Lithology-dependent seismic anisotropic amplitude variation with offset correction in transversely isotropic media

Analysis of amplitude variation with offset is an essential step for reservoir characterization. For an accurate reservoir characterization, the amplitude obtained with an isotropic assumption of the reservoir must be corrected for the anisotropic effects. The objective is seismic anisotropic amplitude correction in an effective medium, and, to this end, values and signs of anisotropic parameter differences (Δδ and Δε) across the reflection interfaces are needed. These parameters can be identified by seismic and well log data. A new technique for anisotropic amplitude correction was developed to modify amplitude changes in seismic data in transversely isotropic media with a vertical axis of symmetry. The results show that characteristics of pre-stack seismic data, that is, amplitude variation with offset gradient, can be potentially related to the sign of anisotropic parameter differences (Δδ and Δε) between two layers of the reflection boundary. The proposed methodology is designed to attain a proper fit between modelled and observed amplitude variation with offset responses, after anisotropic correction, for all possible lithofacies at the reservoir boundary. We first estimate anisotropic parameters, that is, δ and ε, away from the wells through Backus averaging of elastic properties resulted from the first pass of isotropic pre-stack seismic inversion, on input data with no amplitude correction. Next, we estimate the anisotropic parameter differences at reflection interfaces (values and signs of Δδ and Δε). We then generate seismic angle gather data after anisotropic amplitude correction using Rüger's equation for the P-P reflection coefficient. The second pass of isotropic pre-stack seismic inversion is then performed on the amplitude-corrected data, and elastic properties are estimated. Final outcome demonstrates how introduced methodology helps to reduce the uncertainty of elastic property prediction. Pre-stack seismic inversion on amplitude-corrected seismic data results in more accurate elastic property prediction than what can be obtained from non-corrected data. Moreover, a new anisotropy attribute (ν) is presented for improvement of lithology identification.     

Studies on Schumann Resonance Phenomena and Some Recent Advancements

Geomagnetism and Aeronomy - Discrete spectra of frequencies at 8, 14, 20, 26, … Hz are generated by electromagnetic emission from lightning sources and can be regarded as excitation of AC...     

Spatio‐temporal prediction of land surface temperature using semantic kriging

Spatio‐temporal prediction and forecasting of land surface temperature (LST) are relevant. However, several factors limit their usage, such as missing pixels, line drops, and cloud cover in satellite images. Being measured close to the Earth's surface, LST is mainly influenced by the land use/land cover (LULC) distribution of the terrain. This article presents a spatio‐temporal interpolation method which semantically models LULC information for the analysis of LST. The proposed spatio‐temporal semantic kriging (ST‐SemK) approach is presented in two variants: non‐separable ST‐SemK (ST‐SemK_NSep) and separable ST‐SemK (ST‐SemK_Sep). Empirical studies have been carried out with derived Landsat 7 ETM+ satellite images of LST for two spatial regions: Kolkata, India and Dallas, Texas, U.S. It has been observed that semantically enhanced spatio‐temporal modeling by ST‐SemK yields more accurate prediction results than spatio‐temporal ordinary kriging and other existing methods.     

Classification of glacial lakes using integrated approach of DFPS technique and gradient analysis using Sentinel 2A data

It is important to identify and locate glacial lakes for assessing any potential hazard. This study presents a combination of semi-automatic method Double-Window Flexible Pace Search (DFPS) and edge detection technique to identify glacial lakes using Sentinel 2A satellite data. Initially, Normalized Difference Water Index (NDWI) has been used to identify water and non-water areas, while DFPS and Edge detection technique has been used to identify an optimum threshold value to distinguish between water and shadow areas. The optimal threshold from DFPS process is 0.21, while threshold value of gradient magnitude using edge detection process is 0.318. The number of glacial lakes identified using the above algorithm is in close agreement with previously published results on glacial lakes in Gangotri glacier using different techniques. Thus, a combination of DFPS and edge detection process has successfully segregated glacial lakes from other features present in Gangotri glacier.     

Biosedimentary record of postglacial coastal dynamics: high‐resolution sequence stratigraphy from the northern Tuscan coast (Italy)

Integrating analysis of the benthic palaeoecological record with multivariate ordination techniques represents a powerful synergy able to provide an improved characterization of coastal depositional facies in a sequence stratigraphical perspective. Through quantitative analysis of benthic foraminifer, ostracod and mollusc associations from the postglacial succession of Core M3 (Arno coastal plain, Tuscany, Italy), and application of detrended correspondence analysis (DCA) to the mollusc sub‐data set, we offer a refined picture of stratigraphical variations in faunal content from a paralic depositional setting, and reconstruct the palaeoenvironmental gradients that account for such variations. Despite distinct ecological behaviours, and taphonomic and sedimentological constraints, a strong ecological control on meio‐ and macrofaunal biofacies and taxa turnover is documented across the study succession. Amongst all possible mechanisms that may play a role in ‘shaping’ fossil distribution, the ecological signal driven by salinity represents the most prominent factor controlling the composition of fossil associations in the cored succession. Molluscs can even provide outstanding quantitative estimates of palaeosalinity along the sampled core. When plotted stratigraphically, the three fossil sub‐data sets show consistent patterns of vertical evolution that enable prompt identification of the key surfaces for sequence stratigraphical interpretation in otherwise lithologically indistinguishable deposits. The concomitant maximum richness of species with strong marine affinity, paralleled by the highest DCA salinity estimates, allows recognition of the maximum flooding zone, dated to ～7.7 cal. ka BP, within a homogeneous succession of outer lagoon clays. These clays are sandwiched between early transgressive, swamp to inner lagoon deposits and overlying prograding coastal?alluvial plain facies.     

