Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Removal of impurities from liquid solutions by vacuum desorption with solvent evaporation

Mass transfer with solvent evaporation in the vapor-liquid two-phase film evaporators used for the removal of undesirable impurities from liquid solutions at low pressure is studied. The average concentrations of solution components in the falling liquid film are determined. The most efficient operating conditions for impurity removal, in which the resistance to mass transfer is concentrated in the liquid phase, are found. Original Russian Text ? V.N. Babak, T.B. Babak, L.P. Kholpanov, 2008, published in Teoreticheskie Osnovy Khimicheskoi Tekhnologii, 2008, Vol. 42, No. 6, pp. 654–670.     

On the modal incremental dynamic analysis

In this article a new technique for the dynamic response of structures is investigated. This applied procedure can predict the approximate seismic performance of the structures and it is fast, inexpensive and results are reasonably acceptable. In fact, this novel method logically combines two different techniques, ‘incremental dynamic analysis (IDA)’ and ‘modal pushover analysis (MPA)’, presented by other researchers. This method will take advantage of both methodical ideas such as equivalent single degree of freedom of multi‐degree structures and the implementation of different scaled level of an earthquake record to the provided equivalent SDF structure. Using this procedure, simple approximate curves that present a realistic linear and non‐linear seismic behaviour of the structure due to the applied scaled level of earthquakes can easily be extracted. In this investigation, several four‐, eight‐ and 12‐storey structures are specified as the example models and are dynamically analysed. Next, three different scaled earthquakes, El Centro, Northridge and San Fernando, are applied to each example problem. The results of the presented technique, modal incremental dynamic analysis (MIDA), are then compared with the IDA method. Comparison of the results reveals good accuracy in building seismic demands evaluation. Finally, it is also shown that the MIDA method is simple enough to be carried out on most personal computers and the authors believe this technique will serve design engineers working in real design conditions. Copyright © 2005 John Wiley & Sons, Ltd.     

Agent-oriented techniques for network supervision

This paper presents the results of the Réseau futé (smart net) project, the goal of which is to use distributed AI and multi-agent techniques for network management and supervision. More precisely, these techniques have been applied to the partial automation of the dynamic processing (what is known about a network is always incomplete and can change at any time) of alarms and of various event notifications received by network management platforms. The system that we propose is able for example to automatically handle some alarms or to filter events of no-interest for a given operator. To achieve this goal, an assistant, or interface agent according to the model proposed by Patti Maes [MK93], has been realized. The goal of the assistant is first to learn, by observation, the behavior of the network supervision operator and second to reproduce such a behavior when the conditions in which the behavior has been learned are detected again. The learned information are stored using chronicles [Gha94]. A chronicle is a data-structure allowing programmers to represent sequences of events while taking temporal knowledge into account. Our assistant has been implemented and tested within Magenta which is a program, written in Smalltalk, that simulates (in a simplified way) a network management platform. This program respects roughly the gdmo and cmis standards.     

Preparation,characterization, and some physical properties of polypropylene/poly(methyl acrylate)‐grafted glass wool composites

Polypropylene/poly(methyl acrylate)‐grafted glass wool (PMA‐g‐GW) mixes were prepared. The polymerization process was carried out using potassium persulfate (PPS) and PPS/acetone sodium bisulfite (ASBS) as a redox‐pair initiation system at 60 and 70°C. The effect of using PPS or PPS/ASBS on the grafting percent and conversion percent reveals that the conversion percent values on using PPS as an initiator are higher than those of PPS/ASBS, while in the case of grafting, the inverse is true, that is, using PPS as an initiator gives grafting percent values lower than those that can be obtained using PPS/ASBS. The dielectric properties, thermal diffusivity, specific heat capacity, and thermal conductivity of PP loaded with modified glass wool as a function of different types and concentrations of initiators—used in the grafting polymerization process, namely, PPS and the redox initiating system—were also studied. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 723–732, 2003     

Aluminum-27 and Silicon-29 Magic-Angle Spinning Nuclear Magnetic Resonance Study of the Kaolinite-Mullite Transformation

The ²⁷Al and ²⁹Si magic-angle spinning nuclear magnetic resonance (MAS-NMR) study of the kaolinite-mullite transformation has shown the presence of Al in tetra- and pentacoordination in dehydroxylated kaolinite. The ²⁹Si NMR signal analysis of samples heated above 400°C demonstrates that the tetrahedral sheet of kaolinite begins to break down near 600°C and continues to do so to 900°C. From the ²⁷Al NMR signal evolution, it can be deduced that the exothermic peak at 980°C in DTA curves is associated with the modification of the coordination of Al, which changes from the tetra- or pentacoordination to the more stable octahedral coordination. Heating the sample at 880°C for 36 h produces the same transformation in the coordination of Al ions and the elimination of the exothermic peak at 980°C in the DTA diagram. After this transformation, all spectra show two tetrahedral lines characteristic of mullite, indicating that nuclei of mullite with low crystallinity are generated during the exothermic process which are not detected by XRD. At higher temperatures tetrahedral NMR peaks increase in intensity, yielding, at 1200°C, the 3:2 mullite NMR spectrum.     

A new image encryption scheme with Feistel like structure using chaotic S-box and Rubik cube based P-box

Multimedia Tools and Applications - In this paper, a novel chaos-based dynamic encryption scheme with a permutation-substitution structure is presented. The S-boxes and P-boxes of the scheme are...     

A bio-inspired gelatin-based pH- and thermal-sensitive magnetic hydrogel for in vitro chemo/hyperthermia treatment of breast cancer cells

Gelatin (Gel)-based pH- and thermal-responsive magnetic hydrogels (MH-1 and MH-2) were designed and developed as novel drug delivery systems (DDSs) for cancer chemo/hyperthermia therapy. For this goal, Gel was functionalized with methacrylic anhydride (GelMA), and then copolymerized with (2-dimethylaminoethyl) methacrylate (DMAEMA) monomer in the presence of methacrylate-end capped magnetic nanoparticles (MNPs) as well as triethylene glycol dimethacrylate (TEGDMA; as crosslinker). Afterward, a thiol-end capped poly(N-isopropylacrylamide) (PNIPAAm-SH) was synthesized through an atom transfer radical polymerization technique, and then attached onto the hydrogel through “thiol-ene” click grafting. The preliminary performances of developed MHs for chemo/hyperthermia therapy of human breast cancer was investigated through the loading of doxorubicin hydrochloride (Dox) as an anticancer agent followed by cytotoxicity measurement of drug-loaded DDSs using MTT assay by both chemo- and chemo/hyperthermia-therapies. Owing to porous morphologies of the fabricated magnetic hydrogels according to scanning electron microscopy images and strong physicochemical interactions (e.g., hydrogen bonding) the drug loading capacities of the MH-1 and MH-2 were obtained as 72 ± 1.4 and 77 ± 1.8, respectively. The DDSs exhibited acceptable pH- and thermal-triggered drug release behaviors. The MTT assay results revealed that the combination of hyperthermia therapy and chemotherapy has synergic effect on the anticancer activities of the developed DDSs.