Ovariectomy predisposes female rats to fine particulate matter exposure’s effects by altering metabolic,oxidative, pro-inflammatory,and heat-shock protein levels

Environmental Science and Pollution Research - The reduction of estrogen levels, as a result of menopause, is associated with the development of metabolic diseases caused by alterations in...     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Lake fish as the main contributor of internal dose to lakeshore residents in the Chernobyl contaminated area

Two field expeditions in 1996 studied 137Cs intake patterns and its content in the bodies of adult residents from the village Kozhany in the Bryansk region, Russia, located on the shore of a drainless peat lake in an area subjected to significant radioactive contamination after the 1986 Chernobyl accident. The 137Cs contents in lake water and fish were two orders of magnitude greater than in local rivers and flow-through lakes, 10 years after Chernobyl radioactive contamination, and remain stable. The 137Cs content in lake fish and a mixture of forest mushrooms was between approximately 10-20 kBq/kg, which exceeded the temporary Russian permissible levels for these products by a factor of 20-40. Consumption of lake fish gave the main contribution to internal doses (40-50%) for Kozhany village inhabitants Simple countermeasures, such as Prussian blue doses for dairy cows and pre-boiling mushrooms and fish before cooking, halved the 137Cs internal dose to inhabitants, even 10 years after the radioactive fallout.     

Prediction of Leachate Level in Kimpo Metropolitan Landfill Site by Total Water Balance

Kimpo metropolitan landfill has received various kinds of wastessince January 1992. The leachate level was measured to be 10.3 m in May 1995 and the level increased to 12.2 m in August 1996. Therefore, to prove the reason for the increasing leachate level, we calibrated hydraulic conductivity of each waste andintermediate layer using the HELP (Hydrologic Evaluation ofLandfill Performance) model. The leachate generation data measured from February 1993 to October 1995 was used in the model calibration. As a result of a model calibration, we obtained anaverage infiltration ratio and used this in analysis of the total water balance to predict elevation of leachate level. Main causes of the elevation of the leachate level were the high water content of the waste and the degradation of the leachate-drainage system caused by the subsidence of a naturalbarrier layer.     

Biological Air Quality Monitoring: a Review

Air quality monitoring is currently ensured by captors measuring few physicochemical parameters, then they cannot evaluate unforeseen compounds and the interaction effects of pollutants. On the contrary, the use of bioindicators can answer these problems. Among them, plants are used in two ways:1) Passive bioindicators: trees, lichens and mosses are used to determine the distribution and even the contaminants long-term effects on vast zones and, possibly, the concentrations of pollutants to which they were exposed.2) Active bioindicators: tobacco and mosses make available the defective zones in plants and enable determination of deposition fluxes.Moreover, techniques based on biomarkers identification should increase the answer's sensitivity. However, the plants present the disadvantage of being unable to provide a response in a time lapse comparable with that of the on-line analysers. Lastly, the development of tools using animal cells should allow, in the near future, to measure the total polluting load under conditions close to those of the routine techniques. Then, the real impact of the contaminant on public health could be approached.     

Epiphytic lichens as biomonitors of atmospheric pollution in Slovenian forests

Two country-wide surveys using epiphytic lichens as biomonitors of atmospheric pollution carried out during 2000 and 2001 in Slovenia were compared with surveys in 1991 and 1992. In the first survey, epiphytic lichen cover was studied in more than 500 plots of the 4 x 4 km national grid carried out within the framework of forest decline inventories. In the second survey, the epiphytic lichen Hypogymnia physodes (L.) Nyl., was collected on a 16 x 16 km bioindication grid and analysed for S, N, As, Br, Ce, Cd, Cr, K, La, Mo, Rb, Sb, Th, U and Zn contents. Only 'forested area' sampling points were included in the present study. Lichen cover was low, with about 70% of plots with less than 10% foliose lichen cover. No relationship was found between Hypogymnia trace element, N and S concentrations and foliose epiphytic lichen cover.     

A GIS-based approach to spatio-temporal analysis of environmental pollution in urban areas: A case study of Prague's environment extended by LIDAR data

Environmental pollution of urban areas is one of key factors that state authorities and local agencies have to consider in the decision-making process. To find a compromise among many criteria, spatial analysis extended by geostatistical methods and dynamic models has to be carried out. In this case, spatial analysis includes processing of a wide range of air, water and soil pollution data and possibly noise assessment and waste management data. Other spatial inputs consist of data from remote sensing and GPS field measurements. Integration and spatial data management are carried out within the framework of a geographic information system (GIS). From a modeling point of view, GIS is used mainly for the preprocessing and postprocessing of data to be displayed in digital map layers and visualized in 3D scenes. Moreover, for preprocessing and postprocessing, deterministic and geostatistical methods (IDW, ordinary kriging) are used for spatial interpolation; geoprocessing and raster algebra are used in multi-criteria evaluation and risk assessment methods. GIS is also used as a platform for spatio-temporal analyses or for building relationships between the GIS database and stand-alone modeling tools. A case study is presented illustrating the application of spatial analysis to the urban areas of Prague. This involved incorporating environmental data from monitoring networks and field measurements into digital map layers. Extra data inputs were used to represent the 3D concentration fields of air pollutants (ozone, NO₂) measured by differential absorption LIDAR. ArcGIS was used to provide spatial data management and analysis, extended by modeling tools developed internally in the ArcObjects environment and external modules developed with MapObjects. Ordinary kriging methods were employed to predict ozone concentrations in selected 3D locations together with estimates of variability. Higher ozone concentrations were found above crossroads with their heavy traffic than above the surrounding areas. Ozone concentrations also varied with height above the digital elevation model. Processed data, spatial analysis and models are integrated within the framework of the GIS project, providing an approach that state and local authorities can use to address environmental protection issues.     

Lichens as integrating air pollution monitors

In this work an attempt to combine the results of lichen mapping with the quantitative levels of certain trace elements in Hypogymnia physodes (L.) Nyl. collected on a national scale is presented. An Index of Atmospheric Purity (IAP) was calculated using a simple method of mapping lichens based on the assessment of the cover and frequency of crustose, foliose and fruticose lichens on different tree species. For determination of trace elements in lichens k0-instrumental neutron activation analysis was used. From the IAP results it can be concluded that the epiphytic lichen flora look quite poor with more than 70% of the territory in the fourth and third classes, which represent highly polluted and moderately polluted air. By comparing IAP results with elemental levels in H. physodes using multivariate statistical methods it was found that the elemental levels do not have a direct negative effect on the diversity of lichens but can help in identification of the type of possible pollution sources and their origin.