Probing Statistical Isotropy of Cosmological Radio Sources using Square Kilometre Array

There currently exist many observations which are not consistent with the cosmological principle. We review these observations with a particular emphasis on those relevant for the Square Kilometre Array (SKA). In particular, several different data sets indicate a preferred direction pointing approximately towards the Virgo cluster. We also observe a hemispherical anisotropy in the Cosmic Microwave Background radiation (CMB) temperature fluctuations. Although these inconsistencies may be attributed to systematic effects, there remains the possibility that they indicate new physics and various theories have been proposed to explain them. One possibility, which we discuss in this review, is the generation of perturbation modes during the early pre-inflationary epoch, when the Universe may not obey the cosmological principle. Better measurements will provide better constraints on these theories. In particular, we propose measurement of the dipole in number counts, sky brightness, polarized flux and polarization orientations of radio sources. We also suggest test of alignment of linear polarizations of sources as a function of their relative separation. Finally we propose measurement of hemispherical anisotropy or equivalently dipole modulation in radio sources.     

From Nearby Low Luminosity AGN to High Redshift Radio Galaxies: Science Interests with Square Kilometre Array

We present detailed science cases that a large fraction of the Indian AGN community is interested in pursuing with the upcoming Square Kilometre Array (SKA). These interests range from understanding low luminosity active galactic nuclei in the nearby Universe to powerful radio galaxies at high redshifts. Important unresolved science questions in AGN physics are discussed. Ongoing low-frequency surveys with the SKA pathfinder telescope GMRT, are highlighted.     

Cobalt‐Bearing Grunerite in the Metamorphosed Banded Iron Formation in Orissa,India

Banded iron formation (BIF) comprising high grade iron ore are exposed in Gorumahisani‐Sulaipat‐Badampahar belt in the east of North Orissa Craton, India. The ores are multiply deformed and metamorphosed to amphibolite facies. The mineral assemblage in the BIF comprises grunerite, magnetite/martite/goethite and quartz. Relict carbonate phases are sometimes noticed within thick iron mesobands. Grunerite crystals exhibit needles to fibrous lamellae and platy form or often sheaf‐like aggregates in linear and radial arrangement. Accicular grunerite also occur within intergranular space of magnetite/martite. Grunerite needles/accicules show higher reflectivity in chert mesoband and matching reflectance with that of adjacent magnetite/martite in iron mesoband. Some grunerite lamellae sinter into micron size magnetite platelets. This grunerite has high ferrous oxide and cobalt oxide content but is low in Mg‐ and Mn‐oxide compared to the ones, reported from BIFs, of Western Australia, Nigeria, France, USA and Quebec. The protolith of this BIF is considered to be carbonate containing sediments, with high concentrations of Fe and Si but lower contents of cobalt and chromium ± Mg, Mn and Ni. During submarine weathering quartz, sheet silicate (greenalite) and Fe‐Co‐Cr (Mg‐Mn‐Ni)‐carbonate solid solution were formed. At the outset of the regional metamorphic episode grunerite, euhedral magnetite and recrystalized quartz were developed. Magnetite was grown at the expense of carbonate and later martitized under post‐metamorphic conditions. With the increasing grade of metamorphism greenalite transformed to grunerite.     

Radon emanation of heterogeneous basin deposits in Kathmandu Valley,Nepal

Effective radium-226 concentration (EC_Ra) has been measured in soil samples from seven horizontal and vertical profiles of terrace scarps in the northern part of Kathmandu Valley, Nepal. The samples belong to the Thimi, Gokarna, and Tokha Formations, dated from 50 to 14 ky BP, and represent a diverse fluvio-deltaic sedimentary facies mainly consisting of gravelly to coarse sands, black, orange and brown clays. EC_Ra was measured in the laboratory by radon-222 emanation. The samples (n = 177) are placed in air-tight glass containers, from which, after an accumulation time varying from 3 to 18 days, the concentration of radon-222, radioactive decay product of radium-226 and radioactive gas with a half-life of 3.8 days, is measured using scintillation flasks. The EC_Ra values from the seven different profiles of the terrace deposits vary from 0.4 to 43 Bq kg^?1, with profile averages ranging from 12 ± 1 to 27 ± 2 Bq kg^?1. The values have a remarkable consistency along a particular horizon of sediment layers, clearly demonstrating that these values can be used for long distance correlations of the sediment horizons. Widely separated sediment profiles, representing similar stratigraphic positions, exhibit consistent EC_Ra values in corresponding stratigraphic sediment layers. EC_Ra measurements therefore appear particularly useful for lithologic and stratigraphic discriminations. For comparison, EC_Ra values of soils from different localities having various sources of origin were also obtained: 9.2 ± 0.4 Bq kg^?1 in soils of Syabru–Bensi (Central Nepal), 23 ± 1 Bq kg^?1 in red residual soils of the Bhattar-Trisuli Bazar terrace (North of Kathmandu), 17.1 ± 0.3 Bq kg^?1 in red residual soils of terrace of Kalikasthan (North of Trisuli Bazar) and 10 ± 1 Bq kg^?1 in red residual soils of a site near Nagarkot (East of Kathmandu). The knowledge of EC_Ra values for these various soils is important for modelling radon exhalation at the ground surface, in particular in the vicinity of active faults. Importantly, the study also reveals that, above numerous sediments of Kathmandu Valley, radon concentration in dwellings can potentially exceed the level of 300 Bq m^?3 for residential areas; a fact that should be seriously taken into account by the governmental and non-governmental agencies as well as building authorities.