A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

Experimental solidification of anhydrous latitic and trachytic melts at different cooling rates: The role of nucleation kinetics

Two sets of cooling experiments were run at atmospheric conditions for two anhydrous starting latitic and trachytic melts: 1) five cooling rates (25, 12.5, 3, 0.5, and 0.125 °C/min) between 1300° and 800 °C, and 2) a 0.5 °C/min cooling rate from 1300 °C with quench temperatures at 1200°, 1100°, 1000° and 900 °C. Trachytic run-products are invariably glassy. Nucleation is also suppressed in the latitic run-products at the three highest cooling rates. Conversely, in the 0.5 and 0.125 °C/min runs, latites have a crystal content of  90 vol.%. The phases are: plagioclase, clinopyroxene, glass and iron-bearing oxide (in order of abundance). The variable quench temperatures, investigated by coupling experiments with Pt wire and Pt capsule sample containers in set 2, again did not produce crystallization of trachyte, whereas latitic samples are characterized by  10 vol.% of oxides, pyroxenes and plagioclase (in order of appearance), at temperature < 1000 °C. Effects of (preferential) heterogeneous nucleation on sample holders, of superheating degree, and chemical species loss during cooling are absent for both melt compositions. The difference of solidification paths between these two silicate melts can be ascribed only to their small chemical differences. In comparison with calculated equilibrium conditions all the experimental latitic and trachytic run-products revealed strong kinetic effects, interpretable in the light of the nucleation theory. The glass-forming ability (GFA) of trachyte is higher, whereas their critical cooling rate (Rc) is lower (< 0.125 °C/min), in comparison to latitic melts (Rc > 0.5 °C/min). The experimental results carried out in this study can be applied to lava flows and domes; trachytic lavas are able to flow for longer period with respect to latitic ones in a metastable condition. Glass-rich terrestrial lavas, i.e. obsidians, can be the result of sluggish nucleation kinetics due to the relative high polymerisation of evolved silicate melts.     

Geophysical evidence of mud diapirism on the Mediterranean Ridge accretionary complex

Mud volcanoes, mud cones, and mud ridges have been identified on the inner portion of the crestal area, and possibly on the inner escarpment, of the Mediterranean Ridge accretionary complex. Four areas containing one or more mud diapirs have been investigated through bathymetric profiling, single channel seismic reflection profiling, heat flow measurements, and coring. A sequence of events is identified in the evolution of the mud diapirs: initially the expulsion on the seafloor of gasrich mud produces a seafloor depression outlined in the seismic record by downward dip of the host sediment reflectors towards the mud conduit; subsequent eruptions of fluid mud may create a flat topped mud volcano with step-like profile; finally, the intrusion of viscous mud produces a mud cone.The origin of the diapirs is deep within the Mediterranean Ridge. Although a minimum depth of about 400 m below the seafloor has been computed from the hydrostatic balance between the diapiric sediments and the host sediments, a maximum depth, suggested by geometric considerations, ranges between 5.3 and 7 km. The presence of thermogenic gas in the diapiric sediments suggests a better constrained origin depth of at least 2.2 km.The heat flow measured within the Olimpi mud diapir field and along a transect orthogonal to the diapiric field is low, ranging between 16 ± 5 and 41 ± 6 mW m^–2. Due to the presence of gas, the thermal conductivity of the diapiric sediments is lower than that of the host hemipelagic oozes (0.6–0.9 and 1.0–1.15 W m^–1 K^–1 respectively).We consider the distribution of mud diapirs to be controlled by the presence of tectonic features such as reverse faults or thrusts (inner escarpment) that develop where the thickness of the Late Miocene evaporites appears to be minimum. An upward migration through time of the position of the décollement within the stratigraphic column from the Upper Oligocene (diapiric sediments) to the Upper Miocene (present position) is identified.     

Vertical Distribution of Meiobenthos in Bathyal Sediments of the Eastern Mediterranean Sea: Relationship with Labile Organic Matter and Bacterial Biomasses

Abstract. Quantitative information on the vertical distribution of meiofaunal abundances and biomass were obtained from samples collected at 3 bathyal stations in the Eastern Mediterranean Sea located at the same depth but characterized by different food supply. Vertical distribution patterns of nieiofauna were investigated in relation to the biochemical composition of the sediment organic matter (proteins, carbohydrates, and lipids) and compared to benthic bacterial standing stocks. No significant relationship between bacteria and meiofauna was found, whereas a significant relationship between protein and lipid concentrations and total meiofauna density was observed. These data suggest that labile organic matter. considered as material readily aVdihbk to benthic consumers, may be an important factor regulating meiofaunal abundance and vertical distribution in deep-sea sediments.     

Methodical series tests for fuller ship hull forms

In recent years many fuller ship hull forms have been designed and constructed in various shipbuilding countries, but the data available for the development of the fuller forms are inadequate from the point of view of preliminary ship design. In this paper the authors describe how they have systematically tested vessel forms of block coefficients ranging from 0.80 to 0.90. The analysis and presentation of the test results have been made in such a manner that designers can produce hull forms like those of tankers and other bulk carriers quickly and reliably.     

