The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

Simultaneous removal of cyanobacterial blooms and production of clean water by coupling flocculation with a rotary drum filter

Environmental Science and Pollution Research - A mechanical harvesting technology based on coupling flocculation with a rotary drum filter (RDF, 35-μm) was applied to remove cyanobacterial...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Effect of pressure and atmosphere during hydrothermal treatment on the properties of sewage sludge-derived solid fuel

Journal of Material Cycles and Waste Management - Efforts to improve the performance of hydrothermal treatment (HT) in producing high-quality solid fuel from sewage sludge were carried out by...     

Approach to the management of magnesium slag via the production of Portland cement clinker

Journal of Material Cycles and Waste Management - This work aims to develop another approach to the management of magnesium slag (MS) via the production of Portland cement clinker. Thus, 0, 10, 20,...     

大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

南京典型站点春季大气颗粒物数谱分布特征

利用TSI公司的APS和SMPS系统,于2017年4月在江苏省环境监测中心点位连续一个月进行大气颗粒物数谱观测,结果表明,南京市春季典型月份大气颗粒物数浓度和体积浓度均值分别为1.64×104cm~(-3)和1.65×106μm~3/m~3;核模态、爱根核膜态、积聚模态和粗粒子模态数浓度占比分别为22.72%,53.52%,23.72%和0.05%,体积浓度占比分别为0.01%,1.76%,55.82%和42.41%;颗粒物数浓度平均日变化呈现双峰结构;PM_(2.5)体积浓度和质量浓度具有高度相关性;存在明显的新生粒子事件,3~10 nm颗粒物数浓度小时均值短时7 500 cm~(-3)。     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

基于探索性数据分析的汉丰湖富营养化驱动因子研究

为了探究汉丰湖富营养化驱动因子和营养状况，基于2014年水质监测数据，应用探索性数据分析方法初步研究了汉丰湖水动力条件与环境因子的相关性、水质主成分、相关环境因子熵权和营养健康指数。回归分析结果表明：水位与透明度呈正相关，流量与DO呈负相关，与流速呈负相关的因子为Chla、CODMn、NH+4-N和DTP；主成分分析提取的3个主成分分别反映了营养盐、有机污染以及藻类信息；DO、TN和TP的熵权表明汉丰湖水体的富营养状况受制于耗氧有机污染和氮、磷营养盐；营养健康指数S1>S3>S6（湖心）>S7（湖尾）>S5（湖首）>S4>S2。汉丰湖水体营养状况介于中营养到轻富营养，其中南河营养状态较高，湖心营养程度高于湖首和湖尾。减少有机污染物、营养盐的输入和改善局部水域的水动力条件可抑制藻类生长，有利于防治富营养化。 关键词： 探索性数据分析；汉丰湖；富营养化；驱动因子；水动力条件；主成分；熵权；营养健康指数     

异戊醇低压热解的同步辐射真空紫外光电离质谱研究

作为新兴生物燃料,大分子醇类燃料在低压下的火灾安全基础迫切需要得到深入研究。热解过程作为火灾过程的初始阶段直接控制着火过程,火灾中碳烟颗粒的产生也依赖于热解反应,因此可燃物的低压热解研究在其低压火灾基础研究中具有重要意义。利用同步辐射真空紫外光电离质谱方法研究了异戊醇在0.2atm下的流动反应器热解,探测到了20余种热解产物,包括烯丙基自由基和C_4H_8O、C_5H_8、C_6H_6等同分异构体,并测量了其摩尔分数。基于实验结果,对燃料分解路径和主要产物的生成及消耗路径进行了探讨。与本组之前正戊醇热解实验的对比表明,由于存在支链结构,异戊醇在热解中比正戊醇更容易产生戊烯、丁烯和丙烯,但更少地产生乙烯。此外,异戊醇在热解中能够生成更多的丙炔和丙二烯等环状化合物前驱体,令其苯和1,3-环戊二烯的生成量更高,表明异戊醇比正戊醇更易于生成多环芳烃和碳烟。