Low‐cost monitoring of snow height and thermal properties with inexpensive temperature sensors

Small, self‐recording temperature sensors were installed at several heights along a metal rod at five locations in a case study catchment. For each sensor, the presence or absence of snow cover was determined on the basis of its insulating effect and the resulting reduction of the diurnal temperature oscillations. Sensor coverage was then converted into a time series of snow height for each location. Additionally, cold content was calculated. Snow height and cold content provide valuable information for spring flood prediction. Good agreement of estimated snow heights with reference measurements was achieved and increased discharge in the study catchment coincided with low cold content of the snow cover. The results of the proposed distributed assessment of snow cover and snow state show great potential for (i) flood warning, (ii) assimilation of snow state data and (iii) modelling snowmelt process. Copyright © 2010 John Wiley & Sons, Ltd.     

Increase in Dissolved Silica of Rivers Due to a Volcanic Eruption in an Estuarine Bay (Sorsogon Bay,Philippines)

Mount Bulusan, the Philippines’ fourth most active volcano, erupted in February 21, 2011, sending volcanic ash and pyroclastic materials to its surrounding rivers. The waters drained into the estuary of harmful algal blooms plagued Sorsogon Bay. We aim to determine the impact of the 2011 volcanic eruption and the preceding volcanic ash emissions to the dissolved silica concentration of rivers draining the flanks of Mt. Bulusan and its possible implications to the phytoplankton assemblage of the bay. Six river water sampling periods from August 2010 to October 2012 overlapped with Mt. Bulusan’s active phase of volcanism. Our data shows that mean river silica from pre-eruption levels of ~?500 μM increased by more than 200% during and post-eruption. Highest Si concentration of 2270 μM was measured from Cadacan River in August 2011. Here, we argue that the sustained general increase of dissolved silica is due to the silica-containing materials from Mt. Bulusan’s eruption and that their concentration in river waters is also a function of watershed lithology and precipitation. Increase in dissolved silica and other nutrients caused a shift to diatom domination and, possibly, termination of Pyrodinium bahamense var. compressum blooms. Silica load increase in embayments is a natural process that controls the dominance of algae. Our study also highlights the importance of Philippine rivers to the global ocean silica budget as a function of high precipitation, tectonics in general, and volcanism in particular.     

Process identification at a slow‐moving landslide in the Vorarlberg Alps

A fine‐grained slope that exhibits slow movement rates was investigated to understand how geohydrological processes contribute to a consecutive development of mass movements in the Vorarlberg Alps, Austria. For that purpose intensive hydrometeorological, hydrogeological and geotechnical observations as well as surveying of surface movement rates were conducted during 1998–2001. Subsurface water dynamics at the creeping slope turned out to be dominated by a three‐dimensional pressure system. The pressure reaction is triggered by fast infiltration of surface water and subsequent lateral water flow in the south‐western part of the hillslope. The related pressure signal was shown to propagate further downhill, causing fast reactions of the piezometric head at 5·5 m depth on a daily time scale. The observed pressure reactions might belong to a temporary hillslope water body that extends further downhill. The related buoyancy forces could be one of the driving forces for the mass movement. A physically based hydrological model was adopted to model simultaneously surface and subsurface water dynamics including evapotranspiration and runoff production. It was possible to reproduce surface runoff and observed pressure reactions in principle. However, as soil hydraulic functions were only estimated on pedotransfer functions, a quantitative comparison between observed and simulated subsurface dynamics is not feasible. Nevertheless, the results suggest that it is possible to reconstruct important spatial structures based on sparse observations in the field which allow reasonable simulations with a physically based hydrological model. Copyright © 2004 John Wiley & Sons, Ltd.     

南海东沙东北部甲烷缺氧氧化作用的生物标志化合物及其碳同位素组成

南海东沙东北部碳酸盐岩和泥质沉积物中的生物标志化合物组合及其碳同位素组成分析表明,研究区内甲烷缺氧氧化作用(anaerobic oxidation of methane-AOM)发育.研究区内碳酸盐岩中含丰富的AOM标志化合物,2,6,11,15-四甲基十六烷(Crocetane-Cr.)、2,6,10,15,19-五甲基番茄烷(Pentamethylicosane-PMI)和2,6,10,15,19,23-六甲基二十四烷(Squalane-Sq角鲨烷)的13C亏损强烈(δ13C值介于-74.2‰~-119.0‰PDB之间),表明碳酸盐岩形成于AOM,同时反映该研究区曾发生过强烈、持续的富CH₄流体释放活动.柱状泥质沉积物中,AOM生物标志化合物在硫酸岩-甲烷过渡带(SMI-Sulfate-Methane Interface)边界附近相对丰度高,SMI之上样品中含量低,或未检出,表明现代环境在SMI附近有大量嗜甲烷微生物生长,使得深部上升的甲烷被大量消耗,很少有甲烷逸出海底.AOM生物标志化合物可用来指示SMI边界.不同站位、不同岩性AOM生物标志化合物组成(包括碳同位素组成)的差异反映了嗜甲烷古细菌组成的不同.     