Dynamics and Variability of Terra Nova Bay Polynya

Abstract. We present a process study on the dynamics and variability of the Terra Nova Bay polynya in the western sector of the Ross Sea. The air-sea heat exchange is known to be particularly large in polynya during the winter, when differences between air and sea temperatures are large. We apply a 1-D model (Pease, 1987; Van Woert, 1999a, 1999b), which is modified in the latent heat parameterisation in order to account for time-dependent relative humidity and cloud coverage. Furthermore, the Ice Collection Depth is correlated linearly with a variable wind speed. The model is forced with two different meteorological data sets: the operational analysis of the European Center for Medium Range Weather Forecasts atmospheric data set and the meteorological parameters measured by an Automatic Weather Station located on the coast of Terra Nova Bay. The results are compared in terms of polynya extension, ice, and High Salinity Shelf Water production. According to the two different wind velocities, the results obtained from the different data sets clearly differ. Qualitatively, however, the results are in good agreement.     

A depocenter of organic matter at 7800 m depth in the SE Pacific Ocean

The Atacama trench, the deepest ecosystem of the southern Pacific Ocean (ca. 8000 m depth) was investigated during the Atacama Trench International Expedition. Sediments, collected at three bathyal stations (1040–1355 m depth) and at a hadal site (7800 m) were analyzed for organic matter quantity and biochemical composition (in terms of phytopigments, proteins, carbohydrates and lipids), bacterial abundance, biomass and carbon production and extracellular enzymatic activities. Functional chlorophyll-a (18.0±0.10 mg m⁻²), phytodetritus (322.2 mg m⁻²) and labile organic carbon (16.9±4.3 g C m⁻²) deposited on surface sediments at hadal depth (7800 m) reached concentrations similar to those encountered in highly productive shallow coastal areas. High values of bacterial C production and aminopeptidase activity were also measured (at in situ temperature and 1 atm). The chemical analyses of the Atacama hadal sediments indicate that this trench behaves as a deep oceanic trap for organic material. We hypothesize that, despite the extreme physical conditions, benthic microbial processes might be accelerated as a result of the organic enrichment.     

Frequency-spectra solutions for multiperiodic variable stars: Analysis and interpretation of artificial data

An accurate and extensive analysis on the present possibility of obtaining definite, unambiguous frequency-spectra solutions for multiperiodic -Scuti stars has been performed using artificial data. Some convenient photometric data sampling techniques have been adopted to produce very realistic light curves, with gaps and noise and subsequently critically analyzed. Useful suggestions about those to adopt in order to detect very low-amplitude components of the signal have been inferred.The results obtained point out the need of extensive devoted series of measurements, spread over a very long time span and also over a wide baseline of observers.     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

Crystal chemistry of a highly disordered Mg-Al natural spinel

Summary A Mg-Al spinel from a xenolith found in the Sacrofano volcanic area (Latium, Italy) was investigated by X-ray single crystal diffraction and electron microprobe. Its main structural parameters were: a₀ = 8.0922(3) Å and the oxygen coordinate u = 0.26213(4), which gave to tetrahedral and octahedral bond distances of 1.9220(6) Å and 1.9299(3) Å respectively. Cation distribution, obtained from structural and chemical data, showed a very high Mg-Al disorder, with an Al(T) content of 0.205 and an inversion parameter, i, of about 0.23. Comparison with the cation distribution of a spinel with similar chemical composition but occurring in chlorite schists (Shishimsk Mountains, Urals, Russia) with a₀ = 8.1003(3) Å and u=0.26330(3), and with data from the literature concerning spinels from metamorphosed limestones (Kalkbro, Sweden) and websteritic dikes (Balmuccia, Italy), all characterized by much lower Mg-Al disorder (i about 0.13–0.12), suggests a completely different thermal history, with rapid cooling rates and consequent high closure temperature of intracrystalline exchange, consistent with the Sacrofano geological environment.

---

Kristallchemie eines stark ungeordneten, natürlichen Mg-Al-Spinells

Zusammenfassung Ein Mg-Al-Spinell aus einem Xenolith des Vulkangebiets von Sacrifano (Latium, Italien) wurde mit Röngten-Einkristallmethoden und der Elektronenmikrosonde untersucht. Die wichtigsten Strukturparameter sind a_o = 8,0922(3) Å und die Sauerstoffkoordinate u = 0,26213(4), was zu den tetraedrischen und oktaedrischen Bindungsabständen von 1,9220(6) Å bzw. 1,9299(3) Å führt. Die aus den strukturellen und chemischen Daten erhaltene Kationenverteilung zeigt eine sehr starke Unordnung Mg-Al mit einem Al (T)-Gehalt von 0,205 und einem Inversionsparameteri von ca. 0,23. Der Vergleich mit der Kationenverteilung eines Spinells ähnlicher chemischer Zusammensetzung, aber aus Chloritschiefern (Schischimsk-Berge, Ural, Rußland) mit a₀ = 8,1003(3) Å und u=0,26330(3), sowie mit Literaturdaten über Spinelle aus metamorphen Kalken (Kalkbro, Schweden) und websteritischen Gängen (Balmuccia, Italien), die alle durch eine viel geringere Mg-Al-Unordnung charakterisiert sind (i etwa 0,13–0,12), weist auf eine völlig andere thermische Geschichte hin, und zwar mit rascher Abkühlungsgeschwindigkeit und hoher Schließungstemperatur des intrakristallinen Austausches, was mit den geologischen Verhältnissen von Sacrofino in Übereinstimmung steht.