy use and ability to use inert anode resulting in zero carbon emission, SOM electrolysis process emerges as a promising technology that can replace the state-of-the-art metals production processes. In this paper, a careful study of the SOM electrolysis process using equivalent DC circuit modeling is performed and correlated to the experimental results. A discussion on relative importance of each resistive element in the circuit and on possible ways of lowering the rate-limiting resistive elements provides a generic guideline for designing optimum SOM electrolysis cells.     

Antiviral strategies against influenza virus: towards new therapeutic approaches

Influenza viruses are major human pathogens responsible for respiratory diseases affecting millions of people worldwide and characterized by high morbidity and significant mortality. Influenza infections can be controlled by vaccination and antiviral drugs. However, vaccines need annual updating and give limited protection. Only two classes of drugs are currently approved for the treatment of influenza: M2 ion channel blockers and neuraminidase inhibitors. However, they are often associated with limited efficacy and adverse side effects. In addition, the currently available drugs suffer from rapid and extensive emergence of drug resistance. All this highlights the urgent need for developing new antiviral strategies with novel mechanisms of action and with reduced drug resistance potential. Several new classes of antiviral agents targeting viral replication mechanisms or cellular proteins/processes are under development. This review gives an overview of novel strategies targeting the virus and/or the host cell for counteracting influenza virus infection.     

Leishmania donovani in hamsters: stimulation of non-specific resistance by some novel glycopeptides and impact on therapeutic efficacy

Several glycopeptides structurally related to muramyl dipeptide (MDP) have been synthesized and evaluated for their ability to stimulate the non-specific resistance of hamsters against L. donovani infection. These compounds have been named CDRI compounds. The synthetic procedure used for compounds 86/448 and 84/212 is described. MDP and its synthetic congeners were administered as immunostimulants at a prophylactic dose of 3 mg/kg at two weeks interval. The challenge infection (1 x 10(7) amastigotes i.c./hamster) was given in between two doses of the compounds. One of the glycopeptides, CDRI comp. 86/448, has been found to be significantly more potent than MDP, effecting 92% inhibition of the challenge dose, whereas MDP produced only 26.5% inhibition. The effect of comp. 86/448 lasted until day 7 of challenge. The efficacy of sodium stibogluconate was appreciably improved in hamsters treated with comp. 86/448.     

Transport of oxygen through membranes containing haemoglobin solutions

Zusammenfassung Die Scholanderschen Befunde über den Sauerstofftransport durch Hämoglobinlösungen werden auf der Basis der irreversiblen Thermodynamik behandelt.     

Eine neue Gruppe hochwirksamer Lokalanästhetika

Summary Highly active and relatively little toxic local anesthetics from the group of diethylaminoethylesters of alkoxydiphenylcarbamic acids were developed. The substances were tested for local anesthetic activity in surface and infiltration anesthesia.     

A simple method for cultivating the early chick embryo in vitro

Summary A method for cultivating the early chick embryo in an artificial medium has been developed that permits the determination of the stage at the onset of the treatment and the continuous observation of the embryogenesis.Kungliga Fysiografiska Sällskapet, Lund, supported this work.     

Development of carbon composite iron ore micropellets by using the microfines of iron ore and carbon-bearing materials in iron making

Iron ore microfines and concentrate have very limited uses in sintering processes. They are used in pelletization; however, this process is cost intensive. Furthermore, the microfines of non-coking coal and other carbon-bearing materials, e.g., blast-furnace flue dust (BFD) and coke fines, are not used extensively in the metallurgical industry because of operational difficulties and handling problems. In the present work, to utilize these microfines, coal composite iron oxide micropellets (2-6 mm in size) were produced through an innovative technique in which lime and molasses were used as binding materials in the micropellets. The micropellets were subsequently treated with CO₂ or the industrial waste gas to induce the chemical bond formation. The results show that, at a very high carbon level of 22wt% (38wt% coal), the cold crushing strength and abrasion index of the micropellets are 2.5-3 kg/cm2 and 5wt%-9wt%, respectively; these values indicate that the pellets are suitable for cold handling. The developed micropellets have strong potential as a heat source in smelting reduction in iron making and sintering to reduce coke breeze. The micropellets produced with BFD and coke fines (8wt%-12wt%) were used in iron ore sintering and were observed to reduce the coke breeze consumption by 3%-4%. The quality of the produced sinter was at par with that of the conventional blast-furnace sinter.