Fracture response of fibre-reinforced materials with macro/microcrack damage using the Boundary Element Technique

The Boundary Element Method (BEM) incorporating the Embedded Cell Approach (ECA) has been used to analyse the effects of constituent material properties, fibre spatial distribution and microcrack damage on the localised behaviour of transversely fractured, unidirectional fibre-reinforced composites. Three specific composites, i.e., glass fibre reinforced polyester, carbon fibre reinforced epoxy and a glass-carbon hybrid, are considered. The geometrical structures examined were perfectly periodic, uniformly spaced fibre arrangements in square and hexagonal embedded cells. In addition, numerical simulations were also conducted using embedded cells containing randomly distributed fibres. The models involve both elastic fibres and matrix, with the interfaces between the different phases being fully bonded. The results indicate that the constituent material properties (two phase composite) and spatial distribution have a significant effect on the localised stress distributions around the primary crack tip. However, the strain energy release rate associated with crack propagation is predominantly influenced by the material composition. The three-phase hybrid composite exhibited an apparent intermediate fracture toughness value, compared to the all-glass and all-carbon models. Furthermore, the strain energy release rate for the macrocrack lowers as it enters a zone of localised damage (microcracking). The presence of microcracks relaxes the stress field, which can result in a significant reduction in the energetics of the primary crack.     

Surface and interface properties of PdCr/SiC Schottky diode gas sensor annealed at 425°C

The surface and interface properties of Pd_0.9Cr_0.1/SiC Schottky diode gas sensors both before and after annealing are investigated using Auger electron spectroscopy (AES), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). At room temperature the alloy reacted with SiC and formed Pd_xSi only in a very narrow interfacial region. After annealing for 250 h at 425°C, the surface of the Schottky contact area has much less silicon and carbon contamination than that found on the surface of an annealed Pd/SiC structure. Palladium silicides (Pd_xSi) formed at a broadened interface after annealing, but a significant layer of alloy film is still free of silicon and carbon. The chromium concentration with respect to palladium is quite uniform down to the deep interface region. A stable catalytic surface and a clean layer of Pd_0.9Cr_0.1 film are likely responsible for significantly improved device sensitivity.     

Risk factors associated with recidivism among extrafamilial child molesters.

This study examined the predictive efficacy of 10 rationally derived, archivally coded variables for assessing reoffense risk among extrafamilial child molesters. Follow-up data on 111 child molesters who were discharged from the Massachusetts Treatment Center between 1960 and 1984 were used. Degree of sexual preoccupation with children, paraphilias, and number of prior sexual offenses predicted sexual recidivism. Juvenile and adult antisocial behavior, paraphilias, and low amount of contact with children predicted nonsexual victim-involved and violent recidivism. Area under the receiver-operating characteristic curves in all three analyses indicated discrimination that was substantially better than chance, ranging from .73 to .79. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tolerance of volunteers to cyclosporine A-dilauroylphosphatidylcholine liposome aerosol

Cyclosporine A (CsA) in liposomes of dilauroylphosphatidylcholine (DLPC), containing 118 micrograms of CsA/L of aerosol with a particle size of 1.6 to 1.7 micron diameter, was inhaled by 10 nonsmoking, normal volunteers each for 45 min. Aerosol was administered through an Aerotech II nebulizer (CIS-US, Inc., Bedford, MA) mouthpiece. Eight of the 10 volunteers had tracheal irritation and intermittent coughing following exposure. FEV1 and FVC values were mildly reduced, but returned to normal in 1 h. Blood chemical and hematologic values were unchanged at any time point after as opposed to before inhalation. Nine of the 10 volunteers later inhaled DLPC only, administered through the nebulizer mouthpiece. There was no change in FEV1 or FVC values, and there was no coughing or tracheal irritation. Subsequently, five of the volunteers who had previously had respiratory reactions inhaled CsA-DLPC liposome aerosol for 45-min, but through a mouth-only face mask. There was no tracheal irritation, coughing, or changes in spirometric measures. Blood concentrations of CsA at 15 min after the 45-min inhalation with a face mask averaged 83 +/- 42 ng/ml (mean +/- SD). At 24 h after treatment, CsA was undetectable in blood of the initial 10 volunteers. These studies indicate that CsA-DLPC liposome aerosol can be safely explored as a treatment for patients with moderately severe asthma.