Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.     

An investigation of grain boundary sliding in superplasticity at high elongations

Experiments were performed on the superplastic Zn-22% Al eutectoid alloy to determine the contribution of grain boundary sliding at both low (35%) and high (235%) elongations. The tests were conducted at two different strain rates in the superplastic Region II, and the results show that, within the accuracy of the measurements, there is a large sliding contribution at both elongations. By taking detailed measurements of both the magnitude of the sliding offset and the type of interface, it is shown that the average offsets are generally a maximum at the Zn-Zn boundaries, there is less sliding at the Zn-Al interfaces, and the offsets are a minimum at the Al-Al boundaries. In addition, the distributions of the magnitudes of the sliding offsets are similar at both the low and high elongations. It is concluded that grain boundary sliding is an important deformation process in the superplastic Region II and that it remains important even when the elongation is very high. The nature of the results indicates also that experimental observations of the deformation behaviour in superplastic materials at low elongations (up to 50%) provide meaningful information on the behaviour at much higher (superplastic) elongations.On leave from Mechanical Engineering Department, Nanjing Aeronautical Institute, Nanjing, Jiang-su 210002, People's Republic of China.     

The ChaLearn gesture dataset (CGD 2011)

This paper describes the data used in the ChaLearn gesture challenges that took place in 2011/2012, whose results were discussed at the CVPR 2012 and ICPR 2012 conferences. The task can be described as: user-dependent, small vocabulary, fixed camera, one-shot-learning. The data include 54,000 hand and arm gestures recorded with an RGB-D \(\hbox {Kinect}^\mathrm{TM}\) camera. The data are organized into batches of 100 gestures pertaining to a small gesture vocabulary of 8–12 gestures, recorded by the same user. Short continuous sequences of 1–5 randomly selected gestures are recorded. We provide man-made annotations (temporal segmentation into individual gestures, alignment of RGB and depth images, and body part location) and a library of function to preprocess and automatically annotate data. We also provide a subset of batches in which the user’s horizontal position is randomly shifted or scaled. We report on the results of the challenge and distribute sample code to facilitate developing new solutions. The data, datacollection software and the gesture vocabularies are downloadable from http://gesture.chalearn.org. We set up a forum for researchers working on these data http://groups.google.com/group/gesturechallenge.     

Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size

An Al-3% Mg solid solution alloy was subjected to intense plastic deformation, using either equal-channel angular (ECA) pressing or torsion straining, to produce grain sizes in the submicrometer range. Static annealing at elevated temperatures led to grain growth and average grain sizes of up to > 100 μm. As-fabricated and statically annealed specimens were used to determine the variation in microhardness with grain size, and results confirm that the Hall-Petch relationship persists down to at least the finest grain size examined experimentally (∼90 nm). The results provide no evidence to support the claims of a negative Hall-Petch slope when the average grain size is very small, but there is evidence of a decrease in the slope of the Hall-Petch plot at the very finest grain sizes (< 150 nm); this is attributed to the increased participation of mobile extrinsic dislocations in the boundary regions when taking the hardness measurements.     

Executive Perspectives on Top Risks for 2015

This article summarizes the results of Executive Perspectives on Top Risks for 2015, a study conducted by North Carolina State University’s ERM Initiative and Protiviti. For more information, visit www.protiviti.com/TopRisks.     

Multimodal Intelligent Eye-Gaze Tracking System

This article presents a series of user studies to develop a new eye-gaze tracking–based pointing system. We developed a new target prediction model that works for different input modalities and combined the eye-gaze tracking–based pointing with a joystick controller that can reduce pointing and selection times. The system finds important applications in cockpit of combat aircraft and for computer novice users. User studies confirmed that users can perform significantly faster using this new eye-gaze tracking–based system for both military and everyday computing tasks compared to existing input devices. As part of the study it was also found that the amplitude of maximum power component obtained through Fourier Transform of pupil signal significantly correlates with selection times and perceived cognitive load of users in terms of Task Load Index scores.     

Scaling of program functionality

The distribution of fitness values (landscapes) of programs tends to a limit as the programs get bigger. We use Markov chain convergence theorems to give general upper bounds on the length of programs needed for convergence. How big programs need to be to approach the limit depends on the type of the computer they run on. We give bounds (exponential in N, N log N and smaller) for five computer models: any, average or amorphous or random, cyclic, bit flip and four functions (AND, NAND, OR and NOR). Programs can be treated as lookup tables which map between their inputs and their outputs. Using this we prove similar convergence results for the distribution of functions implemented by linear computer programs. We show most functions are constants and the remainder are mostly parsimonious. The effect of ad-hoc rules on genetic programming (GP) are described and new heuristics are proposed. We give bounds on how long programs need to be before the distribution of their functionality is close to its limiting distribution, both in general and for average computers. The computational importance of destroying information is discussed with respect to reversible and quantum computers. Mutation randomizes a genetic algorithm population in generations. Results for average computers and a model like genetic programming are confirmed experimentally.     

Effect of Initial Annealing Temperature on Microstructural Development and Microhardness in High‐Purity Copper Processed by High‐Pressure Torsion

The effect of the initial annealing temperature on the evolution of microstructure and microhardness in high purity OFHC Cu is investigated after processing by HPT. Disks of Cu are annealed for 1 h at two different annealing temperatures, 400 and 800 °C, and then processed by HPT at room temperature under a pressure of 6.0 GPa for 1/4, 1/2, 1, 5, and 10 turns. Samples are stored for 6 months after HPT processing to examine the self‐annealing effects. Electron backscattered diffraction (EBSD) measurements are recorded for each disk at three positions: center, mid‐radius, and near edge. Microhardness measurements are also recorded along the diameters of each disk. Both alloys show rapid hardening and then strain softening in the very early stages of straining due to self‐annealing with a clear delay in the onset of softening in the alloy initially annealed at 800 °C. This delay is due to the relatively larger initial grain size compared to the alloy initially annealed at 400 °C. The final microstructures consist of homogeneous fine grains having average sizes of ≈0.28 and ≈0.34 µm for the alloys initially annealed at 400 and 800 °C, respectively. A new model is proposed to describe the behavior of the hardness evolution by HPT in high purity OFHC Cu.