Contrasting the chemical evolution of the Milky Way and Andromeda

The chemical evolution history of a galaxy hides clues about how it formed and has been changing through time. We have studied the chemical evolution history of the Milky Way (MW) and Andromeda (M31) to find which are common features in the chemical evolution of disc galaxies as well as which are galaxy-dependent. We use a semi-analytic multizone chemical evolution model. Such models have succeeded in explaining the mean trends of the observed chemical properties in these two Local Group spiral galaxies with similar mass and morphology. Our results suggest that while the evolution of the MW and M31 shares general similarities, differences in the formation history are required to explain the observations in detail. In particular, we found that the observed higher metallicity in the M31 halo can be explained by either (i) a higher halo star formation efficiency (SFE), or (ii) a larger reservoir of infalling halo gas with a longer halo formation phase. These two different pictures would lead to (i) a higher [O/Fe] at low metallicities, or (ii) younger stellar populations in the M31 halo, respectively. Both pictures result in a more massive stellar halo in M31, which suggests a possible correlation between the halo metallicity and its stellar mass.     

In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Barotropic Response of the Sea of Okhotsk to Wind Forcing

We have examined wind-induced circulation in the Sea of Okhotsk using a barotropic model that contains realistic topography with a resolution of 9.25 km. The monthly wind stress field calculated from daily European Centre for Medium-Range Weather Forecasting (ECMWF) Re-Analysis data is used as the forcing, and the integration is carried out for 20 days until the circulation attains an almost steady state. In the case of November (a representative for the winter season from October to March), southward currents of velocity 0.1–0.3 m s⁻¹ occur along the bottom contours off the east of Sakhalin Island. The currents are mostly confined to the shelf (shallower than 200 m) and extend as far south as the Hokkaido coast. In the July case (a representative for the summer season from April to September), significant currents do not occur, even in the shallow shelves. The simulated southward current over the east Sakhalin shelf appears to correspond to the near-shore branch of the East Sakhalin Current (ESC), which was observed with the surface drifters. These seasonal variations simulated in our experiments are consistent with the observations of the ESC. Dynamically, the simulated ESC is interpreted as the arrested topographic wave (ATW), which is the coastally trapped flow driven by steady alongshore wind stress. The volume transport of the simulated ESC over the shelf reaches about 1.0 Sv (1 Sv = 10⁶ m³s⁻¹) in the winter season, which is determined by the integrated onshore Ekman transport in the direction from which shelf waves propagate. This revised version was published online in July 2006 with corrections to the Cover Date.     

Recovery of thermohaline circulation under CO2 stabilization and overshoot scenarios

In this study we examine the behavior of the thermohaline circulation, as simulated by the Community Climate System Model version 3 (CCSM3), for several centuries following CO₂ stabilization for the SRES B1 and A1B scenarios and for an “overshoot” scenario in which CO₂ levels temporarily reach the same level as in the A1B scenario before declining to an ultimate stabilization level that is identical to the B1 case. While we find no evidence for irreversible changes of the thermohaline circulation in the overshoot experiment, the interplay of the different timescales of the temperature response of the surface and interior ocean does lead to a number of differences in the long-term response of the ocean between it and the B1 stabilization scenario where the same GHG levels are approached by different paths. The stronger initial warming and its slow penetration into the deeper ocean, followed by a transient surface cooling in the overshoot scenario leads to lower static stability, deeper mixing, and a more rapid recovery of the thermohaline circulation than in the B1 stabilization scenario. While the overshoot scenario recovers surface conditions (e.g. SST, sea ice extent) very similar to the B1 scenario shortly after reaching the same GHG levels, the additional accumulation of heat in the interior ocean during the period of higher forcing causes the global mean ocean temperature and steric sea level to remain higher than in the B1 stabilization scenario for at least another several centuries.     

Bioenhancement of cadmium transfer along a multi-level food chain

Previous studies have shown that metal partitioned to a subcellular compartment containing trophically available metal (TAM) is readily available to predators and may be enhanced by increased binding of metal to heat-stable proteins (HSP - e.g., metallothioneins). The aim of the current investigation was to determine the influence of TAM on the trophic transfer of Cd along an experimental, three-level food chain: Artemia franciscana (brine shrimp)-->Palaemonetes pugio (grass shrimp)-->Fundulus heteroclitus (mummichog). P. pugio were fed for 7 days on A. franciscana exposed to Cd in solution (including (109)Cd as radiotracer) and subjected to subcellular fractionation or fed to F. heteroclitus. An HSP-driven increase in the percentage of Cd associated with TAM (TAM-Cd%) in A. franciscana exposed to 1 muM Cd resulted in a bioenhancement (i.e., a greater than linear increase with respect to A. franciscana exposure) of Cd trophic transfer to P. pugio. Increased dietary Cd exposure did not affect TAM-Cd% in P. pugio nor trophic transfer to F. heteroclitus.     