Sulfurous acid (H2SO3) on Io?

Sulfurous acid (H₂SO₃) has never been characterized or isolated on Earth. This is caused by the unfavorable conditions for H₂SO₃ within Earth's atmosphere due to the high temperatures, the high water content and the oxidizing environment. Kinetic investigations by means of transition state theory showed that the half-life of H₂SO₃ at 300 K is 1 day but at 100 K it is increased to 2.7 billion years. Natural conditions to form H₂SO₃ presumably require cryogenic SO₂ or SO₂/H₂O mixtures and high energy proton irradiation at temperatures around 100 K. Such conditions can be found on the Jupiter moons Io and Europa. Therefore, we calculated IR-spectra of H₂SO₃ which we compared with Galileo's spectra of Io and Europa. From the available data we surmise that H₂SO₃ is present on Io and probably but to a smaller extent on Europa.     

Elektronenstrahl-Mikroanalyse des Meteoriten von Steinbach

Zusammenfassung Eine uns vom Naturhistorischen Museum in Wien freundlicherweise zur Verfügung gestellte Probe des Meteoriten von Steinbach wurde mit einem Elektronenstrahl-Mikroanalysator vom Typ CAMECA qualitativ und quantitativ auf die chemische Zusammensetzung der einzelnen Phasen untersucht.Besonders eingehend wurde dabei die Metallphase analysiert, da diese sich durch die Anwesenheit einer gut ausgebildeten Widmanstättenschen Struktur in Gegenwart von Tridymit als Druckindikator auszeichnet.Die nichtmetallischen Phasen wurden ebenfalls quantitativ bestimmt und ergeben leicht abweichende Ergebnisse von den Analysen vonN. Story-Maskelyne, O. Winkler undF. Heide. Interessant sind vor allem der relativ hohe Mangangehalt in Bronzit und Chromit sowie der Chromgehalt des Troilits.Die Anwendung der neuen Berechnungen über die Abkühlungsgeschichte der Meteoritenmutterkörper vonWood auf unsere quantitativen Analysen ergab eine Abkühlungsgeschwindigkeit von 10°/Million Jahre, was einem Mutterkörper von ca. 50–90 km Durchmesser und einem Zentraldruck von 200 b entspricht.

---

Summary A sample of the meteorite of Steinbach, made available by the Naturhistorisches Museum at Vienna, has been analyzed qualitatively and quantitatively by a CAMECA electron-beam microanalyzer.Detailed examination has been made on the structure of the metal phase, as the presence of a well-grown Widmanstätten-structure in contact with trydimite as a pressure-indicator is a direct proof for the formation of the Widmanstätten-structure without pressure.The nonmetallic phases have been analyzed quantitatively and the results are slightly different from those ofStory-Maskelyne, Winkler andHeide. Very interesting is the relatively high content of manganese in bronzite and chromite, also the chromium content of troilite.The application of the new computations ofWood, dealing with the cooling history of meteorite-parentbodies to our quantitative analyses indicate a cooling rate of 10° C/Million years, according to a parentbody of appr. 50–90 km diameter and a central pressure of appr. 200 b.

---

---

Mit 8 Textabbildungen

---

Herrn Professor Dr.F. Machatschki zum 70. Geburtstag gewidmet.     

Monitoring of atmospheric deposition in European forests and an overview on its implication on forest condition

Forest conditions in Europe have been monitored over 20 years jointly by the International Cooperative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests) and the European Union (EU). Maps for mean bulk SO₄, NO₃ and NH₄ deposition at around 400 intensive monitoring plots in the years 1999–2001, as well as time trends for the period 1996–2001, are presented. Mean bulk SO₄ deposition at 169 plots mostly located in central Europe decreased from 7.4 to 5.8 kgS ha⁻¹ a⁻¹. Mean NH₄ bulk deposition decreased from 6.2 to 5.3 kgN ha⁻¹ a⁻¹. Nitrate bulk deposition fluctuated around 5 kgN ha⁻¹ a⁻¹. On average, throughfall deposition was considerably higher than bulk deposition. Time trends for mean tree crown defoliation as an overall indicator for forest condition show a peak in the mid 1990s for most of the monitored main tree species and a recent increase for the years 2003 and 2004. Multivariate linear regression analyses show some significant relations between deposition and defoliation. These relations depend on the tree species and site characteristics. Effects of deposition are moderated by the influence of biotic stress factors such as insects and fungi and by abiotic stress factors, such as weather.     