Ecologic and taxonomic diversification in the Mesozoic brackish-water bivalve faunas in Japan, with emphasis on infaunalization of heterodonts

Mesozoic brackish-water bivalve faunas in Japan diversified in three steps: at the beginning of the Early Jurassic, Early and Late Cretaceous. The Hettangian Niranohama Fauna in northeastern Honshu represents the establishment of a heterodont-dominated brackish-water fauna that persisted until the early Late Cretaceous. No similar composition is known from the Triassic. The infauna consists mostly of non-siphonate and some short-siphonate heterodonts, while the epifauna is represented by diverse pteriomorphian families. In the Early Cretaceous Tetori Group in central Honshu, the long-siphonate heterodonts Tetoria (Corbiculidae) and the semi-infaunal soft-bottom oyster Crassostrea appeared. The evolutionary diversification of the latter, known as the most important element of modern brackish-water faunas, may thus originate at that time. In the early Late Cretaceous (Cenomanian) of the Goshoura and Mifune Groups in west Kyushu, several euryhaline deep-burrowing heterodont families, such as Veneridae and Tellinidae, further diversified in the brackish and marine environments. The Late Cretaceous is characterized by massive shell biolithic beds in which large Crassostrea species are common, a feature common for Cenozoic brackish-water faunas. The long-term changes in the composition of the brackish-water faunas in Japan represents thus an evolutionary record, irrespective of the severe physiological and environmental conditions imposed on the highly conservative nature of the fauna.     

Thermodynamic modelling of sodic pyroxene solid-solution and its application in a garnet-omphacite-kyanite-coesite geothermobarometer for UHP metamorphic rocks

A garnet-omphacite-kyanite-coesite geothermobarometer is constructed to estimate the peak metamorphic pressure of ultrahigh-pressure (UHP) eclogites. For this we use a quaternary regular solution model for garnet, and propose a new model for sodic pyroxene that assumes double site solid-solution (Na,Ca)^M2(Al,Fe³⁺,Fe²⁺,Mg)^M1Si₂O₆, where cations in the M2- and the M1-sites mix randomly but with inter-site interactions, not only between nearest neighboring cations but also between next nearest neighboring cations. In the new model, overall excess interaction parameters are quantitatively deduced from the previous experimental data and critical temperature, and the activity of the jadeite component agrees reasonably with that based on the Landau theory. Furthermore, the relations of the calculated order parameter to temperature and composition are consistent with other experimental works. These facts support the usefulness of the new model. Application of our geothermobarometer to kyanite eclogite gave metamorphic conditions around 3.4 GPa and 800 ^∘C for both samples from the Dora Maira Massif, Western Alps, and from Rongcheng County, in the Su-Lu region of eastern China. Received: 30 December 1996 / Accepted: 25 August 1997     

Stress‐dependent elastic wave velocity of microfractured sandstone

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Ferric iron partitioning between plagioclase and silicate liquid: thermodynamics and petrological applications

A series of Fe and Mg partition experiments between plagioclase and silicate liquid were performed in the system SiO₂-Al₂O₃-Fe₂O₃-FeO-MgO-CaO-Na₂O under oxygen fugacities from below the IW buffer up to that of air. A thermodynamic model of plagioclase solid solution for the (CaAl,NaSi,KSi)(Fe³⁺,Al³⁺)Si₂O₈-Ca(Fe²⁺,Mg)Si₃O₈ system is proposed and is calibrated by regression analysis based on new and previously reported experimental data of Fe and Mg partitioning between plagioclase and silicate liquid, and reported thermodynamic properties of end members, ternary feldspar and silicate liquid. Using the derived thermodynamic model, FeO^t, MgO content and Mg/(Fe^t+Mg) in plagioclase can be predicted from liquid composition with standard deviations of ǂ.34 wt% (relative error =9%) and ǂ.08 wt% (14%) and ǂ.7 (8%) respectively. Calculated Fe³⁺-Al exchange chemical potentials of plagioclase, m_{Fe^{3 +} ( Al )- 1} ^Pl{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Pl}} agree with those calculated using reported thermodynamic models for multicomponent spinel, m_{Fe^{3 +} ( Al )- 1} ^Sp{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Sp}} and clinopyroxene, m_{Fe^{3 +} ( Al )- 1} ^Cpx{\rm \mu }_{{\rm Fe}^{{\rm 3 + }} \left( {{\rm Al}} \right)_{{\rm - 1}} }^{{\rm Cpx}} . The FeO^t content of plagioclase coexisting with spinel or clinopyroxene is affected by Fe³⁺/(Fe³⁺+Al) and Mg/(Fe+Mg) of spinel or clinopyroxene and temperature, while it is independent of the anorthite content of plagioclase. Three oxygen barometers based on the proposed model are investigated. Although the oxygen fugacities predicted by the plagioclase-liquid oxygen barometer are scattered, this study found that plagioclase-spinel-clinopyroxene-oxygen and plagioclase-olivine-oxygen equilibria can be used as practical oxygen barometers. As a petrological application, prediction of plagioclase composition and f_O2 are carried out for the Upper Zone of the Skaergaard intrusion. The estimated oxygen fugacities are well below QFM buffer and consistent with the estimation of oxidization states in previous studies.