The effect of dissolved barium on biogeochemical processes at cold seeps

A numerical model was applied to investigate and quantify the biogeochemical processes fueled by the expulsion of barium and methane-rich fluids in the sediments of a giant cold-seep area in the Derugin Basin (Sea of Okhotsk). Geochemical profiles of dissolved Ba²⁺, Sr²⁺, Ca²⁺, SO₄²⁻, HS⁻, DIC, I⁻ and of calcium carbonate (CaCO₃) were fitted numerically to constrain the transport processes and the kinetics of biogeochemical reactions. The model results indicate that the anaerobic oxidation of methane (AOM) is the major process proceeding at a depth-integrated rate of 4.9 μmol cm⁻² a⁻¹, followed by calcium carbonate and strontian barite precipitation/dissolution processes having a total depth-integrated rate of 2.1 μmol cm⁻² a⁻¹. At the low seepage rate prevailing at our study site (0.14 cm a⁻¹) all of the rising barium is consumed by precipitation of barite in the sedimentary column and no benthic barium flux is produced. Numerical experiments were run to investigate the response of this diagenetic environment to variations of hydrological and biogeochemical conditions. Our results show that relatively low rates of fluid flow (<∼5 cm a⁻¹) promote the dispersed precipitation of up to 26 wt% of barite and calcium carbonate throughout the uppermost few meters of the sedimentary column. Distinct and persistent events (several hundreds of years long) of more vigorous fluid flow (from 20-110 cm a⁻¹), instead, result in the formation of barite-carbonate crusts near the sediment surface. Competition between barium and methane for sulfate controls the mineralogy of these sediment precipitates such that at low dissolved methane/barium ratios (<4-11) barite precipitation dominates, while at higher methane/barium ratios sulfate availability is limited by AOM and calcium carbonate prevails. When seepage rates exceed 110 cm a⁻¹, barite precipitation occurs at the seafloor and is so rapid that barite chimneys form in the water column. In the Derugin Basin, spectacular barite constructions up to 20 m high, which cover an area of roughly 22 km² and contain in excess of 5 million tons of barite, are built through this process. In these conditions, our model calculates a flux of barium to the water column of at least 20 μmol cm⁻² a⁻¹. We estimate that a minimum of 0.44 × 10⁶ mol a⁻¹ are added to the bottom waters of the Derugin Basin by cold seep processes, likely affecting the barium cycle in the Sea of Okhotsk.     

Was a dacite dome implicated in the 9,500 <Emphasis Type="SmallCaps">b.p.</Emphasis> collapse of Mt Ruapehu? A palaeomagnetic investigation

Constraining the process by which volcanoes become unstable is difficult. Several models have been proposed to explain the driving forces which cause volcanic edifices to catastrophically collapse. These include models for destabilisation of volcanic flanks by wedging due to dyke intrusion and the weakening of mechanical properties by pressurisation of pore fluids. It is not known which, if any, of the models are relevant to particular sector collapse events. Recent developments in the palaeomagnetic estimation of emplacement temperatures of volcaniclastic rocks have shown that even relatively low emplacement temperatures can be recorded by volcaniclastics with high fidelity. We have carried out a palaeomagnetic study of emplacement temperatures to investigate the role of igneous activity in the initiation of the 9,500 b.p. Murimotu sector collapse of Mt Ruapehu, New Zealand. This debris avalanche deposit has three fades which are stratigraphically superimposed, and the lowermost fades contains three lithological assemblages representing different segments of the edifice which were transported with little internal mixing within the flow. We have determined that some of the dacite-bearing assemblage 1, fades 1 was hot (∼350 °C) during transport and emplacement, whereas none of the other lithological assemblages of fades contained hot material. Our interpretation is that a dacite dome was active on the ancient Ruapehu edifice immediately prior to the Murimotu sector collapse. The partially cooled carapace of the dome and material shed from this part was incorporated into the avalanche deposit, along with cold lavas and volcaniclastics. We have not found evidence for incorporation of material at or close to magmatic temperatures, at least in the sampled locations. Our palaeomagnetic work allows us to develop a comprehensive, new palaeomagnetic classification of volcaniclastics. Published online: 25 January 2003 Editorial responsibility: D. Dingwell